Home Mailing List Feedback Contact Us

PAST SALE

UNRESERVED PUBLIC AUCTION

Due to Closure of Manufacturing Division of

TYEE TIMBER PRODUCTS LTD.
Auction Date:  Thursday, April 14th, 2005 @ 10am
Preview Date:
 
 Wednesday, April 13th, 9am - 4pm
 (or by prior appointment contact Ken Ardiel at Tradewest for viewing arrangements at 604-551-9401 or kardiel@tradewestsales.com)
Location:  19822 - 101 Avenue, Langley, BC Canada

Lot by Lot Catalogue
Adobe PDF (100 KB)

Download auction brochure
Adobe PDF (442 KB)

Last Updated: Monday, April 12 - 12:29 PM Pacific Time

TRIM SAW LINE
16'6" x 29'6" 5 Run Infeed Deck, 10HP drive • 4 Arm Tilt Hoist, 15'4" W, Max package height 67"; Arm Spacings: 52", 53", 75", 10HP drive • 15' x 80" 5 Run Spill Table, H78 Camelback chain; 5 HP drive & Radicon reducer • 2 Saw Trim Table, 22' x 31'L 12 Run Transfer Deck, c/w 11 Roll 60" x 22' Rollcase; (2) 15HP saw arbor motors; 10HP & 2HP drives • (5) Foot pedals • 29' x 16" Waste Conveyor, flighted chain, 5HP drive & Radicon reducer • 29' x 16" Incline Waste Conveyor, flighted chain, 7.5HP drive & Radicon reducer • 51' x 17" Belt Conveyor, 5HP drive w/ 39.4/1 Reliance gear drive  • 28'6" x 18" Belt Waste Conveyor, 5HP drive • 2 Section MCC • GE 10KVA Transformer • Woods Etral AC Inverter, Variable Speed Drive • Operator control console • 18'6" x 32'L 6 Run Transfer, H78 camelback chain; 5HP drive w/ Radicon 30:1 reducer, 230/460V • (6) 32" Kicker arms w/ rollers • (4) Square D 30 amp Switches • Allen Bradley Starters • 200 amp 480V Splitter • Freqrol F-2 460V Variable Frequency Drive, Model FR-F2-H3700-V • (12) Square D 15 amp Switches • 28' x 30" Belt Conveyor, 5HP drive • (6) Kicker Arms w/ Tipple Rolls
6 STRAND CAMELBACK
 
TRIM SAW TABLE
 
TRIM SAW INFEED
 
BELT CONVEYOR
 
2 SECTION MCC

72' x 17' 5 Run Green Chain, w/ 3 runs rolltop chain; 5HP drive w/ 60:1 reducer, 460V • 76' x 17' 5 Run Green Chain, w/ 3 runs rolltop chain, 5HP drive & reducer • Green Chain Building: 160' x 12' w/ lights, etc. • (25) 13' & 17' x 54" 6 Roll Lumber Rolloffs • Custom built 13'W x 50' 4 strand portable green chain, trailer mounted on tandem axle highboy frame w/ 5'3" tilt up section, c/w (2) 3HP drives, side rolls, etc.

GREEN CHAINS
 
GREEN CHAIN ROLL OFFS
 
GREEN CHAIN ROLL OFFS
 
CAMELBACK TRANSFER
 
HULA SAW SYSTEM

MF 2 Saw Hula System, 18" saws; (2) 7.5HP drives, 3500 RPM 230/460V • (5) Foot pedals • 29' x 12" 16 Roll Rollcase • 30' x 16" Belt Conveyor, Leeson 3HP drive & reducer •  21' x 45" 6 Run Chain Infeed Deck • 20' x 24' 7 Run Transfer Deck, H138 camelback chain, Leeson 3HP Wattsaver drive 1180 RPM, 230/460V & Radicon 50:1 reducer • 18'6" x 25'L 6 Run Bar Type Unscrambler, 3HP drive & reducer • 24'6" x 16" Waste Belt Conveyor, 3HP drive & Radicon reducer, 208/230/460V • Trim end drop chute, poly lined • 34' x 30" Belt Conveyor, 5HP drive & Radicon reducer, 230/460V • 12'6" x 16" Belt Conveyor, 5HP drive 230/460V 1750 RPM

