Tradewest Sales : AUCTION : TIMEU FOREST PRODUCTS LTD.

AUCTION DAYS:		WEDNESDAY, MAY 9, 2018 AT 9 AM
		THURSDAY, MAY 10, 2018 AT 9 AM

PREVIEW DAY:		TUES, MAY 8, 2018, 9 AM – 4 PM

PLACE:		Hwy 661, 8km N. of Ft. Assiniboine, AB

Well Maintained & Upgraded Sawmill Machinery & Rolling Stock at Auction Prices

NOTE: Individual Machines & Production Lines Available for Immediate Sale Prior to Auction

NOTE: Entire Sawmill Available with Land & Buildings for Turnkey Package Price

ONLINE BIDDING

AUCTION BROCHURE

VIEW THE FULL 8-PAGE AUCTION BROCHURE

CONTACT DETAILS

CONTACT:		Matt Ardiel
PHONE:		(604) 530-9351
FAX:		(604) 530-0194
EMAIL:		mtardiel@tradewestsales.com

TERMS OF SALE

Special Deposit Terms for This Auction:

On Site and On-line Bidders on the two property parcels and the Hewsaw R200 small log processor and related lots are required to provide a deposit by Wire Transfer or Cashier’s Cheque in the amount of 25% of your total expected spend, including bid value, buyer’s premium and taxes. Deposit must be received at the auction site or into the Tradewest bank account provided by 3pm Monday, May 7th, 2018. Unsuccessful bidders will be refunded within 72 hours of the auction. Please call Ken Ardiel at Tradewest Asset Solutions Inc. for full information and bank instructions. No exceptions will be made to this requirement.

General Terms of Sale:

Payment: Deposit of 25% on award of bid.

Full Payment – Day Of Sale By Cash, Cashier’s cheque, Wire transfer, or Company Cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. No Personal Cheques. Credit Cards accepted to a maximum of $5,000, and a 2% surcharge will apply. Full payment by cleared funds must be made before removal of purchased items. Please review carefully before bidding.

Approved company cheques are to be made payable to:
Tradewest Asset Solutions Inc.

Buyer’s Premiums are as follows:

• On-Site Buyers: 15%
• Bidspotter On-line & Absentee Buyers: 18%

On-line Registration Terms:

• Greater of $2,500 or 25% of your expected spend in the form of Cashier’s Check or Wire Transfer only. 
• Cashier’s Cheques to be made payable to Tradewest Asset Solutions Inc. 
• Charmaine Friesen at cfriesen@tradewestsales.com for Wire Transfer and other Information.

All Items Sold 'As Is' 'Where Is'. All Sales Final. While quantities and descriptions are believed to be accurate, the auctioneers, owners, employees, or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies, verbal or written descriptions. No Warranties whatsoever are made as to condition, merchantability or fitness for use of any item. Please take advantage of the preview and inspection period.

Removal: Small items by Friday, May 11th, 2018. All items to be removed from sale site by 12 noon, Friday, June 15th, 2018.

Bidder agrees to be bound by signature on bidder registration card to terms of sale on card and on cover of the auction catalogue. Additional Terms of Sale may apply. Announcements on sale days take precedence over all other posted terms of sale.

LOT LISTING

Please download the equipment listing or reference it below.

