AUCTION DAY:		WEDNESDAY, JUNE 22ND - 8AM
Preview Day:		Tues., June 21st, 9am – 5pm or by appointment
Location:		16 McCool Cresc., Crossfield (Calgary), Alberta

Contact:		Ken Ardiel
Phone:		(604) 530-9351
Fax:		(604) 530-0194
E-mail:		kardiel@tradewestsales.com

Last updated: Monday, June 20, 2011 - 5:20 PM Pacific Time

Download auction brochure
Adobe PDF (0.98 MB)

Download auction catalogue
Adobe PDF (230 KB)

Note: Plant is comprised of 3 distinct and complete lines, each available for private sale prior to auction. Please contact Ken Ardiel at Tradewest for viewing & pricing.

SYSTEM TM OPTIMIZING LINE

System TM Optimizing Line:

6 Run Unscrambler, 14' - 16' x 5'; C2080 Chain w/ Flights, 30" OC 1/8" Deck 32 S.F. 1/8"; 5 HP gear motor, RC80
6 Run Transfer From Unscrambler To Scanner Line, 16'x17'; S-Drive; C2060 Chain, Plastic Chainway 2"X4" Tube Steel Runners, 1-15/16" Shaft, 3 HP gear motor RC60; w/ 3 - 6 Arm Stops
Luxscan Combiscan C600 Color Single Gap Scanner 4 IVP Smart Cameras; 4 Sided Profile Inspection; (2) Baumer Color Cameras, Top/Bottom Inspection; 2 Section Cabinet, Moveable Axis w/ Infeed/Outfeed Belts - 9"X34"; 4 Hold Down Wheels, (2) 2.2 Kw gear motors
Luxscan Computers: Gamymed Computers, Dual 250 Gb Hard Drive, Dual 1 Gb Ram, Windows XP; (2) Viewsonic E-70 Monitors, (2) Rittal 24"X72" Cabinets; Rittal 24x24 Cabinet; MGE UPS Pulsar M2200
System TM Automatic Cut Off Chop Line: Scanner Outfeed Table, 5' x 22'; Type 212 Del No. 08;
(12) Run Shaft Gravity Rolls, Round Belts; (10) Lug Chains-6' (12 Capacity); (2) 2.2 Kw gear motors,
6 Belt Transfer From Scanner Landing Table, 15'x10'; Type 63 Del. Nr. 09; 3" Belts 6 Drop Out Belts-2', 5-6 Arm Stops; Driven By: 1-1.1 Kw gear motor, 3-6 Belt Infeed Transfers To Saws, 15'x5'; Type 63 Del. Nr. 9, 12, 14; 3" Belts, each w/ 1.1 Kw gear motor; w/ 3 - 6 Arm Stops, (2) 6 Belt Overhead Transfers To Saws, 15' x 8'; Type 63 Del. Nr. 11, 13 3" Belts; (6) Drop Out Belts - 2'; Each w/ 4.1 Kw gear motor; w/ 4 - 6 Arm Stops;
(3) System TM Auto Cut Off Saws: Opti-Kap 4003 Type: 704; Each w/ 6.9 Kw, 9.7, 7.5 Kw Motors, w/ Dust Pipe, Each w/ 1 Infeed Table; Type: 215 Each w/ Refuse Belt, 1' x 10.5'; Type: 234, Each Driven by .55 Kw gear motor; (3) Cut Off Saw Outfeed Belts 10" x 94'; Type: 293; Each Driven by 2.2 Kw gear motor; Each w/ 2 side Air Kickers; Each w/ Double Rotary Kicker, Each Driven By (2) 1.5 Kw gear motors; Each w/ 5 Belt Decline To Sorter Line 12' x 6'; Type: 63 Del. Nr. 24, 25, 26, 3" Belts; (5) 5 Arm Stops, Each Driven By .55 Kw gear motor; Each w/ Steel Landing Table, 2.5' x 16' x 2.5' x 3.5'; Type: 730 w/ scanner & Controls.
(4) System TM Custom Made Computers Windows XP. Lucidyne M5 Grade Mark Reader, Multiple Instructions & Color Recognition, Control Comp; With Spare 24"X60" Rittal Cabinet.
Landing Belts From Cut Off Saws, 66” x 25'; 2 HP gear motors, RC60

System TM Stacker Lines:

(3) System TM Stackers: (2) 6’ Infeed Belts, 8' 2 Side Drop Arms, 5 Arm Hoist; Each w/ (4) .44 Kw gear motors, (1)1.5 Kw gear motor; Each w/ 4 Outfeed Chains, 11'; 2 Air Pods, Each Driven By .37 Kw gear motor
Stacker OutfeedRollcase, 5' x 38'; (34) Pipe Rolls - 4" X 55"; 1-7/16" Shafts; RC60 Drives, Driven By: 2 HP gear motors RC60
(2) Stacker OutfeedRollcases, 5'x21'; (19) Pipe Rolls, 2 HP RC60 gear motor
Stacker OutfeedRollcase, 5'x13'; (12) Pipe Rolls, 1 HP gear motor
Stacker OutfeedRollcase, 5' x 21'; (19) Pipe Rolls, 2 HP RC60 gear motor

Planer Line:

