UNRESERVED SAWMILL & PLANER MILL

 

AUCTION

 

Due to voluntary closure of mill operations of


WOODHAVEN HOLDINGS LTD.

 

Auction Date: THURSDAY, AUGUST 16TH - 12 NOON
Preview Date: Auction day, 8am - 12 NOON
Location:

Hwy. 95 at Greenwood Rd., Edgewater (Radium), BC

Download auction brochure
Adobe PDF (2.3 MB)

Download auction catalogue
Adobe PDF (104 KB)


Last Updated: Wednesday, August 15, 2007 - 1:10 PM Pacific Time

DEBARKER LINE
  • 30’W x 18’L Log landing deck
  • (2) Strand Log Trough, 30’ x 16”
  • 7 Arm kicker
  • 48” Circular log cut-off saw, 40HP 230/460V
  • 12 Roll Hourglass outfeed
  • Cambio Kockums 18” ring debarker, s/n 4306 Operator booth & setworks
  • 10 Roll Debarker outfeed, 35’ x 31”, incl. (8) hourglass rolls, kickoffs
  • Kockums hyd. power unit, (4) 10HP drives • 35’ x 16” Box chain incline conveyor
  • Durand 10HP hyd. power unit
LOG LANDING DECK
LOG CUT-OFF SAW
CAMBIO KOCKUMS 18 " DEBARKER
DURAND 10HP HPU
HOURGLASS ROLLCASE
OPERATOR CONSOLE
KOCKUMS 4 X 10HP HPU
INCLINE WASTE CONVEYOR
OUTFEED ROLLCASE
MAJOR EQUIPMENT

Scragg Saw Line #1:

  • 4 Strand Log Transfer, 23’L x 11’W; 5HP
  • 4 Strand small log unscrambler, 15’H x 11’W flighted chain, 7.5HP 230/460V
  • 6 Strand Long log infeed transfer, 22’W x 20’L, 10HP
  • 6 Arm kicker
  • 35’ 2 chain log conveyor, bi-directional
  • 77’ single chain conveyor
  • 33’ (18) Roll hourglass rollcase
  • 2 way hyd. kickers
  • Flighted chain waste conveyor, 10” x 20’L
  • Hyd. power unit
  • Norley 2 Saw Scragg Saw; 100HP; 40’ sharp chain feed
  • 12” x 56’ Waste conveyor, 10HP
  • 4 Strand Camelback transfer, 6’W x 7’L
  • Scragg operator console
  • Spare scragg saw blades
  • 20’ x 12” Belt Conveyor

Scragg Saw Line #2:

  • 2 Saw End Dog Scragg, on chain bar bi-directional feed, w/ control
  • 100’ x 12” flighted chain waste conveyor & drive
  • 2 Strand scragg infeed transfer, 52” x 13’L
  • Hydraulic kicker

Edger Line #1:

  • 4 Roll Edger Infeed, 21” x 6’
  • 14” x 6” Edger, 100HP
  • 15’L x 18” outfeed rolls
  • 4 Strand camelback transfer, 7’4” x 7’L; 5HP
  • 2 Saw Trim Table, 10 & 15HP arbor motors; 11’W x 10’L lugged transfer
  • 3 Strand Green Chain, 17’L x 8’6”W, X18 chain, 5HP
  • 29” x 14” Incline belt conveyor, 5HP
  • Foot pedals
  • 2 Strand green chain, 54” x 22’, 5HP
  • Belt conveyor, 14” x 27’; 5HP
  • 2 Roll transfer, 5HP • 60’ x 10” Waste belt conveyor
  • 7.5HP Hyd. power unit
  • 10HP & 20HP dual hyd. power unit
  • Air receiving tank
  • Edger & trim saw blades

Edger Line #2:

  • Single Arbor 48” x 8” edger, 60HP
  • 3 Strand edger infeed transfer, 7’3” x 21’; 5HP
  • 4 Roll edger infeed, 45” x 9” diam. rolls
  • (2) Foot pedals
  • 4 Strand Green Chain, 11”W x 36’L; 5HP
  • (3) 10’ Univeyor rollcases
  • 8’ Univeyor rollcase
  • 5’ Univeyor rollcase
  • Single Arbor 4” x 26” edger, 6 saws; splined arbors, on skid frame

Head Saw:

  • 3 Strand Log Infeed Transfer, 10’6”W x 17’L; 10HP
  • 48” Head Saw
  • 3 Dog Log Carriage on 45’ track
  • Saftronics Soft Start
  • Setworks & controls
  • (3) Jockey Blade Grinders
NORLEY 2 SAW SCRAGG
2 SAW SCRAGG
HEAD SAW & CARRIAGE
3 DOG LOG CARRIAGE
48" X 8" EDGER
14' X 6" EDGER
4' X 26" EDGER
2 SAW TRIM TABLE
PLANER LINE
  • 4 Strand package breakdown, 12’W x 21’L
  • (16’) 4 Arm Tilt Hoist, 53” arms
  • 12” x 20’ Stick belt
  • 5 Strand landing deck, 16’W x 10’L
  • 2 Saw Trim table, 5 strand lug chain transfer, 10’ x 11’W; 7.5HP 3510 RPM WEG arbor motors
  • Planer Infeed, w/ 6 spiral rolls, 38” x 6 ½”, w/ pineapple feed rolls
  • Almac Beaver 49 6 knife planer, 6” x 12”; s/n P-1700; 75HP
  • 16’ x 15” Outfeed belt conveyor
  • Operator control console
  • 5 Strand camelback transfer, 10’ x 7’L; H78B chain
  • Single saw trim table, 11’5” x 10’L 5 Strand lugged chain transfer
  • 3 Strand green chain, 10’6” x 30’
  • Planer Building, wood framed
BEAVER 49 6 KNIFE PLANER
16' 4 ARM TILT HOIST
5 RUN LANDING DECK
2 SAW TRIM TABLE
OPERATOR PANEL
FOOT PEDALS
SKATE ROLLS
SPIRAL PLANER FEED ROLLS
PINEAPPLE ROLLS
PLANER PACKAGE BREAKDOWN
16' PLANER OUTFEED BELT
5 STRAND CAMELBACK TRANSFER
SINGLE SAW TRIM TABLE
30' X 10'6" GREEN CHAIN
ELECTRICS
  • FPE 800 Amp Main Switch
  • Allen-Bradley 5 Section Centerline MCC, 20 switches
  • (2) Allen-Bradley 4 section MCC’s, 17 switches
  • SAF soft start
  • (2) New OPAL SAF Soft Starts
  • Switches: Siemens, Square D & FPE 600, 400, (3) 200, 100, (6) 60 & (6) 30 amp
  • (11) Switches & resets
  • Allen Bradley 100HP soft start
  • Acme Polygon 25KVA transformer, Primary 502V – 240/120V
  • Teck cable & lighting throughout 3 mill buildings & site
  • (4) Spare CGE sodium lights
  • Electric supplies & spares
  • (3) 75 kVA Transformers, poles & switch
  • Yard lights
  • Spare 100HP motors
SIEMENS 600 AMP
MAIN SWITCH
3 POLE TRANSFORMERS
ALLEN-BRADLEY
4 SECTION MCC
ALLEN-BRADLEY
4 SECTION MCC
ALLEN-BRADLEY
5 SECTION MCC
FPE 800 AMP MAIN SWITCH
NEW OPAL SAF SOFT STARTS
OPERATOR PANEL
SAF SOFT START
SAFTRONICS SOFT START
SPARE MOTORS
TECK CABLE
WALL OF ELECTRICS
WALL OF ELECTRICS
ELECTRICAL SPARES
CHIPPING SYSTEMS
  • Edem 20’ balanced vibrating conveyor
  • Precision Husky 48” x 11” chipper, s/n C.256; 900 RPM; side feed, top discharge; 100HP
  • 48” 6 Knife chipper, side feed, bottom discharge, 40HP
  • 11 ½” x 40’ Flighted waste conveyor, 3HP
  • 12” x 20’ box chain incline conveyor
  • 8’ Hopper w/ screw auger feed to screen
  • 5’ Cyclone
  • 4’ x 9’ Chip Screen
  • Fines return conveyor, 8” x 20’
  • 11” x 30’ incline chain conveyor, bottom flighted
  • 24” Blower, 7.5HP 230/460V, w/ hopper
  • 36” 40HP Blower
  • Cyclone & blower pipe
  • Waste conveyor, 9 ½” x 70’
  • 10” x 40’ flighted incline conveyor
PRECISION HUSKY 48" CHIPPER
48" 6 KNIFE CHIPPER
EDEM 20' BALANCED VIBRATING CONVEYOR
4' X 9' CHIP SCREEN
24" 7.5HP BLOWER
40HP BLOWER
EDEM 20' BALANCED
VIBRATING CONVEYOR
FINES RETURN BELT
INCLINE WASTE CONVEYOR
PRECISION HUSKY 48" CHIPPER
GRINDING ROOM
  • Hanchett 54DN flat knife grinder
  • Dependable face grinder
  • Flat knife grinder
  • Acme post grinder
  • (2) Metal cutting horizontal band saws
  • Numerous planer heads
HANCHETT 54DN FLAT KNIFE GRINDER
DEPENDABLE FACE GRINDER
FLAT KNIFE GRINDER
ACME POST GRINDER
(3) JOCKEY SHARPENERS
SPARE PLANER HEADS
WALL OF SAW BLADES
GRINDING ACCESSORIES
GENERAL
  • Gardner Denver 25HP compressor
  • Lister 11Kw Diesel Genset
  • (2) Lincoln SA-200 mobile welders, gas
  • Lincoln 225/125 amp AC/DC welder
  • Utility 48’ x 8’ storage container
  • (3) Samuel strapping carts
  • Wadkin Bursgreen radial arm saw
  • Wrap stand
  • (2) Fuel tanks, hoses & nozzles
  • (30) Concrete lock blocks
  • Banding tools carts & crimpers
  • 1 st Aid Room
  • Welding table