7 RUN CAMELBACK
 
HULA UNSCRAMBLER
 
HULA SAWS
 
RESAW LINE

30' x 17'6" 6 Run Transfer Deck, 5HP gear motor, 230/460V • 17'4" 5 Arm Tilt Hoist; Max. package size 64" x 76"; Arm spacings: 52.5", 48", 49", 51"; 20HP drive w/ Radicon reducer, 230/460V • 23' x 18" Stick Belt Conveyor, 5HP 230/460V gear motor  • 12' x 19'6" 5 Run Spill Deck, Plastic camelback chain inserts; c/w drive • Powell 48" Band Resaw, WEG 75HP motor,208/230/460V 1180 RPM; 20' Adjustable line bar infeed, (8) roll, w/ 3HP drive; (2) Spare rebuilt hydraulic motors • 5 HP Hydraulic Support Unit • (2) Sets of (5) Foot Pedals • Controls & Square D Switch • Nordic 100HP Soft Start, 460V, Cat. #2634500

5 ARM TILT HOIST
 
POWELL 48" RESAW
 
RESAW SPILL DECK
 
BELT CONVEYOR
 
NORDIC SOFT START
 
WEINIG MOULDER LINE

Weinig 7 Head 10" Jointed Moulder, Model H22BL; s/n 1835-450; 0 - 200 FPM; Chrome shoes, bit plates, etc.; Motors: 15 & 20HP Bottom, (2) 10HP Right, 15HP Left, 30 & 20HP Top; Heads: (2) 6 knife 6" x 6" diam.; (5) 6 knife 4" x 6" diam.; Spares: New gear box; New spindle for side head; (1) New & (1) Rebuilt spindles for top or bottom head; (2) New Hydro-sleeves; New 20HP drive, 3600 RPM, pulleyed to run @ 6000 RPM • Over 40 Spare Moulder Heads • Siemens 20HP Hydraulic Support Unit, 230/460V  • 1HP Custom Trim Saw • Moulder Brake Cabinet, Arrow Controls, 460V • Black & Decker Cut-off Saw • Granite 15" x 27" x 4" Surface Table • Electrical: (2) 200 Amp Switches; 150 Amp Switch; 100 amp switch; (3) 60 Amp Switches; (21) 30 Amp Switches • (16) Cutler-Hammer Resets • 30 Kvar capacitors; Solenoid valves  • (2) 200 Amp splitter boxes • Freqrol F-2 variable speed drive • 14" x 22' Belt Conveyor Moulder Outfeed; 3HP 208/230/460V • Oregon 14" Chop Saw • Octopus • 1989 Weinig Profimat 22N, serial No. 226-337, 5"x9" 4 head, 480 volts - 3 PH; Heads: Bottom 10HP; Right 7HP; Left 7HP; Top 15HP; Feed 3HP; c/w spare parts & octopus • Weinig Profimat 4 Head Planer; Model RX70D31DT100LA; 90 x 180 mm; 6" Capacity; s/n 15664692 • Diehl DSC-56 5 Head Moulder; s/n 69M-2475-1731; 4"x6" capacity; Feed: 7.5HP; Head config: Bottom - 5HP, Top - 10HP, Out - 5HP, In - 5HP, B - 10HP • New HD Moulder Auto feeder for short pieces (Cost $10,000)