3 Run Infeed Transfer From Yard, 13' x 12', S-Drive; 81X HD Chain; 7.5 HP RC80 gear motor
3 Run Transfer To Even Ending Transfer, 13' x 20', S-Drive; 81XD Chain; 2-7/16" Shaft; 7.5 HP & RC100 Reducer
3 Run Even Ending Transfer To Tilt Hoist, 13' x 11'; S-Drive; 81X HD Chain; 5 HP w/ RC80 Reducer; (7) Pipe Rolls-6"X54"; (6) RC80 Drives, 2 HP gear drive •
Tilt Breakdown Hoist, 12' Span, 4.5' Lift, 4 Arms-4.5', 15HP gear motor, TB Woods E-Trac X4 AC Drive
Elevated 4 Run Transfer To Unscrambler, 15' x 15'; 81X Chain; 5 HP RC80 gear motor
5 Run Elevated Transfer from Unscrambler To Planer Infeed, 14' x 15'; 81X Chain; 3 HP 87 RPM RC80 gear motor
6 Run Transfer To Planer Infeed, 14' x 4'; C2080 Chain; 2 HP RC80 gear motor
Woods Planer Feed Table, 3' x 22'; (2) Pipe Rolls - 10" x 29"; (3) Spiral Pipe Rolls, 10" x 29"; Spiral Roll - 10"X26", (2) Pineapple Rolls, (2) Press/Feed Rolls - 10" x 4"; w/ Gilbert 6 Drive Line Drive Unit; 40 HP Motor, reducer & 4' Quad crowder Chain, 3 HP; Planer bridge,2 ' x1'; (4) Pipe Rolls, 10" x 14", Press Feed Roll, 10" X 4"; 10' Hydraulic Line Bar, w/ Gilbert 2 Line Shaft Drive Unit, (2) 7.5 HP gear motors; 7.5HP Hydraulic Power Unit
Stetson 6-10-A1 Ross Planer/Matcher; 15"X8"; w/ profilers; (6) 25 HP 3600 RPM Drives; 15 HP 3600 RPM Motor; Gilbert Infeed 4 Drive Line Unit, 40HP; & Gilbert Outfeed 2 Drive Line Unit, 20 HP; Planer Brake; 800'/min.

Secondary Entry from Yard:

3 Run Secondary Entry Transfer, 13' x 11'; S-Drive; 81X HD Chain, 7.5 HP w/ RC100 reducer
3 Run Transfer, 13' x 20'; S-Drive, 81X HD Chain; 7.5 HP
3 Run Even Ending Transfer, 13' x 11', S-Drive; 81X HD Chain; 5 HP w/ reducer, RC100 w/ (7) even ending rolls - 6" X 54"; (2) RC80 Drives;
Tilt Breakdown Hoist, 12' Span, 4.5' Lift 4 Arms; 4.5' Lift, 4 Arms, 4.5'; 15 HP gear motor
4 Run Transfer From Tilt Hoist To Unscrambler, 15' x 9'; 81X Chain; 3 HP Motor & reducer RC60

SYSTEM TM SCANNER INFEEDS

SCANNER INFEED ROLLS

LUXSCAN COMBISCAN 600 SCANNER

SCANNER OUTFEED ROLLS

SCANNER OUTFEED ROLLCASE

SYSTEM TM CUT-OFF LINE,
(3) OPTI-KAP CHOP SAWS

1 OF 3 OPTI-KAP 4003 CHOP SAWS

1 OF 3 CHOP SAW OUTFEED BELTS

SYSTEM TM CHOP SAW
OUTFEED SYSTEM

(3) OUTFEED BELTS & SORT BELTS

(3) SORT BELTS

OUTFEED TO SORTER

NOTCHER RESAW UNSCRAMBLERS

1 OF 3 SYSTEM TM
OPTI-STACK 3000 STACKERS

(2) OUTFEED BELTS
FROM CHOP SAWS

LUXSCAN COMPUTERS & CONTROLS

LUCIDINE CONTROL

3 RUN INFEED TRANSFER, 13' X 21'

TILT HOIST & EVEN ENDING TRANSFER

4 RUN TRANSFER, 15' X 15'

4 RUN UNSCRAMBLER

WOODS PLANER INFEED ROLLCASE

WOODS INFEED INFEED
ROLLS & CROWDER

10' LINE BAR INFEED

GILBERT 6 DRIVE UNIT

GILBERT 2 DRIVE LINE UNIT

STETSON ROLL PLANER- MATCHER,
15'' X 8''

GILBERT 2 & 4 DRIVE LINE
UNITS FOR PLANER

5 RUN TRANSFER, 14' X 15'

(2) 3 RUN TRNASFERS

EVEN ENDING TRANSFER,
13' X 11'; 7 ROLLS

TILT HOIST, 12' X 4.5'