DOWNLOAD LISTING

Lot #	Description	Photo
1	PARCEL 1 – MAIN MILL PROPERTY: 76 ACRES LOCATED IN FORT ASSINIBOINE, ALBERTA, APPROXIMATELY 1.5 HOURS FROM EDMONTON, ABOUT 10 KM’S NORTH ON HWY 33 TOWARDS SWAN HILLS. LEGAL DESCRIPTION: SE ½ 35-62-6-W5M 61028 TWP RD 625, FORT ASSINIBOINE, ALBERTA; 76 ACRES, INCLUDING 2+ ACRES OF PAVED YARD ● NO SOIL CONTAMINATION IN HISTORY OF SITE ● MAIN MILL BUILDING: 22,593 SQ FT ON GROUND LEVEL ● 9,625 SQ FT UPPER LEVEL SAWMILL PORTION ● 12’6” FROM GROUND TO UPPER FLOOR, 11’ FROM UPPER FLOOR TO CEILING ● LEAN-TO WING ON MAIN MILL, 24’ X 80’; SLOPED CEILING, 23’ – 26’H ● 1.5 MILLION BTU BOILER & PUMPS ● (2) LENNOX FURNACES ● HOT WATER TANK ● 150’ WELL (POTABLE WATER) ● SEPTIC TANK, SHARED WITH OFFICE BUILDING ● SORTER BUILDING: 30’ X 180’ SECTION X 28’ TO CEILING ● COLD STORAGE WING OF SORTER BUILDING, 17-1/2’ CONCRETE TO CEILING ● SHOP BUILDING: 3,000 SQ FT WOOD FRAME W/ METAL CLADDING; 17’6” CEILING HEIGHT; (2) SHOP DOORS, 16’H X 14’W & 16’ X 16' ● LOG BUILT OFFICE BUILDING; 2 STORY WITH LOFT, IN FLOOR HEAT; NOTE: SALE OF PARCEL 1 SUBJECT TO A REASONABLE RESERVE AND OWNER APPROVAL. CONTACT KEN ARDIEL AT TRADEWEST FOR FULL INFO. (604) 530-9351 OR KARDIELTRADEWESTSALES.COM ● (SUBJECT TO PRIOR SALE)+B1
2	PARCEL 2 – 173 ACRES CLEARED & FORESTED LAND; LEGAL DESCRIPTION: N.W. ¼ SEC.25 – TWP.63 – RGE.6 – W5M ● ADDRESS: 65063 RGE RD 65, WOODLANDS COUNTY, FT. ASSINIBOINE, AB (NORTH FORK/TIMEU AREA) ● 121 ACRES PRODUCTIVE PASTURE; METAL CLAD WAREHOUSE; REMOVABLE OFFICE BUILDING ● NOTE: SALE OF PARCEL 2 SUBJECT TO A REASONABLE RESERVE AND OWNER APPROVAL. CONTACT KEN ARDIEL AT TRADEWEST FOR FULL INFO. (604) 530-9351 OR KARDIELTRADEWESTSALES.COM ● (SUBJECT TO PRIOR SALE)
2A	SALE PROCEEDS TO MILL BASEMENT FOR START OF EQUIPMENT AUCTION WITH SMALL TOOLS & EQUIPMENT
3	POWERFIST 7-1/4" PORTABLE METAL CUTTING SAW
4	MAKITA JIG SAW
5	ASSORTED LUBE DISPENSERS
6	BOX OF ASSORTED SCREWDRIVERS
7	BOX OF ASSORTED FILES
8	MILWAUKEE HEAT GUN
9	LOT OF FLASHLIGHTS
10	PROCOR SCREWDRIVER SET & CASE
10A	(2) PROCOR HD PUNCH & CHISEL SETS
11	PIPE BENDER
11A	(3) SETS OF HD, GENERAL & MAINTENANCE FILES
12	LOT OF NUT DRIVER & WESTWARD SCREWDRIVER SETS
13	LOT OF NUT DRIVER SETS
14	(2) FLUKE VOLT METERS
15	LOT OF SANDING BELTS & GRINDING WHEELS
16	ASSORTED O-RING, SNAP RING SETS, WOODRUFF KEY SETS
17	HUSQVARNA GAS POWERED CHAIN SAW
18	STIHL MSE220 ELECTRIC CHAIN SAW
19	STIHL MSE220 ELECTRIC CHAIN SAW
20	STIHL MSE220 ELECTRIC CHAIN SAW
21	(2) DEWALT ANGLE GRINDERS
22	(2) DEWALT ANGLE GRINDERS
23	DEWALT ANGLE GRINDER
24	DEWALT DW840 ANGLE GRINDER
25	WALTER GRINDING WHEELS & BRUSHES
26	(2) DEWALT DC720 18V CORDLESS DRILLS W/ CHARGERS
27	MILWAUKEE 18V CORDLESS DRILL W/ CHARGER
28	MAKITA 1/2" (13MM) ELECTRIC DRILL
29	DEWALT DW505 1/2" HAMMER DRILL
30	MILWAUKEE 6230 PORTABLE HORIZONTAL METAL CUTTING BANDSAW
31	(2) WESTWARD MULTI-SPLINE EXTRACTOR SETS
32	PROTO SNAP RING PLIER KIT
33	PROTO SNAP RING PLIER KIT
34	(2) PAULIN PAPCO FASTENER, COTTER & SPRING PIN KITS
35	BOX OF 3/4" HD SOCKETS (FROM TRUCK SHOP)
36	BOX OF HD SOCKETS (FROM TRUCK SHOP)
37	LOT OF WELLER SOLDERING SETS
38	RIDGID 12R THREADER & 1-1/4" DIE
39	RIDGID 00-R THREADER & 3/4" DIE
40	(4) RIDGID THREADING DIES
41	WESTWARD 495 FLARING TOOL KIT
42	WESTWARD 495 FLARING TOOL KIT
43	WESTWARD 10 TON HYDRAULIC PULLER MASTER KIT
44	RETRACTABLE LIFELINE, FALL GEAR & HARNESSES
45	HD PULLER SET W/ CASE
46	LOT OF WELDING ROD & WIRE
47	BOX OF ASSORTED CLAMPS, ETC. IN TOOL BOX
48	GROTE ELECTRICAL TERMINAL & TOOL KIT
49	PROTO EASY OUT SCREW & PIPE EXTRACTOR SET
50	PROTO EASY OUT SCREW & PIPE EXTRACTOR SET
51	PROTO EASY OUT SCREW & PIPE EXTRACTOR SET - NOTE TWO BOXES MARKED LOT 51
52	SNAP-ON SCREW EXTRACTOR SET
53	SNAP-ON RTD42 RE-THREADING SET
54	(2) MAKITA POWER BIT SETS
55	WESTWARD 110 PCE TAP & DIE SET
56	HOLE PUNCH & HOLLOW PUNCH SET
57	(2) 3/8" STANDARD & METRIC SOCKET SETS
58	(2) 3/8" STANDARD & METRIC SOCKET SETS
59	(2) 1/2" STANDARD & METRIC SOCKET SETS
60	(2) 1/2" STANDARD & METRIC SOCKET SETS
61	(2) 1/2" STANDARD SOCKET SETS
62	MITUTOYO DIAL INDICATOR & MAG BASE
63	MARSON POP RIVETOR
64	(2) SETS OF DIGITAL CALIPERS
65	(3) SETS OF DIGITAL CALIPERS
66	3 DRAWER METAL DRILL BIT CABINET & BITS
67	(2) WESTWARD 12" BESSEY CLAMPS
68	LOT OF CRESCENT WRENCHES
69	BOX OF DRILL BITS & TOOLS
70	LOT OF ASSORTED PRY BARS, BOLT CUTTERS, CHAIN PULLER, ETC.
71	PORTA-POWER HYDRAULIC JACK & CASE (AUTO BODY KIT)
72	PORTA-POWER HYDRAULIC JACK & CASE (AUTO BODY KIT)
73	BOX OF ASSORTED TAPS & DIES
74	LOT OF OXY-ACETYLENE HOSES, GAUGES & TIPS
75	(2) BUCKETS OF SOLVENT
76	TOOL BOX FULL OF HAMMERS, SLIDE HAMMER & MALLETS
77	PULLZALL 1,000LB ELECTRIC CABLE HOIST, 110V
78	PULLZALL 1,000LB ELECTRIC CABLE HOIST, 110V
79	(2) 24" & 36" PIPE WRENCHES
80	(2) 18" & 24" PIPE WRENCHES
81	24" TORQUE WRENCH
82	WESTERN 12" TORQUE WRENCH
83	ASSORTED RATCHETS & SOCKETS
84	(4) 18" RATCHET DRIVERS
85	(2) BOXES OF SOCKETS
86	(4) HACK SAWS
87	BOX OF ASSORTED SOCKETS SETS
88	(3) BOXES OF 1/2" DRIVE SOCKETS
89	RIDGID FLARING TOOL
90	POWERFIST 10/2 AMP CHARGER
91	BATTERY AMP METER
92	(2) BOXES OF ALLEN WRENCHES & DRILL BITS
93	(4) CHICAGO PNEUMATIC AIR DRIVERS
94	(3) CHICAGO PNEUMATIC AIR DRIVERS
95	(3) AIR IMPACT DRIVERS
96	INGERSOLL-RAND IMPACTOOL 3/4" AIR DRIVER
97	CHICAGO PNEUMATIC CP772H 3/4" AIR DRIVER
98	INGERSOLL-RAND 3/4" AIR DRIVER
99	CHICAGO PNEUMATIC CP772H 3/4" AIR DRIVER
100	WESTWARD 3/4" AIR DRIVER
101	BOX OF AIR RATCHETS, CHISELS, ETC.
102	CHICAGO PNEUMATIC AIR CHISEL SET
103	LOT OF (5) ALLEN WRENCH SETS
104	LOT OF (3) BOXES OF ALLEN WRENCHES
105	DEWALT DW311 RECIPROCATING SAW
106	DEWALT DW303 RECIPROCATING SAW
107	DEWALT DW887 1-1/2" DIE GRINDER
108	PNEUMATIC TOOL KIT, INCL. RATCHET, GRINDER, MORE..
109	RIDGID MICRO EXPLORER DIGITAL INSPECTION CAMERA
110	POWERFIST CORDLESS 18V GREASE GUN, W/ CASE
111	POWERFIST CORDLESS 18V GREASE GUN
112	CHAIN BREAKER KIT
113	CHAIN SAW RIVET SPINNER
114	LOT OF GREASE GUNS
115	LOT OF GREASE GUNS
116	(2) 20 TON BOTTLE JACKS
117	(4) ASSORTED BOTTLE JACKS
118	LOT OF 12+ HD PRY BARS
119	LOT OF AIR TOOL OIL, WD40, ETC.
120	CASE OF DELO LUBE TUBES
121	LOT OF OPERATOR MATTS
122	SPOOLS OF ASSORTED ROPE
123	DEWALT METAL FRICTION CUT-OFF SAW
124	BOX OF SHACKLES, ETC.
125	HEATER & WORK LIGHTS
126	BOX OF TOOLS, LASER TEMP SENSOR, ETC.
126A	LOT OF SLEDGE HAMMERS
127	LOT OF PICKS
128	(3) GRAPPLE HOOKS
129	PARTS WASHER
130	2 IN 1 6.5HP WET DRY SHOP VAC
131	LOT OF HD WRENCHES
132	LOT OF HD WRENCHES
133	LOT OF HD WRENCHES
134	LOT OF HD WRENCHES
135	LOT OF HD WRENCHES
136	LOT OF HD WRENCHES
137	LOT OF HD WRENCHES
138	LOT OF HD WRENCHES
139	LOT OF HD WRENCHES
140	LOT OF HD WRENCHES
141	LOT OF HD WRENCHES
142	LOT OF HD WRENCHES
143	LOT OF HD WRENCHES
144	LOT OF HD WRENCHES
145	LOT OF HD WRENCHES
146	POWER FIST 14 PCE WRENCH SET
147	POWER FIST 14 PCE WRENCH SET
148	LARGE LOT OF HD WRENCHES
149	PLATE CLAMP
150	(4) MAGNET CORNERS
151	(4) WELDING BLANKETS
152	HAND TRUCK
153	OPEN
154	ROLLING TOOL CHEST
155	ROLLING TOOL CHEST
156	WESTWARD ROLLING TOOL CHEST
157	(2) 3/4 TON COME-A-LONGS
158	(2) 1 TON COME-A-LONGS
159	3/4 TON & 1 TON COME-A-LONGS
160	3/4 TON & 1 TON COME-A-LONGS
161	1-1/2 TON COME-A-LONG & 1 TON CHAIN HOIST
162	1-1/2 TON COME-A-LONG & 1 TON CHAIN HOIST
163	1-1/2 & 3/4 TON COME-A-LONGS
164	(2) CHAIN PULLERS
165	(2) SETS CHAINS W/ HOOKS
166	(2) SETS CHAINS W/ HOOKS
167	(2) SETS CHAINS W/ HOOKS
168	(2) SETS CHAINS W/ HOOKS
169	(2) SETS CHAINS W/ HOOKS
170	(2) SETS CHAINS W/ HOOKS
171	(3) SETS CHAINS W/ HOOKS
172	(5) PACKPACK FIRE WATER TANKS & SPRAY NOZZLES
173	WESTWARD 5,500LB PALLET JACK
174	POWER FIST 50' AIR HOSE REEL
175	LOT OF EXIT SIGNS
176	DEWALT CUT-OFF SAW
177	DELTA 9124 DRILL PRESS W/ VISE
178	OTC 25 TON HYDRAULIC SHOP PRESS
179	MILWAUKEE 4270-20 MAGNETIC DRILL, W/ CASE & SPARE CUTTERS
180	NEW PLASTIC HOSE REEL
181	(2) NEW SQUARE D 30 AMP SWITCHES
182	SQUARE D 30 AMP SWITCH & STARTER BOX
183	LOT OF POWER CORDS
184	LOT OF HEATERS
185	(2) TIGER TORCHES W/ PROPANE TANK
185A	(2) TIGER TORCHES W/ PROPANE TANK
186	800 WATT GAS POWERED GENERATOR, MODEL BT950; 120V
187	HYDRAULIC ACCUMULATOR NITROGEN FILL KIT
188	FROMM 329 BATTERY POWERED PLASTIC STRAPPER; 18V; W/ LITHIUM BATTERY & CASE
189	FROMM P325 BATTERY POWERED PLASTIC STRAPPER; 14V; W/ LITHIUM BATTERY
190	FROMM P325 BATTERY POWERED PLASTIC STRAPPER; 14V; W/ LITHIUM BATTERY
190A	FROMME P300 ELECTRIC STRAPPER, 115/120V 1PH
191	NEW IN BOX PET MODEL 19 PNEUMATIC PLASTIC STRAPPER; 13-=19MM;
192	PET MODEL 19 PNEUMATIC PLASTIC STRAPPER
193	FROMM A337 HAND STRAPPER
194	FROMM A337 HAND STRAPPER
195	LOT OF BROOMS & SHOVELS, ETC.
196	LOT OF BROOMS & SHOVELS, ETC.
197	LOT OF BROOMS & SHOVELS, ETC.
198	LOT OF BROOMS & SHOVELS, ETC.
199	LOT OF BROOMS & SHOVELS, ETC.
199A	OUTSIDE STEEL STORAGE UNIT W/ LIFTING HOOK (BETWEEN MILL & OFFICE BUILDINGS)
	SALE PROCEEDS TO SLASHER/LOG SORT LINE
199C	NOTE: LOTS 200 - 212 ARE OFFERED INDIVIDUALLY, SUBJECT TO A COMBINED BID AS LOT 213.
200	60" SLASHER SAW ,75HP
201	5 STRAND HD LOG INFEED DECK; 20' X 35'; SPLIT SHAFT P/W 7.5HP 230/460V W RADICON REDUCER & 7.5HP DRIVE W/ RADICON REDUCER; 230/460V
202	56' LOG CHAIN INFEED TROUGH
203	OUTFEED WASTE CONVEYOR, 12" X 18'; SM-CYCLO 7.5HP DRIVE
204	180' LOG SORT SYSTEM, W/ SLASHER SAW OUTFEED CHAIN, W/ (6) TRIPLE HYDRAULIC LOG PUSH-OFFS & LOG SLIDES
205	TWIN 25HP HYDRAULIC POWER UNIT
206	OPERATOR CONSOLE & CHAIR
207	SLASHER SAW SETWORKS & PLC
208	OKANAGAN AUTOMATION CONTROL SYSTEM, MODICON TSX MICRO, ETC.
209	FPE 600 AMP 600V SWITCH
210	HYDRAULIC POWER UNIT SWITCH
211	REMAINING ELECTRICS IN OPERATOR BOOTH, (1) 60 AMP, (2) 30 AMP SWITCHES; MALONY 5KVA TRANSFORMER, 480-120/240V; SPLITTER BOX
212	SLASHER SAW OPERATOR BOOTH; POWER, LIGHTS, HEATER, A/C
213	COMBINED BID FOR LOTS 200 THROUGH 212 INCLUSIVE
214	SPARE SLASHER SAW ARM, ARBOR ASSEMBLY, W/ 50HP 1180 RPM 575V ARBOR DRIVE (BOUGHT FOR FUTURE 3 SAW SLASHER DECK PROJECT)
215	SPARE SLASHER SAW ARM, ARBOR ASSEMBLY, W/ 50HP 1180 RPM 575V ARBOR DRIVE (BOUGHT FOR FUTURE 3 SAW SLASHER DECK PROJECT)
216	OPEN
217	OPEN
218	OPEN
219	SALE PROCEEDS TO DEBARKER AREA
220	CAMBIO 30" SINGLE RING DEBARKER
221	CAMBIO 18" RING DEBARKER, MODEL CA US; S/N 68748
222	6 STRAND LOG INFEED UNSCRAMBLER, 19' X 13'H
223	SM-CYCLO DRIVE
224	LOG STEP FEED, 19'W X 8'H; W/ DRIVE
225	BOX CHAIN LOG INFEED, 9" X 48'
226	LOG UNCSCRAMBLER, 19'3" X 13'6"W
226A	SM-CYCLO 10HP DRIVE
227	4 STRAND LOG INFEED DECK, 17' X 45'L
228	SM-CYCLO H3175 7.5HP DRIVE, 29:1 RATIO; 575V
229	LARGE LOG INFEED CHAIN, 9" X 42'; W/ 5HP 1745RPM 575V DRIVE
230	SQUARE D 30 AMP SWITCH
231	DEBARKER AREA ELECTRICS: (1) 200 AMP; (1) 100 AMP, (5) 30 AMP SWITCHES
232	METAL OPERATOR BOOTH, CONTROLS, LOREX 1080P SECURITY MONITORS & RECORDER
233	UNINSTALLED CAMBIO 18" DEBARKER INFEED & OUTFEED ROLLS
234	UNINSTALLED STEEL OPERATOR BOOTH, 8' X 10'
235	LINDEN DOUBLE ACTION STEP FEEDER; 12'H X 18'W; SM-CYCLO 10HP DRIVE; UNINSTALLED
236	12' TILT HOIST W/ ROLLCASE; 5' PACKAGE
237	TILT HOIST PACKAGE ROLLS
238	HAZELDINE J-92 NOTCHER W/ UNSCRAMBLER
239	HYDRAULIC 10' PORTABLE PACKAGE SQUEEZE, W/ LIFTING HOOKS
239A	SALE PROCEEDS TO HOG SYSTEM
240	13" X 45' BOX CHAIN WASTE INFEED CONVEYOR
241	NICHOLSON STRAIGHT KNIFE CHIPPER, 26 X 6 SCH CH; S/N 6746; 75HP 575V 1775 RPM
242	PEERLESS 24 UNIT CHIP BIN, CLAMSHELL;
243	INCLINE BOX CHAIN TO BIN; 14" X 116', W/ DRIVE
244	5HP HYDRAULIC POWER UNIT;
245	OPEN
246	SALE PROCEEDS TO LOG INFEED YARD AREA
247	RAWLINGS P9Z HOG, COMPLETELY REBUILT IN 2017; NEW WEAR PLATES ON ANVIL, BUSHINGS, SCREEN, MAIN HINGE PINS REBORED; NEW CURRENT HAMMERS, W/ REPLACEABLE INSERT CUTTERS; FACTORY REBUILT 250HP 600V DRIVE; HYDRAULIC CLAM OPENING;
248	NEW UNINSTALLED 2011 OPTIMIL EDEM 30’ VIBRATING CONVEYOR, W/ MAGNETIC SECTION, DRIVE; S/N EJ-9692
249	CAE 25" X 32' CHIPPER/HOG INFEED CONVEYOR; CHEVRON BELT; W/ FIBERGLASS MAGNET SECTION; 5HP DRIVE & BROWNING GEAR DRIVE;
250	INCLINE BOX CHAIN CONVEYOR, 20" X 40'' W/ SM-CYCLO CHH-4195Y DRIVE & 5HP MOTOR, 575V 1745 RPM 184T FRAME
251	BELT CONVEYOR TROUGH, 18" X 20', W/ SM-CYCLO M-3160 DRIVE
252	TRIPLE DECK CHIP SCREEN, 6' X 15'
253	DUST CYCLONE IN FIELD
254	DUST CYCLONE IN FIELD
254A	SALE PROCEEDS BACK TO DEBARKER OUTFEED DECK
255	OUTFEED ANTI-VIBRATION TUBE, 34" X 124"; SAND FILLED HOLLOW STEEL
256	SM-CYCLO H3170 7.5HP DRIVE; 575V
257	POWER FIST AIR HOSE REEL
258	OUTFEED ANTI-VIBRATION TUBE, 23" X 129"L; SAND FILLED HOLLOW STEEL
259	6 STRAND LOG DECK, 18'6" X 18'
259A	SM-CYCLO 43170 DRIVE;
260	6 STRAND LOG UNSCRAMBLER, 18'6" X 11'6"