WEINIG 22BL MOULDER
 
WEINIG PROFIMAT 22N MOULDER
 
WEINIG PROFIMAT
MOULDER
 
DIEHL 5 HEAD MOULDER
 
WEINIG 934 GRINDER
 
WEINIG 911 GRINDER
 
WEINIG CONTROLS
 
WEINIG OPERATOR CONSOLE
 
CHOP LINE #1

13'6" X 16' 7 Run Belt Transfer Deck, w/ drive • '98 Precision 18-A Jump Chop Saw, s/n 623; 7.5HP motor, 480V; 6" x 19'6" infeed rollcase, w/ stops; 20' x 12" outfeed w/ stops & 7" belt conveyor • '96 Precision 18-A Jump Chop Saw, s/n 503; 7.5HP motor, 480V; 12" x 18'5" infeed rollcase, w/ stops; 20'x 12" outfeed w/ stops & 7" belt conveyor • 19' Sorting Transfer Table, w/ (2) 33" outside belts & (4) 4" inside belts; 7.5HP motor & reducer  • Suspended 5 Rack Sorter System, 16'6" • 10' x 8" Belt Conveyor, c/w drive • 13' x 13" Incline Waste Belt Conveyor, 3HP 208/230/460V • Square D 100HP Starter, Nema Size 4; 600V • (2) Univeyor 16" x 8'/10' Rollcases

PRECISION 18-A CHOP SAWS
 

Clarage 75HP Blower, 24" x 84"; Size 129; 230/460V • Allied 50HP Blower, 18" x 60"; s/n 1585 • Anderson Size 60 Blower, 50H.P., 575V 1180 RPM S/N 202 • 100 HP Blower, 575V; on steel frame

WADKIN MOULDER LINE

14' x 15'4" 4 Run Infeed Transfer Deck, 10HP 220/440V & Radicon reducer, foot pedal • 1999 Wadkin XK 220 6 Head Jointed Moulder, s/n 99-113; Test #97371; 1 - 250 FPM; Chromed; Control panel; Green & dry cuts; 460V; Purchased in 2000 for $270,000; Motors: 20 & 40HP Bottom; 20HP Right, 30HP Left, 30 & 25HP Top; Heads: (1) 4 knife 6" x 6" diam,; (2) 4 knife 4" x 6" diam.; (3) 6 knife 4" x 6" diam.; Spares: New outside shaft, for top or bottom; Outside shaft; New chip breakers, top & other; (2) casings • 37' x 14" Belt Conveyor Moulder Outfeed, 3HP gear motor •  HP Custom Trim Saw • Electrics: Square D 400 Amp Switch, Cat. CH365 • (3) Capacitors, 60, 30 & 20 Kvar • Allen Bradley 50HP blower switch • Switches: (5) 200 amp; (2) 100 amp; (4) 60 amp; (5) 30 amp • Octopus

CHOP LINE #2

14'4" X 16' 8 Belt Transfer Table, w/ drive & foot pedals • 1997 Precision 18-A Jump Chop Saw, s/n 560; 7,5HP; 20' x 5" infeed w/ stops; 20' x 12" outfeed w/ stops • 14'6" x 26'6" Transfer Table, (1) 34" belt, (6) 4" fabric belts; w/ stops; 5HP gear drive • 21'8" x 14" Belt Conveyor, 5HP gear drive • Electrics: Hammond 15 KVA Transformer, 480/100V; Switches: (3) 60 amp; (7) 30 amp; (7) Stop/starts • (3) Univeyor 23'8" x 12" Rollcases • (3) Univeyor 18' x 12" Rollcases • 25' x 12" Incline Belt Conveyor, 7.5HP 230/460V & reducer • 20' x 53" Metal Sort & Bundle Table • (3) Univeyor 34' x 12" Rollcases • 21'8" x 14" Belt Conveyor, Leeson 2HP drive & reducer • 35' x 28" Incline Belt Conveyor, 5HP drive

CHOP LINE #2 OUTFEED TABLE
 
CHOP LINE #2
 
CHOP LINE INFEEDS
 
CHOP LINE #3

12" x 24' Belt Conveyor w 3HP drive • (2) '97 Precision 18-A Jump Chop Saws, s/n 561 & 272; each w/ 7.5HP 460V; 20' x 12" rollcase infeed w/ stops; 20' x 12" rollcase outfeed w/ stops • 14' x 12' 4 Run Transfer table; w/ (1) 30" & (3) 6" fabric belts; 5.5HP gear drive • 10' x 12" Belt Conveyor, 3HP drive • 8' x 12" Belt Conveyor, 3HP drive • 10'W x 30' 4 Run Outfeed Transfer Table w/ (1) 30" rubber belt & (3) 4" fabric belts • 25' x 8' x 8'H Dump bin w/ roller base • 8' x 10' Metal Sort Table • Mitsubishi S500 AC VFD Controller • 22'x15' 4 strand infeed • 21'x15' 6 strand transfer w/ skid of chain • Scissor Lift, 12'x 5'; 4000lb w/ controls • 5' x 20 ' Belt Conveyor (no motor) • 4' x 10' 3 Strand Transfer w/ 1.5hp drive