4 RUN TRANSFER, 15' X 9'

SORTER LINE

5 Run Lug Transfer, 12' x 27'; 81X lugged chain, Plastic Chainway
7 Run Incline Lug Transfer, 14' x 7'; 81X lug chain;
7 Run 14' Lug Ladder, 14' x 18'; 81X Lug Chain; 2-15/16" Shaft
5 Run Transfer To Corner Transfer, 12' x 3'; 81X Chain; RC120;
5 Run 8’ Corner Transfer, 13' x 28'; Rex 3500; Detachable Link Lug Chain, 4' OC Plastic Chainway; 1-15/16" Shaft, 2-7/16" Drive Shaft; (5) RC80 Drives
6 Run 10’ Transfer From Curved Transfer, 14' x 10'; 81X Lug Chain; 2-7/16" Shaft
7 Run 19’ Even Ending Transfer, 15' x 9'; 81X Lug Chain; 3-7/16" Shaft; (6) Pipe Rolls - 8" X 60"; Right Angle Drive
8 Run Lug Transfer To Sorter Chain, 42” x 16'; 81X Lug Chain; 2-7/16" Shaft;
Baldor 60HP Drive, 230/460V; Nordgear 16.47 Ratio, SK92W, 106 RPM reducer
Precision 18M RH Pop Up Chop Saw
Drop Sorter Bin: 16' x 10 Bins, Cable/Hydraulic; (5) 46’ Top Feed Lug Chains; 60 Hp Motor & Reducer; 10 HP Hydraulic Unit • 5 Run Outfeed Transfer, 10' x 58', S-Drive; 81X Chain; (2) 2-7/16" Shafts; 5 HP gear motor • 5 Run Incline To Unscrambler, 10' x 16'; 81X Chain; 2-7/16" Shaft; 5 HP & RC100 Reducer • 8 Run Unscrambler, 145' x 16' x 8' 81X Lug Chains, 16" OC 2-7/16" Shaft & Chain Wraps; 5 HP & RC100 Reducer • 6 Run Infeed To Stacker, 10' x 16'; 81X Rooftop Chain; 1-15/16" Shaft; 2HP RC80 gear motor; w/ side Chain, 5' Double RC80; Right Angle Drive
Stacker System-(5) 14’ Feed Chains-9', 5 Dealing Arms, 5 Arm Hoist; p/w 20 HP Hydraulic Unit, (2) Hydraulic Motors; Outfeed Rollcase, 5' x 35'; (14) Pipe Rolls, 6" x 54"; 1- 15/16" Shafts; RC80 Drives; 5 HP Motor & Reducer, RC80 • 2 Run Outfeed Transfer, 3' x 20'; 81X HD Chain; 2-3/16" Shaft; 3 HP Motor w/ Reducer, RC100; w/ Controls & Scanners
(East Refuse) Ribbed Refuse Belt, 12” x 31'; (5) Return Rolls, 3" X 12", 1- 7/16" shaft, 1.5 HP gear motor
Refuse Belt to Hog, 24” x 27'; (4) 1” Return Shafts; 2 HP; 68 RPM RC60 gear motor
Outside Belt, 18” x 40'; S-Drive; 1/2 HP 68 RPM RC60 gear motor
Incline Belt To Hog, 24” x 45'; S-Drive, covered trough; 1-7/16" Return Shaft; 1-3/16" Return Idler; RC80

5 RUN LUG TRANSFER TO 14'
INCLINE TRANSFER

90 DEGREE CORNER TRANSFER

SORTER INFEED TRANSFERS

10 BIN SORTER SYSTEM

6 RUN TRANSFER, 16' X 145'

6 RUN UNSCRAMBLER INFEED

8 RUN UNSCRAMBLER

STACKER INFEED SYSTEM

14' STACKER SYSTEM

5 ROLL STAMPING STATION

STACKER OUTFEED ROLLS

20HP HPU

STACKER SYSTEM OVERVIEW

CONTROLS & PLC

NOTCHER LINE

4 Run Unscrambler To Notcher Infeed Transfer, 6'x4'; C2060 Chain w/ Lugs; 1 HP gear motor, RC60
3 Run Grading Table 3.5' x 18'; C2060 Chain, 1 HP Motor 28:1 Eurodrive Gear box
3 Run Tipple Belt, 3.5' X 7'; w/ 2" Wide Rough Top Belt
3 Run Incline Transfer to Notcher, 3.5'x12'; C2060 Chain, 1-15/16" Shaft; 1 HP gear motor RC60, Stamping Roll
Hanna Sales (Per Newman M-472) Notcher, 6' 2 Head; Push Feed Arm (2) 30 HP Motors & 5 HP gear motor; Dust Pipe
3 Run Transfer From Notcher To Stacker, 42” x 15'; C2060 Chain; 1-15/16" Shaft; 1 HP gear motor, RC60

4 RUN UNSCRAMBLER, 6' x 4'

3 LINE GRADING TABLE, 3.5' X 18'

3 LINE TIPPLE BELT, 3.5' X 7'

HANA SAELES 6' 2 HEAD NOTCHER

3 LINE TRANSFER, .5' X 15'

OUTFEED LINE

2 Run Transfer, 30” x 30', S-Drive; 81X Chain; 5 HP Motor & RC80 Reducer; w/ Air Pod
Belt to Turntable, 3' x 38'; 36" Belt; 3 HP gear motor, RC60
Incline Belt To Incline To Turntable, 3' x 13'; 3 HP gear motor, RC60
Ribbed Incline Belt To Turntable, 24” x 6'; 2 HP gear motor RC60
Turntable 8' Dia., 1/8" Plate; 2-15/16" Center Shaft; 2 HP & Reducer

RESAW LINE

CMI 4 Run Transfer To Unscrambler To Producto Saw At Sorter, 4.5' x 6.5' x 13'; 81X Rooftop Chain; 3 HP Motor & Reducer, RC80
4 Run Unscrambler, 5' - 6.5' x 4'; C2060 Chain w/ Lugs; 1 HP gear motor, RC60
3 Run Transfer To Producto Resaw, 42” x 18'; C2060 Chain, Plastic Chainway; 1 HP gear motor,RC60; w/ 2 Arm Stop & (2) Grade Stamp Wheels
4 Run Unscrambler To #2 Producto Resaw, 6'x4'; C2060 Chain w/ Lugs; 1 HP gear motor RC60
3 Run Transfer To #2 Producto, 3.5' x 30'; C2060 Chain; 1-15/16" Shafts; 1 HP gear motor, RC60; 3 Arm Stop w/ 2 Grade Stamp Wheels
(2) Producto 76 Resaws; S/N 0111102-C; 4 Side Press Feed Rolls, Each w/ 50 HP 1800 RPM Motor V-Belt; (2) 5 HP Motors; Each w/ Infeed Belt, 24" x 15.5'; 2" Belt Each w/ 1 HP gear motor, V-Belt, & Outfeed Belts, 15" X 4.5' Belt, each w/ 1 HP gear motor, V-Belt
(2) Incline Belts To Stackers, 3.5' x 28'; 42" Belt, 1/8" Slider Base, 4" Channel Frame; 8" Pulleys Each w/ 2 HP gear motor, RC60