  • Spare tires: (2) 1800 x 25 950; (4) 1600 x 24 950
  • Shop: Air, power & hand tools
  • Princess drill press
  • Jet 6” vise
  • Skil saws
  • Pullers
  • Power Fist 3/4HP 8” bench grinder
  • Rails, Fence Posts & Lumber Inventories
  • All Sawmill & Planer Mill Buildings, metal roofing, lighting, teck cable, air & water systems, etc.
GARDNER DENVER 25HP COMPRESSOR
UTILITY 40' X 8' CONTAINER
7.5HP HYDRAULIC POWER UNIT
HYDRAULIC POWER UNIT
BANDING CART
ROLLING STOCK
  • Hyster Challenger 180 18,000LB forklift, 12’4” mast, 20’ lift; diesel, pneumatic tires
  • IHC 5 th wheel yard truck, Cummins diesel, runs well
  • Fiat Allis HD21 Dozer w/ winch
  • Austin Western Grader
  • Atco 20’ 5 th Wheel Gooseneck Trailer, w/ hoist
  • Chev 16’ Flatdeck truck
  • IHC 20’ Flatdeck Truck, w/ hoist
  • IHC I16’ Flatdeck Truck
  • IHC Single Axle 5 th Wheel Tractor
  • Chevrolet station wagon
  • Buick Sedan
  • Single Low Profile Sleeper Cab
  • Ford 8N Farm Tractor w/ wood saw attachment
  • (4) Log bunks
  • 38,000LB Tandem truck clip
  • Cat 966-B radiator
  • Pickup truck side rails
  • Forklift extensions
FIAT ALLIS HD21 DOZER
HYSTER CHALLENGER 180
18,000LB FORKLIFT
IHC 5TH WHEEL YARD TRUCK
SHOP EQUIPMENT
LINCOLN SA-200 MOBILE WELDER
LINCOLN 225 AMP WELDER
HOR. METAL BAND SAW
METAL BAND SAW
PARTS WASHER
PRINCESS DRILL PRESS
BOLT BINS & CONTENTS
SHOP TOOLS
INVENTORY
Bearings, chain, teck cable, hydraulic couplings, hydraulic hose, sprockets, sheaves, hose, spare motors & reducers, bolt bins, belts, hose, hyd. fittings & bins, spare saw blades, “O” ring supplies, cylinders.
O-RING KITS, ETC.
PILLOW BLOCK
& CYLINDER INVENTORY
SODIUM LIGHTS
SPARE BLADES
LOG CUT-SPAR
CYLINDERS, ETC.
SPROCKETS, CHAIN, ETC
TRANSFERS & CONVEYORS
(3) SKATE ROLLS
1 & 2 CHAIN LOG TROUGHS
2 STRAND GREEN CHAIN
3 STRAND GREEN CHAIN
33' X 18 HOURGLASS ROLLCASE
6 STRAND LOG DECK
35' BELT CONVEYOR
ASSORTED TRANSFERS & ROLLS
BOX CHAIN INCLINE CONVEYOR
EDGER INFEED ROLLS
FLIGHTED WASTE CONVEYOR
LARGE LOG SCRAGG INFEED
LIVE ROLLS
LOG UNSCRAMBLER
SLAB TRANSFER DECK
SMALL LOG DECK
TERMS OF SALE
PAYMENT: Full payment – day of sale by Wire Transfer, Cash, Visa, Mastercard or Company Cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. No Personal cheques. Full payment must be made before removal of purchase. There will be a 12% buyer's premium at this sale.  All items in auction subject to additions & deletions. REMOVAL: All items must be removed by 4pm, Friday, August 31, 2007. All buildings must be removed by 4pm, Friday, September 28, 2007. Purchasers are responsible for loading and removal.  Everything is sold “as is, where is.” All sales final. While quantities and descriptions are believed to be accurate, the auctioneers, owners, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. No warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. Please take advantage of our preview and inspection period. NOTICE TO U.S. BUYERS: 1. Most equipment manufactured in the United States returns duty free. 2. Canadian sales tax is not applicable on goods shipped out of the country. 3. Purchases are payable in Canadian funds. At time of printing the US dollar is worth $1.07 Canadian.
ABSENTEE BIDS
If you are unable to attend this auction, you may register a confidential bid with Tradewest. Tradewest will exercise your bid at the auction, ensuring that you pay only the amount the item sells for, not necessarily the full amount of your bid. Absentee bids are permitted only with pre-registration and receipt by Tradewest of a 25% deposit. Call Tradewest for complete information.
Download Absentee Bid Form
Adobe PDF (50 KB)
CONTACT INFORMATION
For additional information contact our office:
Office: Tel. (604) 530-9351
Auction Site: Tel./Fax (604) 347-0033
Email: sales@tradewestsales.com

 


Back To Top