COMPRESSORS

Chamco 25HP Compressor; 230/460V • Swan 15HP MN-415 Compressor • Sullair SRD 105 Air Dryer • DeVilbiss 6.5HP Vert Shop Compressor • Active Air 5HP • Puma 2HP Portable, 110V • Manchester Receiving Tank

CHAMCO 25HP COMPRESSOR
 
SULLAIR DRYER
 
SWAN 15HP COMPRESSOR
 
DEVILBISS 10HP COMPRESSOR
 
ROLLING STOCK

'94 Hyster H210XL 20,000LB Forklift; s/n E007D02043R; Diesel, 169" lift; 2 stage mast w/ side shift, enclosed cab • 1986 Cat V300B Diesel Forklift, s/n 72Y01021; Dual Hyd. Fork Positioners; Rebuilt Cat 3208 Engine & transmission, Near new tires, 46" tapered Low Profile Lumber Forks; Welco cab; • '87 Hyster H180 18,000LB Forklift; s/n C007D027694; diesel; 2 stage mast; 212.5" lift; Side shift; Enclosed cab; Dual front tires; Monotrol 3 sp. Trans. • Clark 25,000LB Forklift; Model C500Y5250D; 210' Fork height; Lowered Mast height: 159"; Side shift; Power shuttle transmission; Full cab; Diesel; 51" pallet forks • '98 Hyster H90XL2S 8,000lb Forklift, s/n G005D13794W; Diesel; 169.5" lift; 2 stage mast w/ side shift; (Unit #14) • '90 Hyster H90XL2S 12,000LB Forklift, s/n F5D-4000L; diesel; 169;5" lift; 2 stage mast; side shift; (Unit #12) • '89 Nissan 9000 LB Forklift, propane, 146" lift, 2 stage, Solid cushion tires, S/N BGF03A40V • Spare forklift forks • Forklift Boom • Trucks: GMC Brigadeer 16' flatdeck truck, 671 Detroit Diesel; crane ready; PTO; tires 90% . Ford E-350 14' Cube Van, diesel . Ford 1 Ton Box Van, 12' box . 1992 Chev Pickup truck, propane . Ford Lariat Pickup truck, loaded . Automobiles: BMW 735i Sedan . '88 Dodge Aries K; 193,000 kms; 2.5L 4cyl.; sunroof; mechanically sound . Recreational: Frontier 8' camper, 3 way power, head . Crestliner 18 1/2' Aluminum Boat, Mercury 90HP outboard; canopy, c/w trailer . Honda 350 4TRAX 4 x 4 Quad . 16' Hard top Pop-up tool trailer

HYSTER 20,000LB FORKLIFT
 
CAT V300D 30,000LB FORKLIFT
 
HYSTER 20,000LB FORKLIFT
 
HYSTER 8,000LB FORKLIFTS
 
HYSTER 12,000LB FORKLIFT
 
HYSTER 18,000LB FORKLIFT
 
NISSAN 9,000LB FORKLIFT
 
ALLIS ELECTRIC FORLKIFT
 
GMC 16' FLATDECK
 
16' POP-UP TOOL TRAILER
 
BMW 735i SEDAN
 
1990 FORD LARIAT PICKUP
 
HONDA 350 4TRAX 4 x 4 QUAD
 
CRESTLINER 18.5' ALUM BOAT
 
FRONTIER 8' CAMPER
 
FINGER JOINTER

1998 Concepcion CRP2000 Finger Jointer; Model 2282; s/n J100B; Incl. Semi-automatic feeder; Double shaper w/ glue applicator; Assembly Self-feeder w/ Auto Corner Transfer; Assembly Machine; Press w 16" cut-off blade, 12,000LB force; Auto press Length Adjustment; Input: Max 120 pces/min; Output: Max 200 fpm; Hard & soft wood; Final pressed length up to 30' (9.15m); New 1998 price - $425,000. (NOTE: Finger Jointer is located in Abbotsford, BC, approx. 30 minutes from the Tyee auction site. It can be previewed by appointment, or on preview day, and will be sold from the Tyee site during the auction). This item only sold high bid subject to owner's approval.