UNSCRAMBLER

4 RUN SURGE BIN

4 & 3 RUN TRANSFERS

2'' RESAW INFEED BELT

PRODUCTO 76 CIRCULAR RESAW

RESAW CONTROLS & ELECTRICS

OUTFEED SORT BELT

2 RUN SECONDARY OUTFEED

OUTFEED BELTS FROM CHOP SAWS

TURNTABLE INFEED BELT

C-LINE: TRIM SAWS & NOTCHERS

Lumber Package De-Stacker System, w/ Fork Hoist, Rails & Supports, Siemens Main Panel
3 Run Infeed Package Breakdown Transfer From Yard, 11' x 14'; WR124 Chain; 2- 15/16" Shaft; 5 HP w/ Reducer, Double RC80
2 Run Transfer To Even Ending Rollcase, 7' x 30'; S-Drive; WR124 Chain; (2) 2-15/16" Shafts; 7.5 HP Motor & Reducer, Double RC100 Drive;
Even Ending Rollcase, 4.5' x 13'; (4) Pipe Rolls, 8" X 51"; 1-15/16" Shafts, RC80 Drive; Pipe Roll, 4" X 51"; 1-7/16" Shaft; 5HP RC80 gear motor; w/ (4) Air Pods, 5 Chain transfer To Tilt Hoist, 7.5' RC80 Chain, Plastic Chainway; 1-7/16" Shaft, (10) Idler Sprockets; 5 HP RC80 gear motor
Hydraulic Tilting Scissor Lift, 4' x 16'; 10,000LB Capacity; (4) Feed Chains, 5' RC80 Chain, Hydraulic Motor; 15 HP Hydraulic Unit
Stacking Stick Outfeed Belt, 18” x 20'; 5 HP RC80 gear motor
4 Run Transfer From Tilt Hoist, 13' x 10'; H-138 Chain; 1-15/16" Shafts; 5 HP Motor & Reducer, RC80;w/ 4 Arm Stop, Air w/ 53 L.F. Skate Wheels, 2" X 1/2" X 1.5" OC
Custom Built Lug Loader, (6) 12' Feed Chains, 6 Arm 5.5', 6 Plastic Face Wheels, 8" X 3"; 6 Outfeed Chain, 1.5"; 3 HP gear motor
4 Run Lug Chain To Trimmer, 13' x 23'; 2060 Chain w/ Plastic Chainway; 1-15/16" Shaft; (2) Extra Chains, 10' OC; 5 HP RC80 gear motor, w/ (4) Custom Built Board Turners, Skate Wheels; 6 Arm Overhead Grade Stamper
Forestech Newly Rebuilt Custom Overcut Trimmer, 20' x 7 Shifting Saws; (12) 8’ Lug Chains; (7) 7.5 HP 1800 RPM Drives; 5 HP RC80 gear motor; Ribbed Refuse Belt, 16" X 26'; 3 HP gear motor; (Rebuilt May, 2011)
Newman Overcut KM-17-7 Trimmer, 20' x 7 Shifting Saws; (12) 4’ Lug Chains; (7) 7.5 HP 1800 RPM Drives; 3 HP RC60 gear motor; Refuse Belt, 12” x 27'; 3 HP RC60 gear motor, Cross Belt To Belt Below First Trimmer, 16"X9'; 3 HP RC80 gear motor (Completely Rebuilt In Spring 2010)
Incline Ribbed Refuse Belt, 16" X 16';
Sorting Belt, 24” x 35'; 1 HP RC60 gear motor
Ribbed Refuse Belt, 24” x 24'; 2 HP gear motor
Ribbed Outfeed Belts Below #1 Trimmer, 12” x 24'; each p/w 5 HP Motor & Reducer
Ribbed Belt Conveyor To Notcher Line,12” x 8'
Ribbed Belt Conveyor, 12” x 22'; 3 HP
Manually Fed Mini-Trimmer (Up To 6' Board), w/ (2) 2060 Chain Incline Lug Feed System; 2 HP Motor, (2) WEG 7.5 HP RH Saw Arbor Drives, Adjustable Widths From 30"-54"
4 Run Landing Transfer, 6.5' x 6'; C55B Rooftop Chain; 1-7/16" Shaft; 3 HP Motor & Reducer 1 RC6;
24" X 15' Belt From Trim Saw, Global Magnet
6 Run Unscrambler To Stacker, 6'-8' x 6'; C2060 Chain w/ Bar Flights, 1' OC; 1-7/16" Shafts; 1/2 HP RC60 gear motor
3 & 4 Run Transfer To Stacker, 6.5' x 22'; C55B Chain, 2 Lines - 22'L & 2 Lines - 13'L; 1 Line-9'L; 1-7/16" & 1-15/16" Shafts; 3 HP RC80 gear motor
Custom Built Stud Stacker, 10' 3 Feed Chain; 6' 3 Dealing Arms; Hydraulic Scissor Lift, 54"X120"; 20 HP Hydraulic Unit; (2) Hydraulic Motors; (13) Outfeed Pipe Rolls, 4" X 52"; 1-3/16" Shaft; RC60 Drives; (2) Hydraulic Motors; 10 HP Hydraulic Unit
Ribbed Belt Conveyor, 6" X 34'; 3 HP
Ribbed Belt Conveyor, 6" X 44'; 1-7/16" Shafts; 3 HP
4 Run Transfer To Notcher, 3.5' x 36'; C55b Chain; 3 HP Motor & RC80 Reducer
3 Ribbed Belt Transfer, 32” x 4'; 1-7/16" Shafts; 2 HP; w/ 2 Grade Stamp Wheels
4 Run Unscrambler To Notcher, 3' x 4'; C2060 Chain w/ plastic bar flights, 2 HP
Bob Hana Notcher, 6' x 2 Heads; Push Feed Arm; 3 HP Motor & Reducer; (2) 25 HP Motors
Custom Built Circular Resaw 4 Side Press Feed Rolls; 20 HP & (2)5 HP Motors
Infeed Belt, 2" x 14'8" Trough, 30" 2" Ribbed Belt 8" Dia. Pulleys Driven By: 1-1 HP Gearmotor V-Belt W/ 1 Outfeed Belt-10"X4.5' 10" Ribbed Belt 1/4" Slider Base W/ 1/16" Sides 4' Pulleys Driven By: 1-1 HP gear motor V-Belt
Outfeed Belt, 30” x 16'; 3 HP RC60 gear motor, • Incline Belt, 36” x 7'; 2 HP RC60 gear motor • 3 Run Transfer, 30” x 14'; C55b Chain; 1 7/16" Idler Shafts; 1-15/16" Shaft; 2 HP RC80 gear motor w/ 9’ Hold Down Skate Wheel Arms • 4 Belt Transfer To Resaw, 4' x 9'; 5" Ribbed Belts; 1-7/16" Shafts; 1HP RC60 gear motor; (2) Grade Stamp Wheels
Forestech 98-0220 Circular Resaw, 20" Blade; 4 Side Press Feed Rolls; (1) 20 HP & (2) 5 HP Motors • Ribbed Infeed Belt, 2" X 8'; 1 HP • Outfeed Belt, 14" X 4.5' 1 HP
Outfeed Sorting Belt, 36” x 25'; 2 HP
Ribbed Refuse Belt, 12” X 22'; 2 HP
Sorting Belt, 36” x 21'; 2 HP
Precision 14M Chop Saw; 5 HP; Infeed Bar w/ stops
Ribbed Refuse Belt, 14" X 39'; 5 HP
Ribbed Refuse Belt, 24” x 8'; 24"; 5 HP
Incline Belt To West Hog, 24” x 74'; S-Drive; 3 HP drive
Global Magnet, 21" x 30" x 11"