261	(3) SQUARE D 30 AMP SWITCHES
262	OPEN
263	ALL CATWALK, STAIRS & RAILLING IN DEBARKER AREA
264	OPEN
265	1996 HEWSAW R200 SMALL LOG PROCESSOR, UPGRADED HEADS TO DK SPEC 3 SPIRAL HEAD W/ NO SURFACING SAWS; COMPLETE HYDRAULICS, PLC, VALU-SCAN SCANNER (LIGHT CURTAIN); (5) DRIVES: (2) UPPER VERT. – 150HP 3,500RPM; (2) HOR 125HP 3,500RPM; 100HP BOTTOM DRIVE; PROGRAMMING UPDATED IN 2000'S; ALL SAW DRIVES 3,500RPM; 3" - 13" LOG CAPACITY; PAID ,300,000 NEW; HEWSAW BANANA INFEED, 16" X 21'
266	LOG INFEED BELT, 16" X 38'3"; W/ DRIVE
267	24' HEWSAW INFEED, W/ (3) HYDRAULIC KICKERS; SM-CYCLO 7.5HP;
268	4 STRAND CHAIN TRANSFER, 11' X 32'; H78B CHAIN
269	SM-CYCLO 5HP DRIVE
270	4 STRAND CHAIN TRANSFER, 12'L X 14'6"W; W/ DRIVE (CROSS TRANSFER FROM SMALL LOG INFEED TO LARGE LOG EDLF INFEED)
270A	SALE PROCEEDS TO MCDONOUGH CANT EDGER INFEED BELTS
271	BELT CONVEYOR, 30" X 21'6"; W/ DRIVE
272	BELT CONVEYOR, 30" X 74'; 5HP DRIVE
273	WHIRLY BIRD ROTATING LOG KICKER, 18''L, W/ (3) 6' ARMS, 3HP 575V MOTOR & RENORD REDUCER
274	4 STRAND TRANSFER DECK, 11'3" X 13'; W/ 5HP MOTOR & GORDON RUSSELL 28.27:1 REDUCER
275	MCDONOUGH END DOGGER LOG FEED (EDLF) CANT EDGER; 28" DIAMETER, 2 CUT SYSTEM; S/N ED 115; (2) 100HP CHIPPING HEADS; (4) 75HP SAW DRIVES (LEFT & RIGHT CANT SAWS; LEFT & RIGHT SLABBER SAWS; 1750RPM 575V; PLC, HYDRAULICS; TOP RAIL W/ CUSTOM 4" LIFT, INCREASING CAPACITY TO 28" FROM NORMAL 24"; 22' SPLINED INFEED POSITIONING ROLLS; AUTO LUBE SYSTEM; BOUGHT IN 2001;
276	YELLOW METAL STORAGE CABINET
277	5 STRAND TRANSFER DECK, 13W' X 25'L; W/ (5) 10" X 64" EVEN ENDING ROLLS;
278	4 STRAND INCLINE TRANSFER, 16' X 10'9"; W/ (4) JUMP CHAINS
279	SM-CYCLO 5HP DRIVE;
280	OPEN
281	ALLEN-BRADLEY 5 SECTION MCC; BUL2100; 1200 AMP HOR; 300 AMP VERT; 14 SWITCHES
282	POWER FIST 880LB ELECTRIC HOIST & JIB
283	OPEN
284	OPEN
285	CARDINAL 2 POCKET SHIFTING SAW BOARD EDGER; 3" X 30"; 40HP; (1) STATIONARY POCKET, (1) SHIFTING POCKET; S/N 696-B; 23MM COLLARS, 2" COLLARS; SPLINTER BARS;
286	4 STRAND WASTE TRANSFER, 11'4" X 13'5"; H78B CHAIN; W/ 36" X 13.5' BELT CONVEYOR; W/ DRIVE
287	AIR HOSE REEL
288	GRATED SLANT OUTFEED BOARD SLIDE FROM CARDINGAL EDGER
289	OPEN
290	NEWNES MCGEHEE 6” CURVE SAW EDGER; INSTALLED IN 2014; JOB #7179; DRIVE PLUS SPARE; ORIGINAL 200HP CHIPPING DRIVES REPLACED W/ 75HP; (200HP DRIVES IN ON-SITE STORAGE); VALUED AT ,000 PURCHASE; SET FOR STATIONARY; RUNNING 100 PLATE & 160 KERF (OR THINNER); ALL PIECES ON-SITE FOR CURVE SAW; VARIABLE SPEED;
291	NEW 2017 TS MFG. INFEED ROLL SYSTEM; W/ PIN POSITIONER; 7' X 12'6"; (4) CROSS CHAINS; (4) 31" ROLLS; LASER GUIDES; PINCH POINT;
292	5 STRAND LOWER TRANSFER DECK TO TS MFG CURVE SAW EDGER INFEED, 12'W X 22'6"L, W/ DRIVE (EXCL. COMMON SHAFT W/ TS INCLINE FEED)
293	OPERATOR CONTROL BOOTH, 6' X 8', W/ POWER, HEATER, A/C
294	(3) SQUARE D SWITCHES, (2) 60 AMP, (1) 30 AMP
295	BELT CONVEYOR TO TRIM INFEED LANDING DECK, 12" X 68'5"; W/ 7.5HP MOTOR & REDUCER
296	5 STRAND LANDING DECK, 15' X 35'-6"; H78B CHAIN; W/ 5HP DRIVE
297	NEW SECONDARY UNSCRAMBLER INFEED TO TRIM LINE (OUTSIDE)
298	BELT CONVEYOR, 14" X 24'; W/ 5HP DRIVE
299	(2) SQUARE D 60 AMP SWITCHES;
300	DOUBLE END PRECISION TRIMMER; 6 STRAND LUGGED TRIM TABLE TRANSFER; 16' X 25'L; (6) 48" & (1) 72" EVEN ENDING ROLLS; 3500 RPM ARBOR MOTORS; W/ 7 STRAND INFEED LANDING TABLE, 44"L X 14'W;
301	7 STRAND BAR TYPE UNSCRAMBLER, 15'W X 4'2"H;
302	SAMSUNG 30" FLAT SCREEN DISPLAY
303	CONVEX MIRROR & RED LIGHT
304	POWER FIST AIR HOSE REEL
305	(4) SQUARE D 30 AMP SWITCHES
306	OPEN
307	OPEN
308	OPEN
309	SALE PROCEEDS TO NEWNES LUMBER SORTER
310	NEWNES 25 BIN 16' J-BAR LUMBER SORTER, W/ PLC; WINTALLY SYSTEM, UPGRADED BY WYOMING TECH, AND MAINTAINED BY OKANAGAN AUTOMATION;
311	OKANAGAN AUTOMATION LUMINESCENT MARKER GRADE SCAN SYSTEM; RUNS EITHER THICKNESS SHOE ON TEMPOSONICS OR LASER EYES FOR ENCODER;
312	4 STRAND SORTER TRANSFER, COMPRISED OF (3) SECTIONS, 12' X 96' TOTAL LENGTH
313	7.5HP MOTOR, W/ PLANETGEAR 3.78:1 REDUCER;
314	SM-CYCLO H88Y 43:1 DRIVE
315	5HP MOTOR
316	POWER FIST 50' HOSE REEL
317	OPEN
318	OPEN
319	OPEN
320	NEWNES 16' X 5' LUMBER STACKER; 4 ARM; HYDRAULICS, DRIVES, PLC; CONTROLS ARE DEVICE MET; ALL ELECTRIC; HYDRAULIC UNIT FOR STICK PLACING & AIR PACKAGE FOR DOGS; BOXING FORKS ON-SITE, REMOVED THEM FOR HEADROOM); 16' X 21' 5 STRAND TOP INFEED; 90" SIDE FENCE;
321	4 STRAND INCLINE TRANSFER, 11.5' X 15'
322	10HP MOTOR & RADICON REDUCER
323	5 DOUBLE STRAND UNSCRAMBLER, 18'W X 9'8"H; FLYTED CHAIN
324	CUTLER-HAMMER 60 AMP SWITCH; (2) SQUARE D 30 AMP SWITCHES
324A	ORIENT 24" WALL FAN
325	2 STRAND STICK INFEED TRANSFER, 46" X 45'L; W/ DRIVE;
326	4 STRAND PACKAGE OUTFEED TRANSFER, 11.5' X 28'L; W/ PACKAGE MOVE ARMS; SM-CYCLO 7.5HP;
327	DEL SCHNEIDER 20HP HYDRAULIC POWER UNIT
328	STRAPPING CART & PLASTIC STRAPPING COILS
329	WEATHER-PROOF CONTROLS HOUSING, 3' X 4' X 6'H; LOCKING LATCH
330	OPEN
331	OPEN
332	OPEN
333	OPEN
334	OPEN
335	ALLEN-BRADLEY BUL2100 4 SECTION MCC; (18) SWITCHES (SORTER)
336	SQUARE D 30KVA TRANSFORMER, 600V - 208/120V
337	MARCUS 45 KVA TRANSFORMER, 600-480V 3PH
338	GREE AIR CONDITIONER IN SORTER PLC ROOM
338A	BOXES OF PLC BOARDS & MODULES
339	SALE PROCEEDS TO MILL BASEMENT
340	TRIM BLOCK WASTE CONVEYOR, 12" X 26'; 5HP MOTOR
341	MAIN WASTE CONVEYOR, LONG LINK FLYTED CHAIN; 16" X 210'L; W/ 10HP 575V DRIVE & BROOK HANSEN REDUCER
342	SQUARE D SWITCHES, 100 & 30 AMP
343	ROLLER TROUGH WASTE BELT CONVEYOR, 30" X 235'L; W/ SM-CYCLO 20HP DRIVE; CORROGATED HALF ROUND COVER ON OUTSIDE PORTION
344	WASTE CONVEYOR, 12" X 26' BOX CHAIN FROM CURVE SAW EDGER, W/ 5HP MOTOR & REXNORD REDUCER, 575V
345	BOX CHAIN WASTE CONVEYOR, 10" X 45' (FROM MCDONOUGH CANTER); W/ SM-CYCLO 7.5HP DRIVE
346	BOX CHAIN WASTE CONVEYOR, 10" X 42'; 7.5HP MOTOR & RADICON REDUCER;
347	OPEN
348	OPEN
349	OPEN
350	CAE NEWNES 60HP HYDRAULIC POWER UNIT, 460V; W/ (2) SAS & AMERICAN INDUSTRIAL HEAT EXCHANGERS
351	CAE MCGEHEE LUBE SYSTEM W/ RESERVOIR & (2) GRACO QUIET FIREBALL PUMPS
352	CAE MCGEHEE LUBE SYSTEM W/ RESERVOIR & GRACO QUIET FIREBALL PUMP
353	AUXILIARY AIR TANK, 7' X 30" DIAMETER, 200 PSI
354	OPEN
355	OPEN
356	OPEN
357	OPEN
358	OPEN
359	SKATE ROLLS & SLIDES
360	REX 225KVA TRANSFORMER, 600-480V
361	INSULATED METAL BUILDING, 105" X 94", FAN, LIGHTING, POWER
362	CYBER POWER 425VA SURGE PROTECTOR
363	50HP HYDRAULIC POWER UNIT, 5HP CIRCULATION PUMP; 575V
364	30 & 60 AMP SWITCHES & RESET FOR HPU
365	LOT OF PIKES
366	OPEN
367	OPEN
368	OPEN
369	SALE PROCEEDS OUTSIDE TO CHIPPER AREA
370	CHIPPER INFEED BELT CONVEYOR, 18" X 90';
371	TECTRONIX METAL SHARK METAL DETECTOR FIBERGLASS TROUGH SECTION & CONTROL, MODEL STNF 1919-10-24
372	BLACK CLAWSON 6" SLANT DISC CHIPPER; 250HP 600V DRIVE; W/ TECTRONIX SHARK METAL DETECTOR SECTION ON INFEED BELT, W/ CONTROL;
373	INCLINE BOX CHAIN CONVEYOR TO SCREEN, 16" X 36'; MOTOR & REDUCER
374	BM&M 8' X 16' CHIP SCREEN; MODEL 8 X 16 ID; S/N 8616
375	INCLINE CHEVRON FINES RETURN BELT CONVEYOR FROM SCREEN; 12" X 51';
376	SQUARE D 400 AMP 600V SWITCH& 30 AMP SWITCH
377	PEERLESS 30 UNIT CHIP BIN
378	PEERLESS 20 UNIT CHIP BIN
379	PEERLESS 20 UNIT SAWDUST BIN
379A	NOTE: LOTS 380 & 381 WILL BE OFFERED FOR BID INDIVIDUALLY, SUBJECT TO A COMPBINED BID AS LOT 381A
380	INCLINE CHEVRON BELT CONVEYOR TO BINS; 36" X 160' ROLLER CONVEYOR; FULL LENGTH CATWALK & STAIRS; W/ SM-CYCLO 15HP DRIVE
381	INCLINE CONVEYOR TO BINS; 12" X 200' BOX CHAIN; FULL LENGTH CATWAL & STAIRS
381A	COMBINED LOTS OF 380 & 381 INCLUDING SUPPORT STANDS, ETC.; IF NO BID IS RECEIVED FOR THE COMBINED LOTS, THEN THE SUPPORT STRUCTURES WILL BE INCLUDED WITH THE HIGHER OF THE TWO SUCCESSFUL BIDS ON LOTS 380 & 391.
382	HYDRAULIC POWER UNIT FOR BINS
383	CROSS BIN CONVEYOR BELT, 12" X 30'; W/ SM-CYCLO 5HP DRIVE
384	OPEN
385	LOAD TARPING STATION BESIDE IBINS
386	OPEN
387	OPEN
388	OPEN
389	OPEN
390	OPEN
391	OPEN
392	OPEN
393	OPEN
394	OPEN
395	OPEN
396	OPEN
397	OPEN
398	OPEN
399	SALE PROCEEDS TO ROLLING STOCK IN NORTH YARD AREA
400	CAT 140G GRADER, S/N 72V15432; 14,564 HRS; W/ WBM 12' WING BLADE; PERKINS 6 CYLINDER ENGINE; 157-165 BHP; 560 HOURS; PUMP CONTROLS
401	2007 JOHN DEERE 644J WHEEL LOADER; S/N DW644JX600621; EROPS; W/ BUCKET; 6.8L 168HP; TIRES 50%; NEW REBUILT ENGINE & TRANSMISSION W/ 4,000 HRS; FRAME HOURS - 31,000; 3RD VALVE; 3RDVALVE
402	CAT 966D WHEEL LOADER; S/N 99Y02346; EROPS; W/ WELDCOBEALES 9' BUCKET; REBUILT TRANSMISSION W/ 100 HRS; NEW PINS, BUSHINGS, ETC.; 51,968 FRAME HOURS; TIRE SIZE: 25.6.25; TIRES 50%; 3RD VALVE
403	CAT IT18 WHEEL TOOL CARRIER; S/N 6ZF00562; EROPS; W/ QUICK ATTACH BUCKET; SHORT BLOCK OVERHAULED IN 2016; REBUILT BY FINNING; 6,184 ENGINE HRS; 50,309 FRAME HRS; TIRE COND. 70%; 3RD VALVE
404	CAT 930 WHEEL LOADER; S/N 41K2810; EROPS; 6,184 HRS; PIN-ON BUCKET; NEW BRAKES; RARELY USED (STANDBY UNIT); W/ ELECTRIC ACTUATED THIRD VALVE; (NOTE: SOLD ON THE BASIS THAT IT WILL BE RETAINED FOR A PERIOD OF 3 WEEKS FOR ASSISTANCE WITH REMOVAL PROCESS BY QUALIFIED OPERATORS)
404A	QUICK ATTACH ASSEMBLY FOR CAT 930 AND IT18
405	CAT 950F 26,000LB MAST FORKLIFT; S/N 5SK00490; NEW DISPLAY PANEL; TIRE SIZE F-235R25; TIRE COND. 70%; TIRE SIZE R2353 25; TIRES 80%; 3RD VALVE; 1,937 HRS SHOWING;
406	CAT 950C WHEEL LOADER; S/N 31K1951; FORKLIFT MAST W/ FORKS; ENGINE OVERHAULED IN FALL 2016, W/ 390 HRS; TIRES 80%
407	2013 JOHN DEERE 318D SKID STEER; S/N IT0318DAADG238766; W/ 6' BUCKET; IN-CAB ELECTRIC QUICK ATTACH CONTROLS; TIRES 80% REAR, 40% FRONT; 3,909 HRS; (NOTE: SOLD ON THE BASIS THAT IT WILL BE RETAINED UNTIL FRIDAY, MAY 18TH, 2018 FOR ASSISTANCE WITH REMOVAL PROCESS BY QUALIFIED OPERATORS)
408	’97 CASE 95XT SKID STEER;
409	2007 FORD F-550 DIESEL WELDING TRUCK; VIN #1FDAF57P37A2558; POWERSTROKE TURBO DIESEL; W/ MILLER BOBCAT 225 GAS WELDER/11,000 WATT GENERATOR;+B839 COMPRESSOR & DECK CRANE; SIDE CABINETS;
410	2004 GMC 2500 4 DOOR CREW CAB PICKUP TRUCK; VIN #1GTGK23U04F260629; LEATHER, AUTO;
411	2005 KENWORTH 849 COASTAL LOG TRUCK & TRAILER; VIN #86892; CAT 3406 ENGINE; CLARK90,000LB REAR PLANETARY; W/ 2006 HOOD 182 LOG PICKER; S/N 187178; W/ 2016 HULTDINS SG520S SUPER GRIP 8,000KG GRAPPLE; (GRAPPLE COST C,000); 3 STAGE PUMP W/ OIL COOLER ON PICKER; W/ (4) DOUBLE REAR TIRE CHAINS
412	SPARE ORIGINAL HOOD 182 LOG GRAPPLE ASSEMBLEY (COMPLETE & OPERATING)
413	2005 WABASH WATER TANK TRAILER; VIN #87811092H18066917; 16,930 LITRE; W/ HOSES & VALVES
414	1996 WABASH WATER TANK TRAILER; VIN #2W9100D1XTS040673; 16,330 LITER; W/ HOSES & VALVES
415	12' FORKLIFT SNOW PLOW ATTACHMENT
416	LOG GRAPPLE FOR JOHN DEERE 644J WHEEL LOADER
417	LOG GRAPPLE FOR CAT IT18 WHEEL LOADER
418	OPEN
419	6'7" BUCKET FOR CAT IT18
420	WELDCO BEALES WBM 6'7" LOG GRAPPLE FOR CAT 966D
421	6'9" LOG GRAPPLE & 7'W FORKLIFT FRAME FOR CAT 950 WHEEL LOADER (NOTE: NON-RUNNING CAT 950 WILL BE SOLD ON DAY 2 AS LOT 1152)
422	66" LOG GRAPPLE FOR CASE SKID STEER
423	BUSH RAKE FOR CAT D6 DOZER
424	20' LIFT EXTENSION POLE FOR 966 OR 644 GRAPPLE
425	QUICK ATTACH CLEANOUT BOOM POLE FOR JD 318D
426	FORKS FOR JOHN DEERE 318D SKID STEER
427	OPEN
428	OPEN
429	SALE PROCEEDS TO FIRE SUPPRESSION BUILDING
430	FIRE SUPPRESSION SYSTEM, COMPRISED OF PUMP CONTROLS: CUTLER-HAMMER FD100-12L-N-A-F-R2; 1PH 120V; 560 HOURS; PERKINS 6 CYLINDER DIESEL PUMP; 157-165 BHP; 1792/2600 40 70334 U631890;
431	FIRE SUPPRESSION BUILDING, LIGHTS, HEATER, SERVICE PANEL, ETC.
432	OPEN
433	OPEN
434	OPEN
435	OPEN
436	OPEN
437	OPEN
438	OPEN
439	SALE NOW PROCEEDS TO MAIN MILL ELECTRICAL ROOM
440	ELECTROTEK AUTO POWER FACTOR CORRECTION UNIT, 600V; S/N 12-19793-01; 900 KVAR; ESTAMET PFC-N DIGITAL CONTROLLER
441	SIEMENS 8PX3 15 SECTION MCC; 58 SWITCHES, MAIN 2000 AMP SWITCH, METERING SECTION;
442	ALLEN-BRADLEY BUL2100 4 SECTION MCC; 10 SWITCHES
443	SIEMENS 2 SECTION MCC, 6 SWITCHES;
444	BENSHAW 150HP SOLID STATE SOFT START; MODEL RS7-150-5-12
445	BENSHAW 150HP SOLID STATE SOFT START; MODEL RS7-150-5-1
446	BENSHAW 125HP SOLID STATE SOFT START; MODEL RS6-125-5-12
447	BENSHAW 125HP SOLID STATE SOFT START; MODEL RS6-125-5-12
448	BENSHAW 100HP SOLID STATE SOFT START; MODEL RS6-100-5-12
449	BENSHAW 100HP SOLID STATE SOFT START; MODEL RS6-100-5-12
450	SQUARE D 25 KVA TRANSFORMER; 240 X 480H - 120/240V;
451	MAGNATEK 75 KVA TRANSFORMER, 480V - 208/120V;
452	ALLEN-BRADLEY 1336 VARIABLE FREQUENCY DRIVE
453	ALLEN-BRADLEY 1336 VARIABLE FREQUENCY DRIVE
454	(2) RELIANCE 6U3000/SB VARIABLE FREQUENCY DRIVES, 10HP
455	SWITCHGEAR ON BOTH WALLS, (3) 100 AMP; (2) 60 AMP; (6) 30 AMP SWITCHES & (2) SPLITTER BOXES
456	(2) SQUARE D 225 AMP SERVICE PANELS