CONCEPCION FINGER JOINTER
 
CONCEPCION FINGER JOINTER
 
CONCEPCION FINGER JOINTER
 

 

 

 

 
GENERAL EQUIPMENT

Carothers 27 Unit Chip Bin & 12.5 unit Cyclone • Peerless 16 Unit Chip Bin w/ Frame and Cylinders • Schutte 1320 Drop Feed Wood Waste Grinder, 12 3/4" x 18" feed opening, New Baldor 40HP 3600 RPM 600V drive motor; Near new cond. • Vecoeton Wood Waste Grinder S/N TA 70/85D • Hydraulic Unit w/ (4) 15 H.P. motors • Wadkin Bursgreen 3" x 12" Multi-Rip Saw; s/n BSM 72298; Open sided; 40HP • Eavam 18" Gang Rip Saw, 50HP drive, 2HP feed • Spare 36" resaw blades • 5HP 18" Blower, Side infeed/top discharge • Acme E41 Package Strapper, Lumber Press & Spray Line; c/w hyd. power unit • 2-Saw Hula Saw Table w/ 35'x12" conveyor w/ 5 HP motor , disconnects and (2) footpedals • Sweed 505AA Scrap Chopper, s/n 12-89-0137 • (7) 4' x 6' Motorola 2 way radios • Packaging Cage c/w air motors • (2) Saftronics Variable Speed Drives, 100 & 150HP • 600 Amp 600V Transformer • Easy Empty steel scrap forklift bins, 4' x 8'; 64" x 8'; (3) 5' x 90"; (2) 4' x 90" • (3) Banding Carts & tools • Steel & plastic strappers w/ tools • (4) 4 Wheel Lumber Carts • Lumber Wrap Carts • -Approx. (8) dollies & carts • (3) Mobile Trucks pallet jacks • Approx. (15) Staple guns • Spare sprockets & sheaves • Fire Extinguishers o, Rubber wheels • (2) Bank of 8 wall hung lockers • First Aid Room: Bed, exam chair, O2 kit, stretcher, spinal board, supplies • (2) Lunch Rooms: Admiral fridge, Danby microwave, (2) 11' Fir picnic tables • Office Equipment • Much more.

WADKIN 3 X 12 RIP SAW
 
1 OF 2 GANNER MDG-P950 SPINDLE DRILLS
 
RAM-TECH AUTO FEEDER
 
MOBILE GREEN CHAIN
 
CAROTHERS 27 UNIT
CHIP BIN & CYCLONE
 
CYLONE
 

Woodworking Equipment: SCM D-80K Double End Tennoner • Huellshorst 14411B Double End Tennoner, s/n 10798/2 • Altendorf F-90 Sliding Panel Saw, s/n 68-7-63 • Akhurst Turbosand 4 step double panel raise sander, incl. (4) 3HP turbo sanding heads (Cost $ 40,000) • Guillet & Fils 16" Jointer • Kosweig Thickness Planer • Maweg Double Sided Sander, S/N SE273090041205 • Jet planer/jointer • Canwood/Makita Mortiser/Router, Model RFLL01 • ME Marson 3HP Dust Collection System • Beaver 16" band saw • Powered dust brush for flush doors • Platform Scale • HD Mixer w/ 2 baskets & pumps • Craftex " Wood Shaper (Biscuit Cutter), 2 stations; 1 .5HP 2600 RPM • Ultra-violet Drying Units