2 RUN TRANSFER, 7' X 30'

EVEN ENDING TRANSFER

HYD. TILT HOIST, 4' X 16'

STICK BELT, 18'' X 20'

4 RUN TRANSFER, 13' X 10'

12' CUSTOM LUG LOADER

TRIM SAW INFEEDS

OVERCUT TRIMMER, 20' X 7 SAWS

NEWMAN KM-16-A7 TRIMSAW

MINI TRIMMER, 6' MAX

MIN TRIMMER UNSCRAMBLER INFEED

TRIMMER OUTFEED BELTS

4 RUN TRANSFER, 3'6'' X 36'

NOTCHER UNSCRAMBLER INFEED

BOB HANA M-472 2 HEAD 6' NOTCHER

FORESTECH CIRCULAR RESAW

CUSTOM CIRCULAR RESAW

OUTFEED SORT BELT, 3' X 25'

OUTFEED SORT BELT, 3' X 21'

3 RUN RESAW INFEED

4 BELT RESAW INFEED

STACKER INFEED TRANSFER

CUSTOM 10' STUD STACKER

STACKER OUTFEED ROLLS

10HP HYD. POWER UNIT

1' X 24' RIBBED BELT

INCLINE BELT, 24'' X 74' & MAGNET

FENCING LINE

2 Run Package Breakdown Transfer, 36” x 15'; H78 Chain; "S" Drive; 3 HP 60:1 Gearbox
Tilt Hoist Infeed, 7.5 HP, AU 60:1 600 Radicon; Nexen Brake,
3 Chain Landing Table, 42" X 10'; C2060 Chain; 1 HP A 24:1 Gearbox,
Producto Dog Ear Saw: 3-Saws p/w (3) 7.5 HP arbor drives; 2 Incline Lug Chains, 42” x 10'; 2 HP Gear Motor; 2 Belt Decline Outfeed, -42” x 4.5'; 3" Ribbed Belts, 2 HP
Custom MSR Planer -4" X 4'; 4 Infeed Press Feed Rolls; 2 Side Heads p/w (2) 20 HP Drives, 2 Hydraulic Motors, Metal Sound Cover w/ hinged lid door, 5.5' x 5.5' x 6.5'; Infeed Belt, 6" X 10.5'; 2 HP
Producto 81 Circular Rip Saw 4 Side Press Feed Rolls, S/N 365-1092; 20 HP; 7.5 HP Hydraulic Unit; 2 Hydraulic Motors;
Ribbed Outfeed Belt, 5" X 4'; 1HP
Sorting Belt, 30” x 31'; 3 HP