457	2 SHELF UNITS OF NEW STARTERS, SWITCHES, FUSES, SWITCH HANDLES, SPARE TECK CABLE, ETC.
458	(2) BOXES JOHNS MANVILLE MICRO-LOK HP FIBERGLASS PIPE INSULATION, 1/2 X 1 & 5/8 X 1
459	ALL TECK CABLE THROUGHOUT MILL BUILDING
460	SQUARE D 400 AMP 600V SWITCH
461	OPEN
462	OPEN
463	OPEN
464	OPEN
465	OPEN
466	OPEN
467	OPEN
468	OPEN
469	SALE NOW PROCEEDS UPSTAIRS TO MILL ELECTRICS & FILING ROOM
470	ALLEN-BRADLEY SINGLE SECTION MCC; BUL2100; HEWSAW ARBOR SWITCHES; (3) 100; (1) 60 & (13) 30 AMP SWITCHES
471	SQUARE D SWITCHES FOR HEWSAW; (3) 100 AMP & (10) 30 AMP SWITCHES
472	SQUARE D 60 AMP & (4) 30 AMP SWITCHES
473	ALLEN-BRADLEY SOFT START FOR MCGEHEE EDGER
474	ALLEN-BRADLEY 3 SECTION MCC; BUL2100; 1200 AMP HOR; 300 AMP VERT; (9) SWITCHES; W/ ALLEN BRADLEY VFD CABINET FOR HEWSAW
475	ALLEN BRADLEY 2 SECTION MCC; BUL2100; 1200 AMP HOR; 300 AMP VERT.; (6) SWITCHES
476	ALLEN-BRADLEY VFD CABINET FOR MCGEHEE EDGER FEEDWORKS
477	SQUARE D 30 ANN KVA TRANSFORMER; 480-208/120V;
478	SPARE FUSES FOR NEWNES MCGEHEE CURVE SAW EDGER SOFT START (LOT 473)
479	SQUARE D 225 AMP SERVICE PANEL
480	MILLER XMT 350 WELDER
481	LOT OF (35) 20" CHIPPER KNIVES
482	LOT OF (10) 34" EDLF SAW BLADES, 250 KERF
483	LOT OF (8) 22" TRIM SAW BLADES
484	LOT OF (21) 16" SAW BLADES
485	LOT OF (16) 14" HEWSAW BLADES
486	HEWSAW KNIFE GRINDER, MODEL P953693
487	GM&E BENT KNIFE GRINDER, MODEL 41; S/N 70
488	MICROCUT BM-200E MULTI-PURPOSE SHARPENER
489	PROMAC PNEUMATIC BABBITT JIG CLAMP, FOR MCGEHEE SAW GUIDES
490	LOT OF 7/8" (22MM), 1-1/4" & 2' SPACERS FOR MCGEHEE CURVE EDGER
491	LOT OF COLLARS FOR CARDINAL EDGER
492	GUIDES FOR MCDONOUGH EDLF
492A	LOT OF 17" SAW BLADES
493	LARGE LOT OF HEWSAW BLADES
494	LOT OF HEWSAW PARTS & CHIPPING KNIVES
495	DOUBLE BENCH GRINDER
496	CABINET OF HEWSAW BEARINGS, GRINDING WHEELS
497	LOT OF HEWSAW PARTS & CHIPPING KNIVES
498	LOT OF HYDRAULIC PARTS FOR EDLF CANTER & EDGERS
499	METRIC BOLT BIN & CONTENTS
500	(2) BLUE BOLT BINS & CONTENTS OF STANDARD FASTENERS
501	BOLT BIN & SPECIALTY BOLTS
502	STANDRIDGE GRANITE SURFACE TABLE, 18" X 24"
503	LOT OF HEWSAW PARTS
504	LOT OF MCDONOUGH EDLF CANTER PARTS
505	LOT OF NEW HONEYWELL SWITCHES, FUSES, ETC. IN DRAWERS
506	CONTENTS OF UPPER CABINETS: FUSES, BULBS, ETC.
507	VALLEY MACHINE WORKS GUIDE MILLING MACHINE, 2 HEADS
508	IMW 24055 GUIDE MILL
509	LOT OF 34" MCDONOUGH EDLF SAW BLADES
510	WILLIAMS & WHITE 36DF STRETCHER ROLL; S/N 36353
511	29" TURNTABLE ANVIL, RAISED, ON HD STEEL BASE
512	(2) SMALL ANVILS
513	REFORM AR13 FLAT KNIFE GRINDER, TYPE L; S/N 3928 88
514	WRIGHT W-150HD-B TOP & FACE GRINDER (DALTECH 512M)
515	WRIGHT W-350 AUTO DUAL SIDE GRINDER; (DALTECH 560M)
516	WRIGHT 150HD GRINDER, S/N F9321; TOP, FACE & V-NOTCH
517	WRIGHT W-725 STROBE GRINDER; TOP & FACE
518	OXY-ACETYLENE TORCH SET
519	COMCO TIPPING TURNTABLE
520	BABBITT POT SYSTEM, BENCH & HOOD VENT; NATURAL GAS
521	CABINET OF CARBIDE SAW TIPS
522	(2) STARRETT DIAL INDICATORS
523	LOT OF BABBITT INGOTS
524	BABBITT PNEUMATIC CLAMP FOR EDLF
525	LOCKERS & CONTENTS OF DIAMOND DRILLING WHEELS
526	GRINDING ROOM EXTRACTION FAN & PIPING
527	WESTWARD 8" DOUBLE BENCH GRINDER
528	SHOP BUILT GUIDE TOLERANCE CLAMP
529	TECOMEC FL136 CHAINSAW SHARPENER
530	8' STEEL WORK BENCH
531	RECORD NO. 6 BENCH VISE
532	KEY KNIFE GRINDER, .5HP 120/208/230 1PH' 3450 RPM
533	MCDONOUGH CANTER KNIVES
534	EXTRA WINGS FOR MCDONOUGH ELDF CANTER
535	PARTS WASHER & PUMP
536	ACME CIRCULAR SAW SHARPENER
537	ACME CIRCULAR SAW SHARPENER
538	FOLEY INDEX GRINDER
539	LOT OF BABBITT INGOTS
540	AIR HOSE REEL & FLOOR STAND FAN
541	(2) PAILS OF COUGAR 707 COOLANT
542	(2) PARTS DRAWERS & CONTENTS
543	OPEN
544	OPEN
545	OPEN
546	OPEN
547	OPEN
548	OPEN
549	SALE PROCEEDS TO MILL BASEMENT & HYDRAULICS ROOM
550	DAYCO NP60 AUTO HYDRAULIC CRIMPER & DIES
551	DEWALT DW879 FRICTION CUT-OFF SAW
552	3HP COMPRESSOR, 575V
553	1H BARREL DUST EXTRACTOR
554	SHELF UNIT & HOSE FITTINGS
555	PARTS BIN W/ HOSE FITTINGS
556	PARTS BIN W/ HOSE FITTINGS
557	MISC. FITTINGS ON FLOOR & WOOD BIN
558	(2) COILS OF WATER HOSE
559	HOSE DISPENSER RACK & CONTENTS OF (6) FULL & PARTIAL HOSE COILS, 4000H, ETC.
560	SHELF UNIT OF CAST IRON FITTINGS
561	SPRINKLER SYSTEM MANIFOLD, VALVES, ETC.
562	SHELF UNIT OF VICTAULIC COUPLINGS
563	OPEN
564	OPEN
565	NEW 46" EXTERIOR WHITE DOOR & JAMB
566	PORTABLE HYDRAULIC FILTRATION PUMP & CART
567	CONTENTS OF PARTS ROOM; BEARINGS, PILLOW BLOCKS, SPLIT BEARINGS, SPROCKETS, SHEAVES, TRANSFER CHAIN, CHIPPING HEAD BELT, ETC.
568	(2) BENCHES OF ASSORTED HYDRAULIC CYLINDERS
569	BOXES & COILS OF NEW TRANSFER CHAIN; H78B; DIAMOND X01470-101, X-1334-010; X-1172-010
570	(2) STEEL & WOOD WORK BENCHES
571	WOOD BIN UNIT W/ CHAIN REPAIR & LINKS
572	WHEEL BARROW & CONTENTS
573	PALLET OF (2) BOX CHAIN END ROLLS
574	SM-CYCLO H3185 GEAR DRIVE, 43:1; 1750HP; INPUT 23 - OUTPUT 33,000
575	IDLER FOR LONG LINK MAIN WASTE CONVEYOR
576	HEWSAW RIP SAW ARBOR
577	50HP MOTOR, 575V 1770 RPM
578	GEAR REDUCER
579	RADICON REDUCER
580	(NEW IN BOX) EDLF ARBOR BUTTONS
581	HEWSAW SPARE HYDRAULIC PUMP
582	SPARE STACKER EVEN ENDING FENCE MOTOR
583	MCDONOUGH EDLF SPARE DRIVE
584	SPIKE ROLL ARM FOR CAMBIO 18" DEBARKER
585	SPIKE ROLL ARM FOR CAMBIO 18" DEBARKER
586	SPIKE ROLL ARM FOR CAMBIO 18" DEBARKER
587	SPIKE ROLL ARM FOR CAMBIO 18" DEBARKER
588	SPIKE ROLL ARM FOR CAMBIO 18" DEBARKER
589	SPIKE ROLL ARM FOR CAMBIO 18" DEBARKER
590	FEED ROLL SHAFT & HOUSING FOR CAMBIO 30" DEBARKER
591	30" FEED ROLL TENSION CYLINDER
592	EDLF SPARE HYDRAULIC PUMP
593	EDLF SPARE DRIVE FOR LOG TURNER
594	SPARE REBUILT PUMP FOR BIN BELT, 32.12:1
595	GIR-DEL 23-2450 HYDRAULIC PUMP
596	REX PLANETGEAR 7.5HP DRIVE, 12:1
597	SPARE HYDRAULIC PUMP
598	REBUILT REXNORD GEAR DRIVE, TYPE SFN55B31.51
599	3HP MOTOR, 575V 1755 RPM
600	HEWSAW SPARE 7.5HP MOTOR
601	3HP MOTOR FOR CARDINAL BOARD EDGER TAILING TRANSFER; 575V 1760 RPM
602	5HP MOTOR, 575V 1745 RPM; 184TC FRAME
603	5HP MOTOR, 575V 1745 RPM; 184TC FRAME
604	2 TRIM SAW ARBOR DRIVES; 5HP 575V 3470 RPM
605	10HP MOTOR, 575V 1170 RPM; 256T FRAME
606	15HP MOTOR, 575V 1765 RPM; 254T FRAME
607	15HP MOTOR, 575V 1175 RPM; 284T FRAME
608	20HP MOTOR, 575V 1750 RPM; 256T FRAME
609	50HP MOTOR, 575V 1765 RPM; 326T FRAME
610	10HP MOTOR, 575V 1745 RPM
611	10HP MOTOR, 575V 1760 RPM
612	3HP MOTOR, 575V 1760 RPM
613	7.5HP MOTOR, 575V 1755 RPM
614	3HP MOTOR, 575V 1760 RPM
615	5HP MOTOR, 575V 1745 RPM
616	PLANETGEAR VENUS 441 GEAR DRIVE
617	3HP MOTOR, 208/230/460V 1775 RPM
618	7.5HP MOTOR, 460V 1760 RPM
619	7.5HP MOTOR, 230/460V 1755 RPM
620	7.5HP MOTOR, 230/460V 1755 RPM
621	7.5HP MOTOR 460V 1755 RPM
622	10HP MOTOR, 230/460V 1755 RPM
623	RADICON 44.338:1 REDUCER, MODEL M082245-BANP1
624	REXNORD 29:1 TYPE SFN45B31051 GEAR DRIVE
625	HEWSAW 7.5HP SPARE MOTOR, 575V 1750 RPM
626	(2) BALDOR L3500 MOTORS, (1 NEW); 1/4HP 115V/220V 1PH
627	DAVID BROWN AU700B REDUCER, MODEL R400278/81; 5/I-R
628	WESTERN 15HP GEAR DRIVEL 8:1
629	MARATHON 1/3HP LUBE PUMP
630	LUBE PUMP MOTOR FOR CAMBIO 30" DEBARKER RING, OR EDLF SAW GUIDE, OR EDLF RAILS
631	NEW SPARE ARBOR FOR NEWNES MCGEHEE CURVE SAW EDGER
632	WOOD BIN UNIT OF BOLTS & CHAIN
633	1 TON CHAIN HOIST & TROLLEY ON 7' JIB BOOM
634	(2) LINKAGES FOR CAMBIO 30" DEBARKER
635	(2) LINKAGES FOR CAMBIO 18" DEBARKER
636	CANARM S18-F1 18" WALL FAN
637	400 AMP SWITCH
638	LOT OF TECK CABLE, SWITCH, ETC.
639	SPARE 65" SLASHER SAW BLADE
640	BOX OF DONN 12' SUSPENDED CEILING STRIPS
640A	MDI METAL DETECTOR CONTROL & CONVEYOR MAGNET
640B	LOT OF SCANNER BARS
641	ALL DRIVE BELTS ON BASEMENT WALL
642	(2) DEBARKER RING BEARING KITS, (1 NEW) & PARTS
642A	HEWSAW ROSTA TENSIONERS
642B	NEW TIRE TUBES FOR CARDINAL EDGER OUTFEED
643	ASSORTED STEEL SHAFT, TUBE, CYLINDERS ON RACK
644	SPARE 18" CAMBIO DEBARKER RING
645	OPEN
646	SALE MOVES TO TOOL ROOM
647	CHAIN ON WALL
648	SHELF OF NEW BEARINGS
649	REMAINING CONTENTS OF SHELVES - SAWMILL PARTS
650	LINCOLN TRANSFER PUMP
651	ASSORTED NEW PARTS ON WALL
652	3' X 4' STEEL ROLLING TABLE
653	ASSORTED PARTS IN WOOD CABINETS
654	SHELF OF NEW BEARINGS
655	(8) SHELVES OF MILL PARTS
656	SNAP-ON PARTS ORGANIZER
657	SHELF OF NEW BEARINGS
658	(8) SHELVES OF MILL PARTS
659	BOLT BIN & CONTENTS OF SLEEVES
660	BOLT BIN ON WALL & FITTINGS
661	ORANGE BOLT BIN & CONTENTS
662	LOCKER
663	STEEL MESH LOCKUP WALL & DOOR
664	BOLT BIN ON WALL
665	WESTWARD 8" DOUBLE BENCH GRINDER
666	BIN OF READY ROD
667	RECORD NO. 6 BENCH VISE
668	RECORD NO. 6 BENCH VISE
669	RECORD NO. 6 BENCH VISE
670	STEEL WORK TABLE, 3' X 7'
671	OPEN
672	OPEN
673	OPEN
674	OPEN
675	OPEN
676	OPEN
677	OPEN
678	OPEN
679	OPEN
680	OPEN
681	END OF DAY ONE - SEE YOU TOMORROW AT 9AM FOR DAY 2, STARTING IN THE TRUCK SHOP BUILDING
999	DAY 2 - THURSDAY, APRIL 10TH - 9AM START - TRUCK SHOP
1000	CHICAGO PNEUMATIC HD 1" PNEUMATIC INPACT WRENCH
1001	PROCORE 3/4 TON CHAIN HOIST
1002	WESTWARD HD 3/4" SOCKET SET+B1040
1003	MILWAUKEE ANGLE GRINDER
1004	POWER FIST 14 PCE COMBO WRENCH SETS
1005	(2) TIRE CHAIN TOOLS & CRIMPER
1006	LOT OF ASSORTED TOOLS
1007	(2) BOXES HILLMAN 1/2" X 6" LAG SCREWS
1008	8" DOUBLE BENCH GRINDER
1009	RECORD NO. 6 VISE
1010	STEEL TOP WORK BENCH, 22" X 33'
1011	LOT OF WELDING ROD
1012	LOT OF (5) HD SHACKLES
1013	LOT OF SHACKLES & HARDWARE
1014	(2) JACK STANDS
1015	FRONT WHEEL HUB FOR KENWORTH LOG TRUCK (NEW)
1016	GORILLA LCN14SS BENCH DRILL PRESS
1017	BOX OF ASSORTED TOOLS, WHEELS, ETC.
1018	BOX OF WHEEL WEDGES
1019	LOT OF TERMINAL CONNECTOR KITS, COTTER PIN KITS, ETC.
1020	TORK MAXI-BOX WIPE DISPENSER
1021	BOXES OF FLUIDS, CLEANERS, SOLVENTS, ETC.
1022	AUTO 50' HOSE REEL
1023	(2) FAIRVIEW BRASS FITTINGS CABINETS
1024	(5) BOXES OF BRASS FITTINGS
1025	(3) PANELS OF NEW 0-RINGS, INCL. BOILER ROOM WALL
1026	WALL CABINET & CONTENTS
1027	3' ROLLING STAIRCASE
1028	BLUE BOLT BINS; STANDARD & METRIC BOLTS & FASTENERS
1029	4 WHEEL BIN DOLLEY
1030	ROPE SLING, 3" X 20'
1031	SMALL ROD OVEN
1032	OPEN
1033	OPEN
1034	OPEN
1035	OPEN
1036	OPEN
1037	CAT BELTS ON STAIRCASE WALL
1038	ALL AIR FILTERS ON MEZZANINE
1039	ALL OIL FILTERS ON MEZZANINE
1040	(9) GRAPPLE TEETH FOR 955 GRAPPLE (LARGE)
1041	(9) GRAPPLE TEETH FOR CAT IT18 & JD 744 LOADERS
1042	DRIVE SHAFT FOR KENWORTH LOG TRUCK
1043	HYD. CYLINDER FOR CAT IT18
1044	BOOM CYLINDER FOR HOOD 182 LOG PICKER
1045	NEW TIRE FOR KENWORTH LOG TRUCK, 14:00R25
1045A	(2) USED TIRES FOR KENWORTH LOG TRUCK, 14:00R25
1046	SPARE TIRE & RIM FOR CAT 140G GRADER
1047	SPARE TIRE & RIM FOR CAT IT18
1048	(4) SPARE TIRES & RIMS FOR JOHN DEERE SKID STEER
1049	CYLINDERS FOR CAT IT18 GRAPPLE
1049A	BOOM CYLINDER FOR CAT IT18
1049B	DRIVE SHAFTS & STEERING CYLINDER FOR DAIWOO LOADER
1049C	REMAINING CYLINDERS ON SHELF
1049D	STABILIZER CYLINDER & (2) PTO DRIVE SHAFTS FOR HOOD 182 LOG PICKER
1049E	HYDRAULIC OIL COOLER FOR HOOD 182 PICKER
1049F	(2) NEW CUTTING EDGES FOR JOHN DEERE 5'6" BUCKET
1049G	(2) CYLINDERS FOR JOHN DEERE 644 GRAPPLE
1050	LOT OF STARTERS
1051	LOT OF ALTERNATORS
1052	REMAINING CONTENTS OF SHELF UNIT
1053	SNAP-ON HD SHELF UNIT, 6' X 2' X 6'H
1054	SNAP-ON HD SHELF UNIT, 6' X 2' X 6'H
1055	CONTENTS OF TOP SHELF: TIMKEN BEARINGS, ETC.
1056	REMAINING CONTENTS OF BOTTOM 3 SHELVES
1057	SHELF UNIT & CONTENTS IN LOCKUP CAGE
1058	LOT OF (4) COMMERCIAL BATTERIES
1059	MAKITA EW220R GAS POWERED TRASH PUMP, & HD INPUT HOSE
1060	BOX OF FIRE HOSE
1061	REMAINING CONTENTS OF CAGE, HOSE, ETC.
1062	LOCKUP CAGE, 4'3" X 8' X 8'H
1063	SPOOL OF GENERAL CABLE, AG14 FT4HL TECK 90XLPE
1064	BIN OF TIMKEN, SKF & NTH BEARINGS
1065	(2) BINS OF JOHN DEERE PARTS
1066	BIN OF CAT 140G GRADER PARTS
1067	BIN OF CASE PARTS
1068	(5) BINS OF DAIWOO PARTS
1069	REMAINING 20 BINS OF ASSORTED CAT PARTS
1070	STEEL 36 BIN PARTS CABINET, 12'L X 2'D X 8'H
1071	SHELF UNIT OF HIGH PRESSURE HYDRAULIC HOSES & FITTINGS, CRIMPED & ADAPTER
1072	(2) WALL BIN UNITS OF ADAPTERS & BRASS FITTINGS
1073	(2) WALL BIN UNITS OF ADAPTERS & FITTINGS
1074	AT MODEL 300-2 COMBO LATHE/MILL/DRILL, W/ STEADY REST, END MILLS, COLLETS, 3 JAW CHUCK, ETC.
1075	(5) BOXES MISC. PARTS
1076	CONTENTS OF 3 WALL SHELVES, HYDRAULIC QUICK CHANGE VALVES, ETC.
1077	ROTARY 5" BENCH VISE W/ PIPE CHUCK
1078	ROLLING STEEL WORK TABLE, 4' X 4'
1079	LOT OF ELECTRICAL CORDS
1080	(3) BARRELS VISIONMAX GROUP 9 HERBICIDE
1081	BARREL OF SAW 0W-40 ENGINE OIL
1082	BARREL OF NEW HYDRAULIC OIL
1083	(2) BARRELS OF DELO ELC ANTIFREEZE/COOLANT; PREMIX 50/50
1084	BARREL OF METHANOL, W/ HAND BARREL PUMP
1085	BARREL OF DELO ELC ANTIFREEZE/COOLANT; PREMIX 50/50
1086	NEW OIL HOLDING TANK & CONTENTS, 1110 LITER; W/ SW50 OIL; W/ ALEMITE PNEUMATIC PUMP; GRACO HOSE REEL & ALEMITE DIGITAL NOZZLE