SCM DOUBLE END TENNONER
 
AMERICAN MULTI-RIP SAW
 
PANEL SANDER
 

Grinding Room: Weinig 934 Grinder, s/n 934-942 . Weinig 911 Knife Grinder, S/N 214/250 . United Tool Grinder . Spare Moulder Heads: Dry (22 degree cutting angle 50mm straight bore): (6) 6 knife 9" x 6" diam.; (3) 8 knife 9" x 6.5" diam.; (14) 6 knife 4" x 6" diam.; (2) 6 knife 6" x 6" diam.; (2) 8 knife 6" x 6" diam.; (2) 6 knife 2" x 6" diam.; (2) 8 knife 2" x 6" diam.; (1) 3 knife 2" x 5.5" diam. . Green (30 degree cutting angle 50mm straight bore): (4) 4 knife 6" x 6" diam.; (1) 6 knife 6" x 6" diam.; (2) 4 knife 3" x 6" diam.; (1) 6 knife 2" x 6" diam. . Splitter set for 2" eased edge . 50mm Multirip hydro-sleeve w/ 6 saw blades . Spare band saw & circular saw blades . Grinding wheels . Setup stand . Moulder head cart . (3) Wanner Pressure Grease Guns . (80) Boxes of 1 " & 3" L Knives- various profiles More.

UNITED TOOL GRINDER
 

Shop Tools & Equipment: Lincoln Idealarc 500 amp stick welder • Crown HD 2HP 12" double grinder, 1725 RPM 220/440V • (2) 5" vises • Die grinder • Makita 2401B 255mm mitre saw • (3) Delta Bench Drill Presses • Arbor press • Metal work benches • Demag 5 Ton Overhead Crane, 24' Double Girder w/ 6 way controls • Budgit 1 ton electric chain hoist on 8' boom • Tecomaster table saw • Stihl D25 17" chainsaw • Hitachi Spool Nail Gun • Weed Eater • Chains • Wrenches, socket and open • Shovels • Hammers • Fluids, cleaners, lubricants • More. • Measuring: Kanon .001" In/outside Calipers • 0-150mm/6" Electronic Digital Calipers • Mitutoyo CD-6"CS Electronic Digital Calipers • Starrett S167C Radius Gage Set • Hanetsu Magnetic Base w/ Newcon Dial Indicator • Starrett No.98 6" Machinist Level, ground vial, cross test level • Bearing stethoscope • Needle files • More. • Spare Motors: 20HP 230/460V • WEG 10HP drive; 208/230/460V 1765 RPM w/ Highfield 40:1 reducer • GE 50HP 440V 1800 RPM; Frame 444 • 5HP 208/340/460V • 3HP 230/460V • 5HP 230/460V 1200 RPM • Westinghouse 7.5HP TFFFT, 230/460V 1740 RPM • WEG 3HP 208/230/460V  • 10HP 575V 1720 RPM • 5HP 200/220/440V 1760 RPM • 15HP 230/460V • 5HP 208/230/460V 1725 RPM • 10HP 220/440V 1160 RPM • 15HP 440V 1760 RPM • Eurodrive 1HP 50:1 Gear Motor • 30HP saw arbor motor • Spare Reducers: Highfield #6 31:3 • Highfield #8 • Highfield #4 • Radicon #5 • Radicon #6 50:1 • (2) Highfield #6 • Higear #7 50:1 • Opperman PF-5 20:1 • Small 10:1 • More.

CRAFTEX WOOD SHAPER
 
VECOETON TA-7085D GRINDER
 
SCHUTTE WOOD WASTE GRINDER
 
MAWEG SANDER
 
ALTENDORF PANEL SAW
 
LUMBER PRESS PAINT LINE
 
SWEED SCRAP CHOPPER
 
10HP BLOWER
 
ELECTRICS, VFD'S, ETC
 
BELT CONVEYOR
 
CAMEL SPILL DECK
 
4 X 15HP HYD. POWER UNIT
 
UNIVEYOR ROLLCASE
 
UNIVEYOR ROLLS
 
12' x 5' 4000 LB SCISSOR LIFT
 
WHEATLAND 505-04 SILO
 
CONTACT INFORMATION
For additional information, or for viewing arrangements, contact Ken Ardiel at Tradewest.
Telephone: 604-530-9351
Fax: 604-530-0194
Email: sales@tradewestsales.com

Back To Top