2 RUN INFEED TRANSFER, 3' X 15'

ELECTRIC TILT HOIST

3 RUN LANDING DECK, 42'' X 10'

PRODUCTO DOG EAR SAW, 3 SAW

2 RUN DECLINE OUTFEED TRANSFER,
4'6'' X 4'6''

CUSTOM MSR PLANER, 4'' X 4'

PRODUCTO 81 CIRCULAR RIP SAW

PACKAGING LINE

Samuel F7B6 Compression Strapper, Top & Sides; S/N A-1034; Bottom Dunnage Placers, (2) Corner Placers; 20 HP Hydraulic Power Unit; w/ plastic conversion.
Outfeed Rollcase From Stacker To Strapper, 4.5' x 31'; (7) Pipe Rolls, 4" x 52"; (13) RC60 Drives, Hydraulic drive
2 Run Strapper Outfeed Transfer, 18' 2- 81X Chain, S-Drive; UHMW 4 x 4 Tubing; 3HP & 57.68-1 Reducer
4 Roll 6.5" x 96" Jump Roll On Air Bags
2 Run Outfeed Transfer, 3' x 6', S-Drive; 81X Chain; 3 HP gear motor, RC100
2 Run Paint Transfers, 3' x 6'; S-Drive; (1) WR78 Chain & (1) W/ 81X Chain; 3 HP RC100, w/ Vent Hood, 6' x 11' x 1.5'; blower & 30’ Duct
2 Run Paint Outfeed Transfers, 3' x 22'; S-Drive, 81X Chain; 3 HP RC100
Custom Built Paper Wrap Station: 16'9"L x 16'w x 16'H; 8" x 8"; Elevated overhead metal deck; w/ (3) paper roll dispensers & custom paper cutter; 1 Ton O/H Crane w/ rails & Supports
18' 4" - 81X Chain Run W/ UHMW 4x4 Turing 3 Hp Motor & 57.68-1 Gear Reducer.
Paint Line w/ Booth & Overhead Exhaust Fan

SAMUEL 48'' X 60''
PLASTIC STRAPPING SYSTEM

PAINT STATION

OVERHEAD WRAP SYSTEM

OVERHEAD WRAP ROLL HOIST

2 RUN X 100' STRAPPER
OUTFEED TRANSFER, 6 DRIVES

GRACO PAINT PUMP

COMPRESSORS & AIR DRYERS

Compair 60HP Compressor
Hydrovane 30HP Compressor
Hydrovane 25HP Compressor
Compair AP-280 Air Dryer
Compair TW-200 Air Dryer
Xebec 22HD101U Double Air Dryer, 1PH

COMPAIR 60HP COMPRESSOR

HYDROVANE 25 & 30HP
COMPRESSORS

2 OF 3 COMPAIR AIR DRYERS

AIR RECEIVING TANKS

ELECTRICS & CONTROLS

Roederstein ESTAmat PFC12 Power Factor Controller, 450kVAr@480V; Model R7230-450k5s9i0f480V • Allen-Bradley 5 Section MCC, 21 Switches • Allen Bradley 2 Section MCC • Benshaw 200 HP Blower Soft Start • 75HP Soft Start • 75HP Soft Start • 20HP Soft Start & Starter • Line Shaft Trimmer Saw Control • Line Shaft Trimmer Lockout Breaker Panel • Allen Bradley PLC For S500 Waste System • Benshaw Solid State Motor Control • Stacker VFD Lock Box • Stacker Control MCC • VFD Cabinet • (2) Siemens 200amp Switch • (2) Starter Cabinets, 13 + 14 Starters • Allen Bradley Panel View 1000 Controls • Siemens 75KVA Transformer • Siemens 30 - 400 Amp switches • Spare Drives: 75HP/1775/230/460V; 60HP/1775/230/460V; 40HP/1760/230/460V; 7.5HP/1740/230/460V; 5HP/1750/230/460V; Baldor 25HP gear drive; Baldor 50HP drive, 230/460V; Highfield 40:1 reducer; Baldor 3HP w/ Falk 20:1 reducer.

ROEDERSTEIN ESTAmat PFC12
POWER FACTOR CONTROLLER

PLANER CONTACTS & STARTERS

ALLEN BRADLEY PLANER PLC

CONTACTS & STARTERS
FOR PLANER HEADS

BALDOR PLANE BRAKE

(2) WOODS 3HP VFD'S

ALLEN BRADLEY PLC

LUMAB SENSOR CONTROLLER

BENSHAW 200HP SOFT START

SQUARE D 75HP SOFT START

BENSHAW 75HP SOFT START

BENSHAW 40HP SOFT START

RITTAL ENCLOSURE & (2) WOOD
5HP VFD'S

RITTAL ENCLOSURE & (4) 5HP VFD'S

(3) WOODS 3HP VFD'S

REMOTE PLC RACK W. I-O

SYSTEM TM PLC &
STARTER ENCLOSURE

PLC ENCLOSURE

1 OF 3 PLC'S FOR
SYSTEM TM STACKERS

AB PANELVIEW PLUS 400 CONTROL

1 OF 2 WOODS X5 AC DRIVE
75HP VFD'S

SYSTEM TM PLC &
STARTER ENCLOSURE

ALLEN BRADLEY PLC FOR
SORTER STACKER

MOELLER STARTER

ALLEN BRADLEY PLC FOR
STRAPPER INFEED

VACON X 10HP VFD

START-STOP CABINET FOR
STRAPPER OUTFEED

(9) VFD'S

ALLEN BRADLEY PLC FOR C-LINE

START-STOPS FOR TRIMSAW HEADS

TRIM LINE PLC & OMRON
POWER SUPPLY

BENSHAW 125HP SOFT START

OPERATOR CONTROL

ALLEN BRADLEY 5 BANK MCC

SWITCHGEAR & PLC'S

PLC CONSOLE

BOX OF 6 VFD'S, 40, 20 & 7.5HP (2)