1087	NEW HYDRAULIC OIL HOLDING TANK & CONTENTS, 1110 LITER; W/ SW50 OIL; W/ GRACO FIREBALL 30 PNEUMATIC PUMP; GRACO HOSE REEL & ALEMITE DIGITAL NOZZLE
1088	SECONDARY SPILL TRAY FOR OIL TANKS, 15'L X 2' X 2'H
1089	WASTE OIL DUMP SINK & OUTLET
1090	SHELF UNIT & CONTENTS OF ASSORTED FLUIDS
1091	LOT OF BROOMS & SHOVELS, ETC.
1092	LOT OF (5) FIRE EXTINGUISHERS
1093	MR. HEATER 210,000BTU KEROSENE SPACE HEATER
1094	PARTS WASHER
1095	POWER FIST PORTABLE HYDRAULIC PUMP UNIT, 2 GPM AT 3000 PSI; GAS POWERED
1096	EASY-KLEEN STEAM/PRESSURE WASHER; KOHLER 14HP GAS ENGINE
1097	HOTSY STEAM/PRESSURE WASHER, 2HP ELECTRIC 110V
1098	LOW PROFILE CREEPER & SNAP-ON CREEPER
1099	BARREL OF MEGAPLEX XD5 GREASE. W/ PNEUMATIC PUMP
1100	SHOP-VAC 6.5HP 16 GAL
1101	LARGE AXLE JACK
1102	CM 5 TON CHAIN HOIST
1103	CM 3 TON CHAIN HOIST
1104	OVERHEAD CRANE SYSTEM & SUPPORTS
1105	INGERSOLL-RAND 5HP COMRESSOR, 230/460V
1106	POWER FIST 50' AIR HOSE REEL
1107	(2) TRUCK JACKS
1108	NEW IN BOXES 20' LINKBELT #80 - 1 COTTERED ROLLER CHAIN
1109	NEW IN BOXES 30' LINKBELT #80 - 2 COTTERED ROLLER CHAIN
1110	NEW IN BOXES 60' DRIVES USA #160-1R RIVETED ROLLER CHAIN
1111	NEW IN BOXES 40' TSUBAKI RS200 RP RIVETED CHAIN
1112	NEW IN BOXES 20' TSUBAKI #120H-1 ROLLER CHAIN
1113	NEW IN BOX 10' TSUBAKI #200 RIVETED ROLLER CHAIN
1114	(4) AIRBOSS TIRES FOR CASE 95XT
1115	OPEN
1116	(2) REFLECTIVE SIGNS, "LOGGING TRUCKS TURNING" ON SLIDE-IN BASES, W/ (4) SPARE SIGNS, (2) W/ POSTS
1117	WESTWARD 1 TON, 1,000KG ELECTRIC HOIST, CHAIN & PENDANT
1118	OPEN
1119	OPEN
1120	OPEN
1121	OPEN
1122	OPEN
1123	OPEN
1124	OPEN
1125	OPEN
1126	OPEN
1127	OPEN
1128	OPEN
1129	OPEN
1130	OPEN
1131	OPEN
1132	OPEN
1133	OPEN
1134	OPEN
1135	OPEN
1136	OPEN
1137	OPEN
1138	OPEN
1139	OPEN
1140	OPEN
1141	OPEN
1142	OPEN
1143	OPEN
1144	OPEN
1145	OPEN
1146	OPEN
1147	OPEN
1148	OPEN
1149	SALE PROCEEDS TO YARD AROUND TRUCK SHOP
1150	HYUNDAI 320 BUTT’N TOP, S/N 00613; W/ WAYCON REAR ENTRY CAB; W/ LOG GRAPPLE; CRACKED WELD ON TURRET
1151	STEIGER COUGAR LOG HAULER TRACTOR; S/N 20856
1152	CAT 950 WHEEL LOADER, FOR PARTS; S/N 73J0478; W/ WELDCO BEALES QC 9’ BUCKET; CAT ENGINE; MICHELIN 20.5R25 TIRES; SPARE TIRE
1153	DAEWOO MEGA 250 III WHEEL LOADER, S/N 31016; OAEOLIS 20.5R25 TIRES; RUNNING MACHINE; NEEDS NEW REAR DIFFERENTIAL
1154	WELDCO BEALES WBM 9' BUCKET FOR DAIWOO WHEEL LOADER
1155	WBM 6'7" LOG GRAPPLE FOR DAIWOO WHEEL LOADER
1156	12' TILT HOIST W/ ROLLCASE; 5' PACKAGES
1157	TILT HOIST POWER ROLLCASE INFEED
1158	STEEL FRAME
1159	OPEN
1160	2 TANK FUEL STATION, 2,000 GAL DIESEL, 1,000 GAL GAS TANKS, EACH W/ HOSE & NOZZLE; ON DOUBLE TANK FRAME
1161	LAND EAST 10" X 52' GANG/2 POCKET BOARD EDGER, 400HP 600V
1162	DEL SCHNEIDER HYDRAULIC TANK ON SPILL TRAY
1163	LAND EAST POSITIONING EDGER INFEED FOR LOT 1161; (6) 54" ROLLS; (2) DOUBLE HOLD DOWN ROLLS
1164	LAND EAST LUG LOADER FEED TO EDGER INFEED
1165	14' BOX CHAIN INCLINE CONVEYOR, W/ DRIVE
1166	IN DOOR OF SHOP BLDG: (2) CYLINDERS FOR DAIWOO WHEEL LOADER
1167	OPEN
1168	OPEN
1169	OPEN
1170	NEWNES 24' ENCLOSED 10 SAW TRIM SAW
1171	OPEN
1172	NEWNES 20' TRIMMER INFEED TABLE, 10'6" X 22'W; W/ (6) JUMP CHAIN ARM SECTION
1173	SM-CYCLO H3185 DRIVE
1174	NEWNES ROBO 28" FULLY OPTIMIZED 2 POCKET EDGER, 200HP 480V DRIVE (NOTE: BLUEPRINTS IN OFFICE)
1175	OPEN
1176	OPEN
1177	ALL NEWNES ROBO EDGER INFEEDS, (2) NEWNES SCANNER BOXES, CONVEYORS & TRANSFERS, PICKERS, ETC. (NOTE: BLUEPRINTS IN OFFICE)
1178	CAE NEWNES 40HP HYDRAULIC POWER UNIT; 460V 1175 RPM
1179	OPEN
1180	WESTERN 11' X 90' TRUCK SCALE; 85,000KG CAPACITY; STEEL DECK; OUTSIDE READOUT, WESTERN CONTROLS, INCL. ACCURATE SCALE, MODEL M2000A-25B & EPSON PRINTER (AVAILABLE SUBJECT TO LOT 1 BID ON PROPERTY)
1181	NEWNES 16' 5 ARM LUMBER STACKER
1182	HAHN LOG HARVESTER, S/N HPLD01038909; W/ SERCO 125 HEAD, JOHN DEERE 6 CYLINDER DIESEL ENGINE; ALL HYDRAULIC
1183	QM INDUSTRIES 20' ENCLOSED TRIM SAW, 10 SAW STATIONS, W/ CYLINDERS
1184	REMAINING EQUIPMENT, STEEL & SCRAP METAL IN BACK YARD AREA
1185	ATCO 10' X 20' MODULAR OFFICE
1186	OPEN
1187	OPEN
1188	OPEN
1189	SALE PROCEEDS TO MAIN MILL BUILDING LEAN-TO
1190	A-FRAME STEEL RACK W/ STEEL CONTENTS
1191	(3) STICK BUNKS
1192	SULLAIR LS-12 50HP SCREW COMPRESSOR, 210 CFM; 25,412 HOURS
1193	SULLAIR 10-25 AIR COMPRESSOR, 105 CFM; 575V
1194	SULLAIR SAR 12S COMPRESSED AIR DRYER, 100/125 PSIG
1194A	DOMNICK HUNTER DXS 103 PNEU DRI ELECTRONIC COMPRESSED AIR DRYER, S/N 25126A; 110V; 10.5 BAR G
1194B	SULLAIR 30HP COMPRESSOR; 230/460V
1195	MANCHESTER AIR RECEIVING TANK
1196	AIR RECEIVING TANK
1197	CAE 7 KNIFE 60" CHIPPER, REBUILT
1197A	ARCHER SIZE 50 BLOWER, 75HP 575V MOTOR
1197B	ALLIED SIZE 40 TWIN BLOWER SYSTEM, RATED FOR 50HP DRIVE
1197C	75HP MOTOR, 575V 1761 RPM
1197D	DEWALT RADIAL ARM SAW
1197E	STEEL STOCK RACK WITH SECTIONS OF SPARE CATWALK & FORKLIFT BIN, 16"H X 4' X 8'
1197F	NEW ROSEMEX H-144 UNIT HEATER, A.O. SMITH 1/3HP MOTOR, 115V 1PH
1197G	NEW ROSEMEX H-144 UNIT HEATER, A.O. SMITH 1/3HP MOTOR, 115V 1PH
1197H	NEW ROSEMEX H-144 UNIT HEATER, A.O. SMITH 1/3HP MOTOR, 115V 1PH
1197I	NEW ROSEMEX H-144 UNIT HEATER, A.O. SMITH 1/3HP MOTOR, 115V 1PH
1197J	NEW ROSEMEX H-144 UNIT HEATER, A.O. SMITH 1/3HP MOTOR, 115V 1PH
1197K	(2) NEW MAGNATEK 77505-02 BELT MAGNETS, 16" X 20"
1197L	BOXES OF ASSORTED CIRCULAR & STRAIGHT SAW BLADES FOR DECORATIVE PAINTING & OTHER PURPOSES
1198	MILLER BOBCAT 225 CC/CV AC/DC WELDER, W/ 11,000 WATT GENERATOR
1199	SIMONDS OPTIMATIC KRO 910 AUTO LEVELER
1199A	GM&E GRINDER
1200	LM 100MP-7-55 PACKAGE SAW, 10HP 575V
1201	SPEEDER 7" HORIZONTAL BANDSAW
1202	WESTEEL FUEL TANK, W/ GPI 1505 PUMP
1203	OPEN
1204	8' SPREADER BAR
1205	TOSHIBA 400HP TEFC MOTOR, 1180 RPM 575V; FRAME 5010 US
1206	RELIANCE 200HP MOTOR, 460V 1785 RPM - SEE PIC
1207	RELIANCE 200HP MOTOR, 460V 1785 RPM - SEE PIC
1207A	SM-CYCLO H-3215 DRIVE; RATIO 21:1; INPUT 75.3HP; OUPUT 52,700 FT LB; 1750RPM
1207B	SM-CYCLO H-3195 DRIVE, RATIO 35:1; W/ 7.5HP MOTOR 230/460V 1760 RPM
1207C	SM-CYCLO HS-3190 DRIVE; RATIO 29:1; 32.7HP INPUT; 31,600 FT LB OUTPUT TORQUE
1207D	SM-CYCLO CHHJ-6195Y-15 DRIVE; INPUT 64.6 HP; OUPUT TORQUE 33,100 FT LB; 1750 RPM
1207E	SM CYCLO CHH-4190Y-29 DRIVE; RATIO 219:1; INPUT 32.4HP; OUPUT TORQUE 31,600 IN-LB; 1750 RPM
1207F	SM-CYCLO H3205 DRIVE; RATIO 43:1; INPUT 43 HP; OUTPUT TORQUE 60,500 FT-LB;
1207G	GEARMOTOR 10HP DRIVE; 208/230/460V; 120 RPM
1207H	SM-CYCLO CHHM8-4130YC DRIVE; RATIO 6:1; INPUT 7.5HP; OUPUT 29,167 FT-LB
1207I	(3) SPARE 60" SLASHER SAW BLADES
1208	LONG LENGTH CYCLONE, 12' X 30'H; 52' INTAKE X 12" OUTPUT (IN YARD)
1209	LONG LENGTH CYCLONE, 9' X 22'; 40" INTAKE X 15" OUTPUT (IN YARD)
1210	SALE PROCEEDS TO COMPRESSOR BUILDING
1211	LOTS 1212 - 1217 ARE SOLD SUBJECT TO A COMBINED BID IN LOT 1218
1212	ATLAS COPCO GA75 ROTARY SCREW COMPRESSOR, 100HP
1213	CURTIS 100HP SCREW COMPRESSOR, MODEL RS1000 AE-E25
1214	AIR FORCE HR500 AIR DRYER, S/N 148209; 500 CFM, 150 PSI
1215	AIR RECEIVING TANK
1216	SQUARE D 200 AMP SWITCH
1217	8' X 40' SHIPPING CONTAINER, W/ POWER, LIGHTS, HEAT
1218	COMBINED BID FOR LOTS 1212 THROUGH 1217 INCLUSIVE
1219	(4) SECTIONS OF CABLE TRAY
1220	LARGE STEEL DUMP BIN
1221	SMALL STEEL DUMP BIN
1222	MAIN 1500KVA MILL TRANSFORMER
1223	ORANGE STEEL BIN
1224	ROLL OF CONVEYOR BELTING
1225	OPEN
1226	OPEN
1227	OPEN
1228	OPEN
1229	SALE PROCEEDS TO DRY STORAGE AREA BY COMPRESSOR CONTAINER
1230	(4) BOXES OF J-BAR SORTER HOOKS
1231	100HP MOTOR, 575V 1770 RPM
1232	60HP MOTOR, 575V
1233	100HP MOTOR, 460V 3570 RPM (MCGEHEE EDGER)
1234	150HP MOTOR, 575V 3500 RPM, (HEWSAW ARBOR)
1235	200HP MOTOR, 575V 1800 RPM
1236	50HP MOTOR, 575V 1770 RPM
1237	75HP MOTOR, 575V 1775 RPM
1238	150HP MOTOR, 575V 3500 RPM, (HEWSAW ARBOR)
1239	60HP MOTOR, 575V 1800 RPM
1240	TWIN 50HP HYDRAULIC POWER UNIT, 575V
1241	50HP & 20HP VARIABLE SPEED HYDRAULIC POWER UNIT
1242	(2) PALLETS OF BOX CHAIN
1243	PALLET OF ASSORTED PARTS & ELECTRICAL
1244	PALLET OF RADICONS, SPIKE ROLL, PARTS
1245	PALLET OF ASSORTED SPROCKETS
1246	PALLET OF ASSORTED PARTS, ETC.
1247	OPEN
1248	OPEN
1249	MCDONOUGH EDLF CHIPPING CANTER PARTS ON PALLET
1250	(5) PALLETS OF ASSORTED SPARE PARTS
1251	SUREFLAME SPACE HEATER
1252	(3) PALLETS OF ASSORTED SPARE PARTS
1253	PALLET OF HEWSAW PARTS
1254	CRATE OF SORTER PARTS & UMHW
1255	SUREFLAME SPACE HEATER
1256	NEW SPARE RADIAL PISTON DRIVE FOR SORTER
1257	(3) 5HP SPARE MOTORS
1258	30" DEBARKER SPIKE ROLL
1259	(4) 18" DEBARKER SPIKE ROLLS
1260	(3) HEWSAW INFEED WHEELS (OUTSIDE)
1261	LOT OF STEEL BANDING (OUTSIDE)
1262	PALLET OF (4) PARTIAL ROLLS FLAT & CHEVRON BELTING
1263	ACKLANDS TIGERCAT CC/CV AC/DC 8000 WATT PORTABLEWELDER/POWER GENERATOR; P/W ONAN P216 GAS ENGINE, ON ROLLING DECK PLATFORM
1264	SAS TWIN 50HP HYDRAULIC POWER UNIT W/ RESERVOIR & SPILL TRAY
1265	STEEL WORK TABLE, 5' X 9'
1266	RUBBER END ROLL S-DRIVE ASSEMBLY, FOR 12" BELT; W/ SM-CYCLO H-3190 DRIVE & 7.5HP 460V MOTOR
1267	5 STRAND CHAIN TRANSFER END ASSEMBLY, W/ SHAFT, SPROCKETS & 7.5HP MOTOR, 1755 RPM 575V
1268	PALLET OF SCALPING ROLLS & RACK
1269	PALLET OF HYDRAULIC PUMPS & MOTORS, SHEAVES & BELTS
1270	PALLET OF DRIVE BELTS
1271	COMPRESSOR & TANK, NO MOTOR
1272	(2) TRANSFER CHAIN RUNS
1273	OPEN
1274	SALE PROCEEDS TO LUNCH ROOM & OFFICE BUILDING FURNISHINGS
1275	CRANE 172 COIN OPERATED VENDING MACHINE
1276	NEW NEW 36" ROUND LUNCHROOM TABLE, DARK WOOD FINISH
1277	NEW NEW 36" ROUND LUNCHROOM TABLE, DARK WOOD FINISH
1278	NEW NEW 36" ROUND LUNCHROOM TABLE, DARK WOOD FINISH
1279	NEW NEW 36" ROUND LUNCHROOM TABLE, DARK WOOD FINISH
1280	NEW NEW 36" ROUND LUNCHROOM TABLE, DARK WOOD FINISH
1281	NEW NEW 36" ROUND LUNCHROOM TABLE, DARK WOOD FINISH
1282	(4) BLACK VINYL STACKING CHAIRS
1283	(4) BLACK VINYL STACKING CHAIRS
1284	(4) BLACK VINYL STACKING CHAIRS
1285	(4) BLACK VINYL STACKING CHAIRS
1286	(4) BLACK VINYL STACKING CHAIRS
1287	(4) BLACK VINYL STACKING CHAIRS
1288	(4) BLACK VINYL STACKING CHAIRS
1289	SECTION OF (4) STAFF LOCKERS
1290	SECTION OF (5) STAFF LOCKERS
1291	SECTION OF (5) STAFF LOCKERS
1292	SECTION OF (5) STAFF LOCKERS
1293	SECTION OF (3) STAFF LOCKERS
1294	SECTION OF (3) STAFF LOCKERS
1295	SECTION OF (5) STAFF LOCKERS
1296	BROWN LEATHER LOOK EXECUTIVE ROLLING SWIVEL TILT CHAIR; WOOD ARM ACCENTS
1297	BLACK LEATHER LOOK EXECUTIVE SWIVEL TILT CHAIR
1298	6' WHITE BOARD
1299	STAFF FILE HOLDERS
1300	MERIDIAN PHONE SYSTEM KSU & EATON UPS UNIT; W/ ALL HANDSETS IN OFFICE & MILL; (MUST REMAIN FOR 1 MONTH FOLLOWING AUCTION)
1301	BEL FIRE/TROUBLE ALARM & DIALER (MUST REMAIN INSTALLED UNTIL MILL DISMANTLING & REMOVAL PERMITS)
1301A	PRIMO WATER DISPENSER & SPARE FULL & EMPTY BOTTLES
1302	(2) WHITE BOTTLE SHELF UNITS
1303	DANBY BRUSHED STAINLESS MICROWAVE
1304	SYLVANIA BRUSHED STAINLESS MICROWAVE
1305	WHITE FRIDGE FREEZER
1306	KEURIG & BUNN COFFEE MAKERS
1307	4' & 3' WHITE BOARDS
1308	CONTENTS OF SHELVES & DRAWERS; KITCHEN SUPPLIES, ETC.; EXCLUDING CABINETS
1309	SNAIL-TECH STAINLESS HOT AIR HAND DRYER; MOTION ACTIVATED
1310	SNAIL-TECH STAINLESS HOT AIR HAND DRYER; MOTION ACTIVATED
1311	SNAIL-TECH STAINLESS HOT AIR HAND DRYER; MOTION ACTIVATED
1312	(17) MAPLE LUNCH ROOM/DINING CHAIRS W/ SEAT PADS
1313	OPEN
1314	OPEN
1315	OPEN
1316	OPEN
1317	OPEN
1318	OPEN
1319	OPEN
1320	OPEN
1321	OPEN
1322	OPEN
1323	OPEN
1324	SALE PROCEEDS TO OFFICE BUILDING
1325	PINE FRONT COUNTER, L-SHAPED 8' X 16'
1326	(2) MATCHING PINE WOOD OFFICE CABINETS
1327	(2) EXECUTIVE SWIVEL TILT OFFICE CHAIRS
1328	4 DRAWER LATERAL FILING CABINET
1329	4 DRAWER LATERAL FILING CABINET
1330	ASTRON SL-11A 2 WAY RADIO SYSTEM, BASE STATION & ALL PORTABLE RADIOS
1331	CANON CANOSCAN 8600F SCANNER
1332	OPEN
1333	ROLLING COPIER BASE
1334	HP OFFICEJET PRO 8620 ALL-IN-ONE PRINTER
1335	HP LASERJET P3015 PRINTER
1336	CANON PIXMA PRO9000 PRINTER
1337	HP PRINTER
1338	WOOD BOARDROOM TABLE, 10' X 4'
1339	EXECUTIVE SWIVEL TILT CHAIR
1340	(6) BLACK STACKING CHAIRS
1341	MATCHING PINE WOOD SINGLE PEDESTAL DESK
1342	DANBY PORTABLE AIR CONDITIONER
1343	OPEN
1344	OPEN
1345	OPEN
1346	OPEN
1347	FRIGIDAIRE MICROWAVE
1348	DANBY BAR FRIDGE
1349	MAGNASONIC WATER COOLER
1350	DOUBLE PEDESTAL OAK FINISH DESK
1351	MAIN NETGEAR & INTELLINET HUB & RACK
1352	(4) CLASSIC TURBO HEATER & FAN; (3) NEW IN BOXES
1353	APC UPS UNIT
1354	NEW IN BOX FRIGIDAIRE 5,000 BTU WINDOW AIR CONDITIONING UNIT
1355	LEFT HAND RUN-OFF WOOD FINISH DESK
1356	EXECUTIVE LEATHER LOOK SWIVEL TILT CHAIR
1357	EXECUTIVE LEATHER LOOK SWIVEL TILT CHAIR
1358	MATCHING 9' PINE WALL UNIT, 5 DRAWERS & (2) 2 DOOR CABINET & BOOKSHELVES
1359	MEZZANINE: (3) 4 DRAWER LEGAL FILING CABINETS
1360	OPEN
1361	OPEN
1362	OPEN
1363	OPEN
1364	OPEN
1365	OPEN
1366	OPEN
1367	OPEN
1368	OPEN
1369	OPEN