COMPLETE PELLET MILL

Sprout-Waldron 510HL Pellet Mill, s/n 1269; 150HP; New die and stiffener ring; Spare die, New roller & roller shells; Rebuilt force feeder • Jacobson Vertical Feed Mixer, vertical auger, bottom discharge to 10’ incline auger to pellet mill; 4’ cyclone • Sprout-Waldron Cooler/Screener, 34” x 48”; s/n 61-1708; w/ internal double rotary screens; w/ top feed from pellet mill • Allen-Bradley PanelView 1000 control • Allen-Bradley 3 section MCC, 10 switches • Allen-Bradley SMC Plus 250HP soft start • Allen-Bradley PLC.

COMPLETE SPROUT-WALDRON
510HL PELLET MILL

GENERAL EQUIPMENT

Mereen Johnson 312-DC Self-Fed Rip Saw; S/N MJ-5918; 50 HP; 3HP Variable Speed Motor
Valley Machine Works Edger, 16" X 4"; S/N 1333-96-03-22; Top & Bottom Arbors p/w50HP 3600 RPM & 20 HP 3600RPM Drives; 5 HP
Universal 7442 Baler, s/n B7.1.4.95, 15HP
Hydraulic Power Units: 10HP – 50HP, Twin 10HP; Many w/ Thermal Transfer Heat Exchangers; More…
Precision Pop Up Saws
Signode Suretyer Auto Strapper
(2) Fromm P235 Battery Powered Strappers
(2) Fromm P356 Air Powered Strappers
(6) Fromm Manual Strappers
Joinpak ES-102A plastic strapper
Joinpak TP-202 strapper
Strapak D-52 strapper
Strapak S-66 strapper
Econolift 4' X 8' Electric Scissor Platform Lift
Electric Scissor Lift, 4' X 5' w/ Rollcase
Econolift 4' X 5’ Platform Scissor Lift
Scissor Lift, 4' X 5', 4,000lb Electric
’97 Mayville 2033RS Aerial work Platform Lift, s/n 08700673; 7’ x 30” platform
2006 Canwood PNR10-260 Wood Bandsaw
Delta Unisaw 10" Tilt Arbour Table Saw, Model 34-457, w/ Unifence
Bostitch Nail Guns • Skilsaw Mitre Saw • Power tools: Approx. (40) Lumber Carts, Lumber wrap stands, Self Dumping Hoppers, Spare motors, Spare blowers, Teck Cable, Blower Pipe, much more…

MEREEN JOHNSON 312-DC RIP SAW

VALLEY 16''X 4'' EDGER, REBUILT

PIC UNIVERSAL 7442 BALER

PRECISION 14M CHOP SAW

1 OF 5 CHOP SAWS

PALLET DE-STACKER SYSTEM

TURNTABLE

20HP HPU

(2) FROMME AIR STRAPPERS

(2) FROMME POWER STRAPPERS

SIGNODE SURE-TYER AUTO STRAPPER

(4) STRAPPERS

SCISSOR LIFTS

ROLLCASE SCISSOR LIFT

MAYVILLE 2033 AERIAL
WORK PLATFORM

FORKLIFT DUMP BIN

PART VIEW OF LUMBER CARTS

1 0F 2 WRAP STATIONS

TWIN 10HP HPU

MAINTENANCE & FAB SHOP

Do-All GPM-200S Milling Machine, s/n 0115167 • Mueser M35R Radial Arm Drill • Piranha P50 8783 IronWorker • Do-All C-916 Metal Cutting Bandsaw • Sirco PA-24 Engine Lathe • Max-O kgs-200 Grinder • Delta 16 ½ Drill Press • Speedy RF-712 Horizontal Bandsaw • HM Machinery SE 2035 Drill Press • Bio-Circle Parts Washer • Milwaukee Magnetic Drill, Bosch Brut Jack Hammer, Hilti Guns, Laser Levels, Drill Doctor, Stinger 10T Hydraulic Power Pack, Grinders, Wrenches, Steel benches w/ Vises, Bolt Bins, Ladders, New Bearings, Pulleys, Hose etc., Welding: Miller Millermatic 251 Welder • Miller Syncrowave 18-SD Welder • Miller Millermatic 250 Welder • Miller Spectrum 701 Plasma Cutter • Miller Bluestar 6000 180 amp welder • Miller TB300/200 AC/DC welder • More...

CHIPPING & DUST COLLECTION

WSM 2822 42” x 26” Hog; S/N 3851197; 125 HP 1800 RPM Motor Direct Coupled; Blower Fan 28"X12"; 125 HP 1800 RPM Motor V-Belt W/ 70 L.F. 12" Blow Pipe
WSM 282 2D 42"X26" Hog ; 100 HP 1800 RPM Motor, Direct Coupled
(3) USMW 20 Unit Bins w/ Cyclones
USMW 30 Unit Bin;
USMW 50 Unit Bin,
Hydraulic Power Unit For Bins,
20HPTarping Station,
All Blower Pipe In Building And Outside
Long Cone 10’ Cyclone/Filter; w/ Blower, 22" X 12"; 20 HP 1800 RPM;
Blower, 60" X 27"; 200 HP 1800 RPM;
10” x 60’ Blower Pipe;
32” x 150’ Blower Pipe, mounted on 6” x 220’ H-Beam & 204’ x 1/4"x 3" angle iron; (4) Concrete Piers-24" Dia. X24"
Elevated Blower, 42" X 28"; 75 HP 1800 RPM; w/ 20” x 160’ dust pipe & supports
Elevated Blower, 42" X 18"; 75 HP 1800 RPM; w/ 20” x 110’ dust pipe & supports
Elevated Blower, 36" x 14" x 40 HP 1800 RPM; 16” x 100’ blower pipe, Blower Stand
Blower, 28" x12" x 40 HP 1800 RPM; 12” x 80’ blower pipe
New Northern 15” x 36” blower
New Shooters 15” x 36” blower