CONSIGNMENTS

CONSIGNMENTS OF QUALITY ROLLING STOCK, LOGGING & CONSTRUCTION EQUIPMENT WELCOME AT THIS MAJOR TWO DAY SALE.

ROLLING STOCK

2007 John Deere 644J Wheel Loader, EROPS; W/ Bucket; Spare Grapple; 6.8l 168hp; Tires 50%; New Rebuilt Engine & Transmission W/ 4,000 Hrs; Frame Hours - 31,000; 3rd Valve; 3rdvalve; Spare Log Grapple
Cat 966D Wheel Loader, EROPS w/ Weldco 9' Bucket; Rebuilt Transmission w/ 100 Hrs; New Pins, Bushings, Etc.; 51,968 Frame Hours; Tire Size: 25.6.25; Tires 50%; 3rd Valve
Cat IT18 Wheel Tool Carrier; EROPS, Bucket; S/N 6Zf005623; Short Block Overhauled in 2016; Rebuilt By Finning; 6,184 Engine Hrs; 50,309 Frame Hrs; Tire Cond. 70%; 3rd Valve; Spare Tire
Cat 930 Wheel Loader; EROPS, S/N 41K2810; 6,184 Hrs; New Brakes; Rarely Used (Standby Unit); QC Attachment For Both 930 & IT18 Sold Separately; 3rd Valve
Cat 950F 26,000LB Forklift; S/N 55K00490; New Display Panel; Tire Size F-235R25; Tire Cond. 70%; Tire Size R2353 25; Tires 80%; 3rd Valve; 1,937 Hrs Showing
Cat 950C Wheel Loader, w/ Forks; S/N 31K1951; Engine Overhauled In Fall 2016, w/ 390 Hrs; Tires 80%
Daewoo Mega 250 III Wheel Loader, S/N 1016; Oaeolis 20.5R25 Tires; Running Machine; Needs New Rear Differential; Spare Tire
Cat 140G Grader, S/N 08Z70294; 14,564 Hrs; Bottom & Wing Blades; Perkins 6 Cylinder Engine; 157-165 BHP; 560 Hours; Pump Controls
2013 John Deere 318D Skid Steer; w/ 6' Bucket & Pallet Forks; S/N IT0318DAADG238766; Tires 80% Rear, 40% Front; 3,909 Hrs
’97 Case 95XT Skid Steer
2007 Ford F-550 Diesel Welding Truck, Powerstroke Turbo Diesel; w/ Miller Gas Welder; Compressor & Deck Crane; Side Cabinets
2005 Kenworth 849 Coastal Log Truck, Cat 3406 engine; Clark 90,000LB rear planetary; w/ 2006 Hood 182 Log Picker & 2016 Hultdins SG520S Super Grip 8,000KG Grapple; 2 Stage Pump w/ oil cooler on picker; Tires: 14.00 R25.
Hyundai 320 Butt’n Top, w/ Waycon Rear Entry Cab; W/ Log Grapple; Cracked Weld On Turret
Steiger Cougar Log Hauler Tractor
Cat 950 Wheel Loader, For Parts; Weldco Beales QC 9’ Bucket; Cat Engine; Michelin 20.5R25 Tires; Spare Tire
16’ Tandem Axle Trailer, 3,500lb Axle
Hahn Harvester, W/ Serco 125 Head; John Deere 6 Cylinder Engine; All Hydraulic;
Gmc 2500 Crew Cab Bush Truck, Leather, Auto
2006 Ford F550 Service Truck, W/ Deck; Metal Deck Storage Cabinets, Miller Bobcat 225 Amp Portable Welder; 11,000 Watt Generator; Gas Powered Compressor; 161,000 Km
Atco 10’ X 20’ Modular Office Unit
Grapple For Cat It18 Or 930 Loader
Spare Grapple For Cat 955 Loader
Weldo Beales Grapple For Daiwoo Loader
Weldco Beales Bucket For Daiwoo Loader
Log Trailers

JOHN DEERE 644J WHEEL LOADER

'94 CAT 140G GRADER (2)

'94 CAT 140G GRADER

CAT 966D WHEEL LOADER

'92 CAT IT18 TOOL CARRIER

CAT 930 WHEEL LOADER

CAT 950C WHEEL LOADER, FORKLIFT

'93 CAT 26,000LB FORKLIFT

2013 JOHN DEERE 318D SKID STEER

CASE 75XT SKID STEER

KENWORTH / HOOD 182 PICKER TRUCK

STEIGER COUGAR TRACTOR

WAYCON BUTT-N-TOP

DAIWOO MEGA 253 III WHEEL LOADER

HAHN HARVESTER, SERCO 125 HEAD

CAT 950 PARTS LOADER

FORD F550 SERVICE TRUCK

TANDEM AXLE UTILITY TRAILER

(2) FUEL TANKS ON STAND

CAT 966 BUCKET

LOG GRAPPLE

GRAPPLE

LOADER BUCKET

LOGGING TRUCK BUNK

SNOW BLADE

(2) WATER TANK TRAILERS

ATCO 10' X 20' OFFICE UNIT

LOADER CLEANOUT ATTACH

MILL LAND & BUILDINGS

PARCEL 1: MAIN MILL PROPERTY

Property is located in Fort Assiniboine, Alberta, approximately 1.5 hours from Edmonton, about 10 Km’s north on Hwy 33 towards Swan Hills.

Mill land and principal buildings are offered prior to auction as part of the mill or as a separate package in the auction, with the high bid subject to owner approval.

Land

Legal Description: SE ½ 35-62-6-W5M 61028 TWP RD 625, Fort Assiniboine, Alberta

76 Acres, including 2+ acres of paved yard
No soil contamination in history of site.

Main Mill Building

22,593 sq ft on ground level;
9,625 sq ft upper level sawmill portion;
12’6” from ground to upper floor, 11’ from upper floor to ceiling;
Lean-to Wing on Main Mill, 24’ x 80’; sloped ceiling, 23’ – 26’H;
3 Phase power – 1,500KVA Transformer;
2000 Amp Main Breaker, w/ MCC’s (600V & 480V Transformers);
1.5 Million BTU boiler & pumps;
(2) Lennox Furnaces;
Hot water tank;
150’ Well (potable water);
Septic tank, shared with office building;

Sorter Building

30’ x 180’ Section x 28’ to ceiling
Cold storage wing of sorter building, 17-1/2’ concrete to ceiling

Shop Building

3,000 sq ft wood frame w/ metal cladding construction;
17’6” ceiling height;
(2) Shop Doors, 16’H x 14’W & 16’ x 16’;
Man Door;
Ingersoll-Rand Shop Compressor, 5HP;
Gantry crane covers half the building. Certified for 5 Tonne but operated at 2 Tonne

PARCEL 2 – 173 ACRES CLEARED & FORESTED LAND

Legal Description: N.W. ¼ SEC.25 – TWP.63 – RGE.6 – W5M

Address: 65063 RGE RD 65, WOODLANDS COUNTY, FT. ASSINIBOINE, AB (NORTH FORK/TIMEU AREA)

121 ACRES PRODUCTIVE PASTURE
METAL CLAD WAREHOUSE
REMOVABLE OFFICE BUILDING

NOTE: HIGH BIDS SUBJECT TO OWNER APPROVAL FOR BOTH PROPERTIES, BELOW MINIMUM BIDS ON EACH PARCEL

MILL & SORTER BUILDINGS

TRUCK SHOP BUILDING & CONCRETE YARD

LOG INFEED & CONCRETE YARD AREA

LOG OFFICE-HOME BUILDING

LOG MILL BUILDING

LOG OFFICE BUILDING, SIDE VIEW

OFFICE BUILDING INTERIOR

LOG MILL BUILDING VIEW FROM LOFT

LOG OFFICE LOFT

LOG OFFICE BUILDING CENTRE POLE

SHOP BUILDING

SORTER BUILDING

MILL BUILDING & EDLF LEAN-TO

SAWMILL MACHINERY

LOG SLASHER LINE

5 STRAND HD LOG INFEED DECK; 20' X 35'; W/ DRIVE
50' LOG INFEED TROUGH
60" SLASHER SAW, 30HP
180' LOG SORT OUTFEED CHAIN CONVEYOR, W/ (6) HYDRAULIC PUSH-OFFS
OUTFEED WASTE CONVEYOR, 12" X 18'; W/ DRIVE
INSULATED OPERATOR CONTROL BOOTH W/ ELECTRICS & CONTROLS; 2004 PRO LOGIC PL
TWIN 25HP HYDRAULIC POWER UNIT

(2) CAMBIO DEBARKER LINES

CAMBIO 30" SINGLE RING DEBARKER
6 STRAND LOG INFEED INCLINE TRANSFER, 19' X 13'H
SM-CYCLO DRIVE
LOG STEP FEED, 19'W X 8'H; W/ DRIVE
BOX CHAIN LOG INFEED, 9" X 48'; DRIVE
OUTFEED ANTI-VIBRATION TUBE, 34" X 124"; SAND FILLED HOLLOW STEEL
BOX CHAIN LOG OUTFEED; 13" X 60'; DRIVE
CAMBIO 18" RING DEBARKER, MODEL CA US; S/N 68748
SPARE CAMBIO 18” DEBARKER FEED ROLLS
OUTFEED ANTI-VIBRATION TUBE, 23" X 129"L; SAND FILLED HOLLOW STEEL
BOX CHAIN OUTFEED CONVEYOR, 7" X 38'; 5HP
6 STRAND LOG DECK, 18'6" X 18'
SM-CYCLO 43170 DRIVE
6 STRAND LOG INCLINE TRANSFER, 18'6" X 11'6"; DRIVE

75HP CHIPPER DRIVE

HOG LINE FROM DEBARKER

13" X 45' BOX CHAIN WASTE INFEED CONVEYOR; DRIVE
NICHOLSON STRAIGHT KNIFE CHIPPER, 26 X 6 SCH CH; S/N 6746; 75HP 575V 1775 RPM
REBUILT RAWLINGS P9Z HAMMER HOG, 36” x 32-1/2”; COMPLETELY REBUILT IN 2017; NEW WEAR PLATES ON ANVIL, BUSHINGS, SCREEN, MAIN HINGE PINS REBORED; NEW CURRENT HAMMERS W/ REPLACEABLE INSERT CUTTERS; FACTORY REBUILT 250HP 600V DRIVE; HYDRAULIC CLAM OPENING
NEW 250HP HOG SOFT START (FOR RAWLINGS)
SPOOL OF COPPER TECK CABLE FOR RAWLINGS HOG INSTALLATION
INCLINE BOX CHAIN TO BIN; 14" X 116'; DRIVE
PEERLESS 24 UNIT CHIP BIN, CLAMSHELL
5HP HYDRAULIC POWER UNIT

NICHOLSON STRAIGHT KNIFE HOG CHIPPER

RAWLINGS REBUILT P9Z, 36'' x 32-1/2''

HOG FUEL CONVEYOR & BIN

HOG FUEL INCLINE CONVEYOR & BIN

HEWSAW SMALL LOG PROCESSOR LINE

1996 HEWSAW R200 SMALL LOG PROCESSOR, COMPLETE HYDRAULICS, PLC, VALU-SCAN SCANNER (LIGHT CURTAIN); (5) DRIVES: (2) UPPER VERT. – 150HP 3,500RPM; (2) HOR 125HP 3,500RPM; 100HP BOTTOM DRIVE; PROGRAMMING UPDATED IN 2000'S; ALL SAW DRIVES 3,500RPM; 3" - 13" LOG CAPACITY; PAID $1,300,000 NEW
HEWSAW BANANA INFEED, 16" X 21'
VALUSCAN KMTR 24" X 1-1/4" BBIM; LIGHT CURTAIN SCANNER; MODEL 42560-0240
24' HEWSAW INFEED, W/ (3) HYDRAULIC KICKERS; SM-CYCLO 7.5HP
LOG INFEED BELT, 16" X 38'3"; W/ DRIVE
HEWSAW OUTFEED BELT, 14" X 10', SPRING MOUNTED; 5HP
4 STRAND HEWSAW OUTFEED CHAIN TRANSFER, 11' X 32'; H78B CHAIN; SM-CYCLO 5HP
BELT CONVEYOR, 12" X 68' 5"; 7.5HP MOTOR & REDUCER
ALLEN-BRADLEY SINGLE SECTION MCC; BUL2100
HEWSAW ARBOR SWITCHES; (3) 100; (1) 60 & (13) 30 AMP SWITCHES

HEWSAW INFEED

HEWSAW SCANNER

HEWSAW SCANNER 2

HEWSAW SCANNER SYSTEM

HEWSAW INFEED W KICKERS

HEWSAW KICKERS

HEWSAW INFEED CONVEYOR

HEWSAW INFEED CONVEYOR 2

HEWSAW R200 BANANA INFEED

BANANA INFEED CLOSE-UP

HEWSAW BANANA INFEED

HEWSAW BANANA INFEED, REAR VIEW

HEWSAW INFEED & SCANNER

HEWSAW R200 SMALL LOG PROCESSOR

HEWSAW & INFEED

HEWSAW SCISSOR LIFT OUTFEED

SCISSOR LIFT OUTFEED

HEWSAW OUTFEED TRANSFER

HEWSAW OUTFEED BELT TO TRIMMER

HEWSAW CONTROL ROOM

HEWSAW PLC

HEWSAW CONTROLS

HEWSAW ELECTRICAL

HEWSAW CONTROLS

END DOGGING LOG FEED ”EDLF” CHIPPING CANTER SYSTEM

INFEED LINE FROM CAMBIO 30" DEBARKER
BELT CONVEYOR, 30" X 21'6"
BELT CONVEYOR, 30" X 74'; 5HP DRIVE
WHIRLY BIRD LOG KICKER, 18'6" X 6' ARMS, W/ 3HP 575V DRIVE
4 STRAND TRANSFER DECK, 11'3" X 13'; 5HP MOTOR & GORDON RUSSELL 28.27:1 REDUCER
MCDONOUGH END DOGGER LOG FEED (EDLF) CANT EDGER; 28" DIAMETER, 2 CUT SYSTEM; (2) 100HP CHIPPING HEADS; (4) 75HP SAW DRIVES (LEFT & RIGHT CANT SAWS; LEFT & RIGHT SLABBER SAWS; 1750RPM 575V; PLC, HYDRAULICS; TOP RAIL W/ CUSTOM 4" LIFT, INCREASING CAPACITY TO 28" FROM NORMAL 24"; 22' SPLINED INFEED POSITIONING ROLLS; AUTO LUBE SYSTEM; BOUGHT IN 2001
SPARE KEY KNIFE CHIPPING HEADS; END DOGGER LOG FEEDER; GUIDES FOR EDLF LINE (ALL IN HEWSAW GRINDING ROOM); 1-1/4", 22MM & 2" COLLARS
LEFT BAND SAW, RIGHT BAND SAW; LEFT SLABBER, RIGHT SLABBER; LAND EAST REFURBISHED & NEW SAW BOX
EDLF OUTFEED SPLIT SPIRAL ROLLCASE, 36" X 22'L; (4) SPIRAL ROLLS
ALLEN-BRADLEY 5 SECTION MCC; BUL2100; 1200 AMP HOR; 300 AMP VERT; 14 SWITCHES
5 STRAND TRANSFER DECK, 13W' X 25'L; W/ (5) 10" X 64" EVEN ENDING ROLLS; DRIVE
EDLF CONTROL ROOM, PLC PANELS (OKANAGAN AUTOMATION); CONTROL CONSOLE; PANELVIEW PLUS 1000 MONITOR, (2) FOOT PEDALS
(4) 42" JUMP CHAINS
4 STRAND INCLINE TRANSFER, 16' X 10'9"; SM-CYCLO 5HP DRIVE

MCDONOUGH EDLF INFEED BELT FROM CAMBIO 30''

EDLF INFEED SCANNER

TRANSFER FROM HEWSAW INFEED TO EDLF INFEED

EDLF LINE TRANSFER

WHIRLEY BIRD LOG KICKER

4 STRAND LOG INFEED TRANSFER

MCDONOUGH END DOGGER LOG FEED CANT EDGER

(5) EDLF CANT & SLABBER SAWS

1 OF 2 EDLF 100HP CHIPPING HEADS

MCDONOUGH EDLF POSITIONING ROLLS

EDLF POSITIONING ROLLS

EDLF POSITIONING ROLLS & INFEED TRANSFER

MCDONOUGH EDLF OUTFEED ROLLS

EDLF SPLIT SPIRAL ROLLS

45 STRAND EDLF OUTFEED TRANSFER & ROLLS

(4) 42'' JUMP CHAINS

4 STRAND INCLINE TRANSFER

4 STRAND TRANSFER BELOW JUMP CHAINS

2 OF 4 75HP DRIVES

MCDONOUGH EDLF CONTROL & PLC

EDLF PLC

EDLF OPERATOR CONSOLE

CONTROL BOOTH W AB READOUT & MONITOR

MCC & ELETRICAL

MILL TECK

CARDINAL BOARD EDGER LINE

4 STRAND TRANSFER DECK, 22'6"L X 11'1"W; DRIVE
CARDINAL EDGER INFEED ROLLCASE, 29" X 9'5"L; W/ DRIVE
CARDINAL 2 POCKET SHIFTING SAW BOARD EDGER; 3" X 30"; 40HP; (1) STATIONARY POCKET, (1) SHIFTING POCKET; S/N 696-B; 23MM COLLARS, 2" COLLARS; SPLINTER BARS
CARDINAL 21' EDGER OUTFEED ROLLCASE, (7) HOLDDOWN ROLLS
4 STRAND WASTE TRANSFER, 11'4" X 13'5"; H78B CHAIN; W/ 36" X 13.5' BELT CONVEYOR; DRIVE
POWER FIST 880LB ELECTRIC HOIST

CARDINAL 2 POCKET BOARD EDGER

CARDINAL 2 POCKET SHIFTING BOARD EDGER

CARDINAL 21' EDGER OUTFEED ROLLS

CARDINAL BOARD EDGER & OUTFEED (2)

CARDINAL BOARD EDGER OUTFEED HOLD DOWN ROLLS

CARDINAL EDGER OUTFEED ROLLS

EDGER OUTFEED ROLLS

CARDINAL EDGER OUTFEED ROLLS

BELT-CHAIN TRANSFER BELOW OUTFEED

CARDINAL EDGER INFEED TRANSFER

CARDINAL EDGER INFEED ROLLS

CARDINAL OPERATOR CONSOLE

NEWNES MCGEHEE 6" CURVE SAW CANT EDGER PACKAGE

NEWNES MCGEHEE 6” CURVE SAW EDGER; INSTALLED IN 2014; DRIVE PLUS SPARE; ORIGINAL 200HP CHIPPING DRIVES REPLACED W/ 75HP; (200HP DRIVES IN ON-SITE STORAGE); VALUED AT $100,000 PURCHASE; SET FOR STATIONARY; ALL PIECES ON-SITE FOR CURVE SAW; VARIABLE SPEED; INTENTIONALLY FEEDS SLOWER THAN CAPACITY; 260FPM DOWN FROM 400FPM ON SMALLER 6" CANTS; MAX 6" X 26" CAP; STATIONARY FOR STRAIGHT SAWING, 35" OUTFEED ROLLS; NO SLABS, ALL CLEAN LUMBER
NEW TS MFG. INFEED ROLLCASE INFEED SYSTEM; W/ PIN POSITIONER; 7' X 12'6"; (4) CROSS CHAINS; (4) 31" ROLLS; LASER GUIDES; PINCH POINT; 4 STRAND INCLINE TRANSFER, 6'L X 12.5'W TO MCGEHEE CURVE SAW EDGER, (4) SHAFTS, TOP & BOTTOM & (2) S-DRIVE
TOUCH SCREEN FOR SIZE; OFFSET CALIBRATION; CHIPPING HEAD FOLLOWS SAWS IN CLUSTER
COMPLETELY AUTOMATIC; JAM-FREE INFEED SYSTEM
CONTROL BOOTH W/ EDGER SETWORKS, CONTROLS, OPERATOR CHAIR, ETC. (AE AUTOMATION)
CANT EDGER OUTFEED ROLLCASE, 11.5" X 35.5", W/ 34" X 11.5' BELT CONVEYOR
5 STRAND LANDING DECK, 15' X 35'-6"; H78B CHAIN; 5HP DRIVE
BELT CONVEYOR, 14" X 24'; 5HP DRIVE
NEW SECONDARY UNSCRAMBLER INFEED TO MILL (INCOMPLETE)
(2) SQUARE D 60 AMP SWITCHES

NEWNES MCGEHEE 6'' X 26'' CANT EDGER

NEWNES MCGEHEE CANT EDGER

NEWNES MCGEHEE CANT EDGER & TS MFG

NEW 2017 TS MFG

TS MFG

NEWNES MCGEHEE EDGER OUTFEED ROLLS

400HP MAIN CANT EDGER DRIVE

CONTROL BOOTH & CONTROLS

CANT EDGER LASER LIGHTS

NEWNES LUMBER SORTER SYSTEM

7 STRAND BAR TYPE UNSCRAMBLER, 15'W X 4'2"H
7 STRAND LANDING TABLE, 44"L X 14'W; DRIVE
DOUBLE END PRECISION TRIMMER; 6 STRAND LUGGED TRIM TABLE TRANSFER; 16' X 25'L; (6) 48" & (1) 72" EVEN ENDING ROLLS; 3500 RPM ARBOR MOTORS
OKANAGAN AUTOMATION LUMINESCENT MARKER GRADE SCAN SYSTEM; RUNS EITHER THICKNESS SHOE ON TEMPOSONICS OR LASER EYES FOR ENCODER
4 DOUBLE STRAND INCLINE TRANSFER TO SORTER, 16' X 12'; DRIVE
NEWNES 25 BIN 16' J-BAR LUMBER SORTER, W/ PLC; WINTALLY SYSTEM, UPGRADED BY WYOMING TECH, AND MAINTAINED BY OKANAGAN AUTOMATION
42" BIN CENTRES; TOTAL LENGTH: 109'; INCL. (1) REJECT BIN; (4) WESTERN PROGRAMMING CONTROL CONSOLES; CONTROLS ARE DEVICE MET FOR STACKER
4 STRAND SORTER TRANSFER; (3) SECTIONS, TOTALLING 12' X 96'
7.5HP MOTOR, W/ PLANETGEAR 3.78:1 REDUCER; 575V
SM-CYCLO H88Y 43:1 10HP DRIVE; 230/460V
5HP MOTOR & RADICON 40:1 REDUCER; 230/460V

4 STRAND TRANSFER DECK, 15' X 35'6''

7 STRAND BAR UNSCRAMBLER

7 STRAND LANDING TABLE

DOUBLE END PRECISION TRIM TABLE

TRIM TABLE EVEN ENDING ROLLS

SECONDARY TRIM TABLE INFEED UNSCRAMBLER

SECONDARY INFEED TO TRIM TABLE

NEWNES J-BAR SORTER INFEED

GRADE MARKER SCAN SYSTEM

NEWNES 25 BIN J-BAR SORTER

NEWNES 25 BIN J-BAR LUMBER SORTER

NEWNES 25 BIN J-BAR SORTER

GRADE SCANNER SYSTEM

BOTTOM CHAIN TRANSFER CONTROL

4 STRAND SORTER TRANSFER, 12' X 96'

10HP SM-CYCL0 DRIVE

NEWNES LUMBER STACKER LINE

4 STRAND INCLINE CHAIN TRANSFER, 11.5' X 15'; 10HP MOTOR & RADICON REDUCER
DOUBLE BAR 5 STRAND UNCSRAMBLER, 18'W X 9'8"H; W/ DRIVE
NEWNES 16' X 5' LUMBER STACKER; 4 ARM; HYDRAULICS, DRIVES, PLC; CONTROLS ARE DEVICE MET; ALL ELECTRIC; HYDRAULIC UNIT FOR STICK PLACING & AIR PACKAGE FOR DOGS; BOXING FORKS ON-SITE, REMOVED THEM FOR HEADROOM)
16' X 21' 5 STRAND TOP INFEED; 90" SIDE FENCE
NEWNES 16 CARTRIDGE AUTO STICK PLACER
4 STRAND PACKAGE OUTFEED TRANSFER, 11.5' X 28'L; W/ PACKAGE MOVE ARMS; SM-CYCLO 7.5HP
DEL SCHNEIDER 20HP HYDRAULIC POWER UNIT
2 STRAND INFEED TRANSFER, 46" X 45'L; W/ DRIVE
CUTLER-HAMMER 60 AMP SWITCH; (2) SQUARE D 30 AMP SWITCHES

4 STRAND INCLINE TRANSFER

10 STRAND BAR TYPE UNSCRAMBLER

NEWNES 16' X 5' LUMBER STACKER

5 STRAND TOP STACKER TRANSFER

NEWNES 16 CARTRIDGE AUTO STICK PLACER

4 STRAND PACKAGE OUTFEED TRANSFER

PACKAGE OUTFEED TRANSFER

STICK CART TRANSFER

STICK LOADING STATION

STACKER PLC

STACKER OPERATOR CONTROL

DEL SCHNEIDER 20HP STACKER HPU

WASTE CONVEYORS

MAIN WASTE CONVEYOR, FLYTED LONG LINK CHAIN; 16" X 210'L; 10HP 575V DRIVE
MAIN WASTE BELT CONVEYOR, 18" X 90'; W/ METAL SHARK METAL DETECTOR & FIBERGLASS SECTION; 1919-10-24; 10HP DRIVE
TROUGHED WASTE BELT CONVEYOR TO CHIPPER, 30" X 235'L; SM-CYCLO 20HP DRIVE; 120’ INSIDE, 115’ OUTSIDE MILL BUILDING, W/ CORROGATED METAL HALF ROUND COVER; SM-CYCLO 20HP DRIVE
TRIM BLOCK WASTE CONVEYOR, 12" X 26'; 5HP MOTOR & BROOK HANSEN H-88-Y REDUCER 575V
BOX CHAIN WASTE CONVEYOR FROM MCDONOUGH CANTER TO MAIN WASTE CONVEYOR; 10" X 45'; SM-CYCLO 7.5HP DRIVE
BOX CHAIN WASTE CONVEYOR, 10" X 42'; 7.5HP MOTOR & RADICON REDUCER
BOX CHAIN WASTE CONVEYOR, 10” X 20’; 5HP MOTOR & REXNORD REDUCER, 575V

HEWSAW PLC ROOM

ALLEN-BRADLEY BUL2100 4 SECTION MCC; (18) SWITCHES (SORTER)
MARCUS 45 KVA TRANSFORMER, 600-480/440V
PLC & VFD CABINET: (3) VFD'S FOR STACKER, HOIST, FORKS, BOXING FORKS
WESTERN INDUSTRIAL SORTER PLC & COMPUTER
CAE NEWNES 60HP HYDRAULIC POWER UNIT, 460V
CAE SPARE HYDRAULIC RESERVOIR
WELLMATE WATER SYSTEM
DEWALT COLD CUT SAW
65" SAW BLADE

GENERAL

LM PACKAGE CUT-OFF SAW; MODEL 100MP-7-5S; 10HP; S/N 44302
(2) FROMM P325 BATTERY POWERED STRAPPERS, W/ LITHIUM BATTERIES
FROMM P329 BATTERY POWERED STRAPPER, W/ LITHIUM BATTERIES
FROMM HAND STRAPPING TOOLS
INSULATED METAL BUILDING, 105" X 94", FAN, LIGHTING, POWER
LUNCHROOM, LOCKERS, TABLES, VENDING MACHINES, MICROWAVES
ASSORTED RADIOS, ETC.

LM 100MP-7-5S PACKAGE SAW

TARPING STATION

FROMME POWER & AIR STRAPPERS

FROMME HAND STRAPPERS

HYDRAULIC POWER UNIT

NUMEROUS CARTS

DOUBLE HYDRAULIC POWER UNIT

HYDRAULIC POWER UNIT

AUTO LUBE SYSTEM

INSULATED METAL TRANSFORMER ROOM

LUNCH ROOM LOCKERS, TABLES, CHAIRS

LUNCH ROOM VENDING MACHINE

NUMEROUS CARTS

EST 6616 FIRE ALARM CONTROL

STEEL FORKLIFT DUMP BIN

POWER HOIST

SPARE 60'' SLASHER SAW BLADE

NUMEROUS PIKES

OVERHEAD JIB HOIST

SURE FLAME SPACE HEATER

WASTE BURNER

MAIN ELECTRICAL ROOM

SIEMENS 8PX3 15 SECTION MCC; 58 SWITCHES, MAIN 2000 AMP SWITCH, 1200 AMP SWITCH + (58) SWITCHES; METERING SECTION
ALLEN-BRADLEY BUL2100 4 SECTION MCC; 9 SWITCHES; (HEWSAW)
SIEMENS 2 SECTION MCC, 6 SWITCHES
ELECTROTEK AUTO POWER FACTOR CORRECTION UNIT, 600V; S/N 12-19793-01; 900 KVAR; ESTAMET PFC-N DIGITAL CONTROLLER
(2) BENSHAW 150HP SOLID STATE SOFT STARTS; MODEL RS7-150-5-12 & RS7-150-5-1
(2) BENSHAW 125HP SOLID STATE SOFT STARTS; MODEL RS6-125-5-12
(2) BENSHAW 100HP SOLID STATE SOFT STARTS; MODEL RS6-100-5-12
REX 225KVA TRANSFORMER, 600-480V
MAGNATEK 75 KVA TRANSFORMER, 480V - 208/120V
MARCUS 45KVA TRANSFORMER, 600-480/440V 3PH.
SQUARE D 30KVA TRANSFORMER, 600V – 208/128V 3PH.
SQUARE D 25 KVA TRANSFORMER; 240 X 480H - 120/240V
(2) ALLEN-BRADLEY 1336 VARIABLE FREQUENCY DRIVES
(2) RELIANCE 6U3000/SB VARIABLE FREQUENCY DRIVES, 10HP; (UNINSTALLED)
ASSORTED FUSES, ETC.