WSM 2822 42'' X 26'' HOG, 125HP

WSM 26'' X 42 HOG, 100HP

1 OF 2 - 28'' X 12'' X 40HP BLOWER

60'' X 27'' 200HP BLOWER

(3) USMW 20 UNIT BINS

USMW 30 & 50 UNIT BINS &
WRAP STATION

10' LONG CONE CYCLONE

INCLINE HOG INFEED BELT, 2' X 45'

INCLINE WASTE CONVEYOR,
18'' X 40'

GROVE 3HP GEAR DRIVE

(2) 36'' BLOWERS

22'' X 12'' X 20HP BLOWER

INSIDE BLOWER PIPE

OUTSIDE BLOWER PIPE

GRINDING

Wright W-150 HD "A" Automatic Top & Face Sharpener
Wright W-150 HD "B" Automatic Top & Face Sharpener; Standard: 4" - 30" Saw Size; Optional: Up To 54"
Wright W-350 HD Auto Dual Side Sharpener; 6” – 36” Auto, Up to 48” manual;
Wright W-150HD Grinder; W/ W-1500 Hollow Point Option
Armstrong No 3-10 Straightener
Acme Circular Saw Sharpener, 104-31
Foley-Unitool 251 Auto Traversing Cutter Head Grinder, S/N 1000101
2008 Petschauer FL600 Carbide Tip Machine
Auto Traversing Cutter Head Grinder
Armstrong 6012 Grinder
Standridge 12" X 12" Granite Surface Table,
Circular Saw Anvils, 18", 14", 10"
Over 250 of 12”-18” Blades, ripping heads, profile ripping heads
Rolling Knife Setting Gauge, 12" Digital Calipers, STM 12" Dial Gage, Dial Height Gage, Grease Gun, Wood Bench & Record No. 5 Vise, Cabinet Of Ripping Blades For Planer, Planer Heads, Ripping Heads.

'08 PETSCHAUER FL600
CARBIDE TIP MACHINE

WRIGHT W-150 "A" TOP
& FACE GRINDER

WRIGHT W-150 "B" TOP
& FACE GRINDER

WRIGHT W-150HD TOP
& FACE GRINDER

WRIGHT W-350 AUTO DUAL SIDE SHARPENER

ROLLING STOCK

2000 Kenworth W900L Conventional Sleeper Highway Tractor; 12k FRT 40K RR T/A; 244” Wheel base; Cummins N14 @ 435; Road Ranger RTLO16913A; Airshift PTO; 72” Aerocab Sleeper; 11R24.5 rubber on Aluminum; 1.6 mil KM; 350k km on inframe rebuild (done @ Greatwest Kenworth, Red Deer, AB); 100,000KM on rebuilt transmission (Gear Centre Red Deer); 50,000KM on new radiator core & air-to-air (Northland Rad Red Deer)
2003 Kenworth T800B Highway Tractor; Day Cab; 14.6K FRT 46K RR T/A; Cat C-15 @ 475HP; Road Ranger 18; Airshift PTO; 11R22.5 on Aluminum;
2003 Western Star 49 Sleeper Highway Tractor; 12K 40K RRk T/A; 244” Wheel base; Detroit Series 60 @ 575HP; Road Ranger 18; Airshift PTO; 11R24.5 rubber on Aluminum; 1.2 million KM;
2006 Peterbilt 379 Highway Tractor; Day Cab; 14.6k FRT 46K RR T/A; Cat C-15 @ 550HP; Road Ranger 18; Airshift PTO; 11R22.5 on Aluminum; 1.2 million KM;

2000 KENWORTH W900L
HIGHWAY TRACTOR

2003 Kenworth T800B Highway Tractor

2003 Western Star 4900

2006 Peterbilt 379

TERMS OF SALE

Payment: Full payment day of sale by wire transfer, cash, Visa, Mastercard or company cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. Full payment by cleared funds must be made before removal of items purchased. Buyer’s Premiums: 12% will be added to all invoices. All items in auction are subject to additions, deletions and prior sale. Equipment removal deadline: Friday, July 8th, 2011. Additional time can be arranged directly with Palliser Lumber management for chip bins, System TM, etc. All items are sold “as is – where is”, with all faults. While quantities and descriptions are believed to be accurate, the auctioneer, owner, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. No warranties whatsoever are made as to condition, merchantability
or fitness for any use of any item. Please take advantage of our preview and inspection period.

Upcoming Auctions

Sales Projects

Tradewest News

Mailing List Keep abreast with Tradewest's auctions, liquidations, and more!Click here

Absentee Bid Form

UNRESERVED REMAN & PALLET AUCTION! - PAST SALE

PALLISER LUMBER SALES LTD.

Palliser Lumber Operating Equipment Demonstration Video (Click Play to start video)

Mailing List
Keep abreast with Tradewest's auctions, liquidations, and more!
Click here

Palliser Lumber Operating Equipment Demonstration Video
(Click Play to start video)