MORE ELECTRICS (ALSO LISTED WITH PRODUCTION LINES)

ALLEN-BRADLEY CENTERLINE 6 SECTION MCC; 15 SWITCHES
ALLEN-BRADLEY 3 SECTION MCC; BUL2100; 1200 AMP HOR; 300 AMP VERT; (9) SWITCHES; W/ ALLEN-BRADLEY VFD CABINET FOR HEWSAW
ALLEN-BRADLEY 2 SECTION MCC; BUL2100; 1200 AMP HOR; 300 AMP VERT; (6) SWITCHES
ALLEN-BRADLEY BUL2100 4 SECTION MCC; (18) SWITCHES (SORTER)
ALLEN-BRADLEY SINGLE SECTION MCC; BUL2100; HEWSAW ARBOR SWITCHES; (3) 100; (1) 60 & (13) 30 AMP SWITCHES
ALLEN-BRADLEY SOFT START & CABINET; FOR MCGEHEE CURVE SAW EDGER FEEDWORKS
MAIN MILL SITE 1500 KVA TRANSFORMER
REX 750 KVA TRANSFORMER, 600 – 480V
MARCUS 45 KVA TRANSFORMER, 600-480/440V
SQUARE D 30 ANN KVA TRANSFORMER; 480-208/120V
SQUARE D 400 AMP MAIN SWITCH
(2) SQUARE D 60 AMP SWITCHES
CUTLER-HAMMER 60 AMP SWITCH; (2) SQUARE D 30 AMP SWITCHES
30 AMP SWITCH

MAIN MILL SITE TRANSORMER

REX 750KVA TRANSFORMER

REX 225KVA TRANFORMER

SQUARE D TRANSFORMER

MARCUS 45KVA TRANSFORMER

MAGNATEK 75KVA TRANSFORMER

SQUARE D 25KVA TRANFORMER

ELECTROTEK AUTO POWER FACTOR CORRECTOR

(2) BENSHAW 150HP SOFT STARTS

(2 OF 4) BENSHAW 100HP SOFT STARTS

(1 OF 2) ALLEN BRADLEY 1336 VFD'S

SQUARE D 400 AMP SWITCH

MISC ELECTRICS

WESTERN INDUSTRIAL UMBER METER

OPERATOR CONSOLE

MISC ELECTRICS

CHIPPING & SAWDUST SYSTEMS

BLACK CLAWSON 6" SLANT DISC CHIPPER; 250HP 600V DRIVE; W/ TECTRONIX SHARK METAL DETECTOR SECTION ON INFEED BELT, W/ CONTROL
INCLINE BOX CHAIN CONVEYOR TO SCREEN, 16" X 36'; MOTOR & REDUCER
BM&M 8' X 16' CHIP SCREEN; MODEL 8 X 16 ID; S/N 8616
INCLINE CHEVRON BELT CONVEYOR FROM BELOW SCREEN BACK TO CHIPPER; 12" X 51'
DOUBLE CONVEYOR SYSTEM TO CHIP BINS; 36" X 200' CHEVRON CHIP BELT CONVEYOR ON ROLLERS; 11" X 200' BOX CHAIN; W/ FULL LENGTH CATWALK, SUPPORTS, ETC.
PEERLESS 20 UNIT SAWDUST BIN
PEERLESS 20 UNIT CHIP BIN
PEERLESS 30 UNIT CHIP BIN
HYDRAULIC POWER UNIT
CROSS BIN CONVEYOR BELT, 12: X 30'
LOAD TARPING STATION
RAWLINGS P9Z HOG, COMPLETELY REBUILT IN 2017; NEW WEAR PLATES ON ANVIL, BUSHINGS, SCREEN, MAIN HINGE PINS REBORED; NEW CURRENT HAMMERS W/ REPLACEABLE INSERT CUTTERS; FACTORY REBUILT 250HP 600V DRIVE; HYDRAULIC CLAM OPENING

Note: Bin Conveyors offered separately and combined.

UNINSTALLED EQUIPMENT

Rawlings P9Z Hog, Completely Rebuilt In 2017; New Wear Plates On Anvil, Bushings, Screen, Main Hinge Pins Rebored; New Current Hammers, w/ Replaceable Insert Cutters; Factory Rebuilt 250HP 600V Drive; Hydraulic Clam Opening
CAE 25" X 32' Conveyor Trough & End Roll; w/ Fiberglas Magnet Section; 5HP Drive & Browning Gear Drive
Linden Double Action Step Feeder, 12'h X 18'w; SM-Cyclo 10HP Drive
Lm Package Cut-Off Saw; Model 100MP-7-5S; 10HP; S/N 44302
New 2011 Optimil Edem 30’ Vibrating Conveyor, w/ Magnetic Section, Drives
Newnes 24' 10 Strand Trimmer
QM 20’ Enclosed Trim Saw, 10 Saw Stations w/ cylinders
Hazeldine J-92 Notcher; S/N 0392037; w/ unscrambler
Newnes 16' 5 Arm Lumber Stacker Box Chain Conveyor, 16' X 40'; SM-Cyclo 5HP
Hydraulic 10’ Package Squeeze, Portable w/ lifting hooks
12' Tilt Hoist W/ Rollcase; 5' Packages
Allied Tandem Blowers, Rated for 50HP drive
CAE 6 Knife 60” Chipper, no drive
Twin 50HP Hydraulic Power Unit, 575V
Allied Twin Blower System
24' Transfer
Cambio 18” Debarker Feed Rolls
4” Metal Detection Slabs For Fines Conveyors

RAWLINGS REBUILT P9Z 36

RAWLINGS REBUILT P9Z 250HP HOG

LINDEN DOUBLE ACTION STEP FEEDER

54'' CHIPPER

BOX CHAIN CONVEYOR, 16'' X 40'

CAE CHEVRON BELT CONVEYOR, 25'' X 32'

4 ARM X 12' TILT HOIST

TILT HOIST INFEED POWER ROLLCASE

NEWNES TRIM SAW

NEWNES 24' TRIM SAW INFEED

NEWNES TRIM SAWS

QM 24' TRIM SAW

NEWNES 16' 5 ARM LUMBER STACKER

HAZELDINE J-92 NOTCHER

HAZELDINE NOTCHER UNSCRAMBLER

TWIN 50HP HPU

19 -ALLIED TWIN BLOWER SYSTEM

CAMBIO 18'' DEBARKER INFEED SYSTEM

FILING ROOM

WRIGHT W-150HD-B TOP & FACE GRINDER (DALTECH 512M)
WRIGHT W-350 AUTO DUAL SIDE GRINDER; (DALTECH 560M)
WRIGHT W-725 STROBE GRINDER; TOP & FACE
WRIGHT 150HD GRINDER, S/N F9321; TOP, FACE & V-NOTCH
REFORM AR13 FLAT KNIFE GRINDER, TYPE L; S/N 3928 88
GM&E BENT KNIFE GRINDER, MODEL 41; S/N 70
MICROCUT BM-200E MULTI-PURPOSE SHARPENER
HEWSAW HEAD GRINDER, MODEL P953693
WILLIAMS & WHITE 36DF STRETCHER ROLL; S/N 36353
MCDONOUGH EDGER ARBOR GRINDER
VALLEY MACHINE WORKS 2 HEAD GUIDE MILLING MACHINE
IMW 24055 GUIDE MILL
BABBITT POT SYSTEM, W/ POT, BENCH, HOOD FAN, ETC.
MILLER XMT 350 WELDER
STANDRIDGE 18” X 24” GRANITE SURFACE TABLE
(35) SPARE 20” CHIPPER KNIVES, ALL GOOD, SOME NEW
SAW BLADES FOR HEWSAW, EDLF CANTER, CARDINAL EDGER, MCDONOUGH CURVE SAW EDGER & SLASHER SAW
29" ANVIL TURNTABLE
(2) SMALL ANVILS
DOUBLE BENCH GRINDERS
HEWSAW & OTHER BEARINGS & PARTS
METRIC & STANDARD BOLTS & BINS
PROMAC PNEUMATIC BABBITT JIG CLAMP FOR MCGEHEE SAW GUIDES
SHOP BUILT GUIDE TOLERANCE CLAMP
TECOMEC FL136 CHAIN SAW SHARPENER
KEY KNIFE GRINDER
NEW SWITCHES, FUSES, ETC.
GRINDING ROOM EXTRACTION FAN & PIPING
ACME CIRCULAR SAW SHARPENERS
(2) BUCKETS OF COUGAR 707 COOLANT
Record NO. 6 VISE
FLARE PRESS
COMCO TIPPING TURNTABLE
OXY-ACETYLENE TORCH SET
GRINDER & VISE
BABBIT MILLING MACHINE
CARBIDE SAW TIPS, BRAISING ROD, (2) STARRETT DIAL INDICATORS

MILLER XMT300 WELDER

FIRE SUPPRESSION BUILDING

PUMP CONTROLS: CUTLER HAMMER FD100-12L-N-A-F-R2; 1PH 120V; 560 HOURS
PUMP SYSTEM W/ PERKINS 6 CYLINDER ENGINE; 157-165 BHP; 1792/2600 40 70334 U631890;

CUTLER HAMMER FD100-12L-N-A-F-R2 FIRE SYSTEM CONTROL

PERKINS 6 CYL

FIRE SYSTEM VALVES & PIPING

FIRE SYSTEM DIESEL TANK

PUMP VALVES

FIRE SUPPRESSION SYSTEM ELECTRICAL

ACME TRANSFORMER

FIRE SUPPRESSION BUILDING

COMPRESSORS

Atlas Copco GA75 Rotary Screw Compressor, 100HP
Curtis 100HP Rotary Screw Compressor, Model RS1000 AE-E25
Air Force HR500 Air Dryer; S/N 148209; 500 CFM, 150 PSI
Sullair LS12 50HP Compressor; 205 CFM
Sullair 1025 25HP Compressor; 105 CFM
40' Shipping/Storage Container (Compressor Building); Power, Light, Heat

ATLAS COPCO 75HP SCREW COMPRESSOR

CURTIS 100HP COMPRESSOR

AIR FORCE HR500 AIR DRYER

AIR RECEIVING TANK

MILL AIR RECEIVING TANK

COMPRESSOR BUILDING ELECTRICS

40' CONTAINER COMPRESSOR ROOM

SULLAIR 50HP COMPRESSOR

SULLAIR 25HP COMPRESSOR

SHOP TOOLS & EQUIPMENT

Dayco NP60 Auto Hydraulic Crimper, w/ dies
Horizontal Metal Cutting Band Saw
BT950 950 Watt Genset
OTC 25 Ton Hydraulic Shop Press, w/ power pack
King Portable 10" Table Saw
Delta 70-200C Floor Drill Press, w/ vise
Dewalt DW870 Friction Cut-Off Saw
Westward 5,500LB Pallet Jack, 60” Forks
Fire Spray Cans
Power Fist Air Hose Reel & Air Hose
(17) ¾ - 1.5 Ton Chain Hoists & Come-A-Longs
(15) Lifting Chains & Hooks
(3) Rolling Tool Chests
Milwaukee & Dewalt Cordless Drivers
Milwaukee 6230 Portable Metal Band Saw
(7) Dewalt & Makita Angle Grinders
Makita HD ½” Drill
Ridgid Threader Dies
Walter Grinding Discs & Wire Heads
Numerous Socket & Screwdriver Sets
(8) 2’ – 6’ Aluminum Levels
(6) Hydraulic Bottle Jacks To 20 Ton
(14) Grease Guns
(2) Power Fist Cordless 18V Grease Guns, (1 New In Case)
Allen Wrenches & Keys
Pry Bars
Pneumatic Chisel Gun Sets
Socket Sets
(18) Chicago Pneumatic Air Drivers To 1”
Power Fist 10/2 Amp 12v Battery Charger
Vehicle Battery Amp Meter
Hydraulic Accumulator Nitrogen Fill Kit
Hand Wrenches, Shears, Clamps, Etc.
Numerous Drill Bits
Marson 39001 Pop Riveter Kit
(14) Hex Socket Sets To ½”
Digital Calipers
Snap-On Screw Extractor Set, 25 Pce Hex Head
Proto Screw & Pipe Extractor Set
Proto Easy Out Kits
Mitutoyo Magnetic Base Height Gage
(2) Proto HD Snap Ring Plier Kits
Westward ¾” 21 Pce Socket Set
Snap-On 42 Pce Rethreading Set, Fractional & Metric
True Balance 21’ Multi-Function Ladder
Westward Twa38 Torque Wrench
(5) Assorted Torque Wrenches
(2) Swivel Head ½” Socket Wrenches
Socket Extensions
Proto HD 1” Socket Set To 3-5/8”
Set Of ¾” Sockets
Paulin Papco Cotter Pin, Spring Pin & Socket Set Screw Kits
Grota Electrical Terminal & Tool Kit
Snap Ring Kits
110 Pce Tap & Die Set
Dynaline Kits: Snap Ring, Woodruff Keys, External “E” Retainer Ring Assortment
Oetiker Welding Hose Repair Kit
Lot of Pikes
Dewalt Dw311 Reciprocating Saw
Power Fist 7-1/4” Metal Cutting Circular Saw
(3) Stihl Mse 220 Electric Chain Saws
(2) Husqvarna Chain Saws
HD Puller Set In Box
Welding Rod
Assorted Clamps & Pliers
Porta-Power Hydraulic Jack & Case
Porta-Power Hydraulic Pump & Case
Reamers & Cutters
Heaters
Work Lights
Dewalt Friction Chop Saw
Cases Of Delo Hd Moly 5% EPI Tubes & WD40
Dewalt DW871 Chop Saw
Louisville 4’ Aluminum Step Ladder
Allright 3’ Wooden Step Ladder
Featherlite 8’ Aluminum Step Ladders
EST 6616 Fire Alarm Control On Wall
(3) New “Exit” Signs In Box

DAYCO HYD. HOSE CRIMPER

METAL HOR. BAND SAW

MILLER XMT300 WELDER

PORTABLE TABLE SAW

OTC HYDRAULIC SHOP PRESS

PORTABLE HYDRAULIC PUMP

DELTA FLOOR DRILL

STEEL SHOP TABLE

(3) DEWALT DW870 FRICTION SAWS

NUMEROUS HOSE REELS

WESTWARD 5,500LB PALLET JACK

POWER FIST HOSE REEL & HOSE

15+ LIFT CHAINS & HOOKS

(17) CHAIN HOISTS

WESTWARD BENCH GRINDER

DOUBLE PEDESTAL GRINDER

(3) ROLLING TOO CHESTS

PORTA-POWER HYDL JACK SET & CASE

PORTA-POWER HYD

NUMEROUS PRY BARS

BOTTLE JACKS TO 20 TON

(2) POWER FIST CORDLESS 18V GREASE GUNS

(14) GREASE GUNS

ALLEN WRENCHES & KEYS

PARTS WASHER

PNEUMATIC CHISEL SET

NUMEROUS SOCKET SETS

(18) PNEUMATIC DRIVERS

POWER FIST BATTERY CHARGER

VEHICLE AMP METER

NUMEROUS PIPE & CRESCENT WRENCHES

NUMEROUS DRILL BITS

SURE FLAME SPACE HEATER

MARSON POP RIVETOR KIT

(14) HEX SOCKET SETS TO 12''

PULLER SET

HAND WRENCHES, SHEARS, CLAMPS

SOCKET & DRIVER SET

SNAP ON SCREW EXTRACTOR SET

PROTO SCREW & PIPE EXTRACTOR SET

PROTO EASY OUT KITS

MITUTOYO MAG BASE HEIGHT GAUGE

PROTO EASY OUT KITS

(2) PROTO HD SNAP RING PLIER KITS

WESTWARD SOCKET SETS

SNAP-ON RETHREADING SET

WESTWARD TORQUE WRENCH

NUMEROUS TORQUE WRENCHES

PAULIN COTTER PIN SETS

PAULIN SPRING PIN KITS

GROTA ELECTRICAL TERMINAL KIT

110 PCE TAP & DIE SET

MILWAUKEE & DEWALT CORDLESS DRIVERS

DEWALT & MAKITA ANGLE GRINDERS

MAKITA HD 12'' DRIVER

RIDGID PIPE THREADER & DIES

MILWAUKEE 6230 PORTABLE BAND SAW

WALTER GRINDING & WIRE DISCS

NUMEROUS SOCKET & SCREWDRIVER SETS

SOCKET SETS & EXTENDERS

HD SHOP SOCKETS TO 4''

ASSORTED LEVELS

LGE ASSORTMENT OF WRENCHES

HUSQVARNA CHAIN SAWS

(3) STIHL ELECTRIC CHAIN SAWS

DEWALT RECIPROCATING SAW

GARDEN TOOLS

POWER FIST METAL CIRC

HD PULLER SET

WOOD

TRUCK SHOP BUILDING

Hotsy Steam Pressure Washer
Ingersoll-Rand 5HP Compressor
Miller Bobcat Gas Welder
Easy Clean Pressure Washer; Kohler Command Pro 14HP
Parts, Tooling, Fittings
16” Bench Lathe/Mill/Drill; 110V
Copper Teck Cable On Spool
2 Ton Gantry Crane
Air & Oil Filters
Bulk Oil Tanks
Filter Cart
Floor & Transmission Jacks
(1.5) 115L Barrels VisionMax Group 9 Herbicide
Full Barrel Delo ELC 50/50 Antifreeze
Power Fist Mobile Hydraulic Pump
Double Elevated Fuel Tanks & Nozzles

INGERSOLL-RAND 5HP COMPRESSOR

HOTSY STEAM PRESSURE WASHER

EASY KLEEN PRESSURE WASHER

PORTABLE HYDRAUIC PUMP

NEW OIL TANKS 7 HOSE REELS

COMBO LATHE-MILL

AXLE JACK

PARTS WASHER

LUBE PUMP

BENCH DRILL PRESS

SPARE CYLINDERS

PARTS BINS & CONTENTS

BINS & FITTINGS

LOCKUP CAGE

TOOL CHESTS

TOOLS & CHESTS

TOOLS & SUPPLIES

SHELF UNIT & TRUCK PARTS

SPARE TIRES

SHELF UNIT & PARTS

AIR FILTERS & BELTS

SHOP BUILDING BOILER

SHOP CRANES

ASSORTED SHACKLES

BARREL OF DELO 50-50

INVENTORY

Bearings, Split Bearings, Pillow Blocks, Sheaves, Sprockets, Etc.
Hydraulic Cylinders & Drives, Ass’t Sizes
New Drive Chains
New Transfer Chain, Incl. (2) Diamond X-1470-010; (3) X-1334-010; X-1172-010
Victaulic Couplings
Iron & Metal Fittings, Water, Air, Hydraulic
Hydraulic Hose Dispenser & Assorted Hoses
Bolt Bins W/ Hyd. & Pneumatic Fittings
Approx. (40) Spare Motors, Reducers, Etc.;
(6) Debarker Rolls & Arbors
Bearings, Pillow Blocks, Sprockets, Sheaves, Etc.
Drive Belts
Bolt Bins